Email Alert  RSS
综述

改性元素对镍基合金表面铝化物涂层组织和性能的影响

展开
  • 1.武汉材料保护研究所有限公司,湖北 武汉 430030; 2.特种表面保护材料及应用技术国家重点实验室,湖北 武汉 430030
吴 勇(1962-),研究员,主要从事表面热处理及铝化物涂层研究,E-mail:ywurimp@sina.com

收稿日期: 2022-09-23

  修回日期: 2022-10-15

  录用日期: 2022-11-07

  网络出版日期: 2023-03-15

基金资助

国家重点研发计划(2020YFB2010400);国家自然科学基金面上项目(52175182);湖北省重点研发计划项目(2021BAA210)资助

Effect of Modifying Elements on Microstructure and Properties of Aluminide Coating on Nickel-Based Alloy

Expand
  • 1.Wuhan Research Institute of Materials Protection Co.,Ltd.,Wuhan 430030,China; 2.State Key Laboratory of Special Surface Protection Materials and Application Technology,Wuhan 430030,China

Received date: 2022-09-23

  Revised date: 2022-10-15

  Accepted date: 2022-11-07

  Online published: 2023-03-15

摘要

单一铝化物涂层存在抗高温氧化性能及抗高温热腐蚀性能不足等问题,添加改性元素可以改变铝化物涂层的组织成分,添加改性元素通过影响氧化膜的转变与脱落、铝元素和氧元素的扩散,从而影响涂层的抗氧化性以及抗热腐蚀性能,改变涂层的力学性能。梳理了近年来有关改性元素对铝化物涂层的组织结构、抗氧化性能、抗热腐蚀性能以及力学性能的影响的相关研究,展望了未来镍基合金上改性铝化物涂层的发展方向。

本文引用格式

孟施旭, 吴勇, 夏思瑶, 孙清云, 夏春怀, 杨汉哲, 杜建融 . 改性元素对镍基合金表面铝化物涂层组织和性能的影响[J]. 材料保护, 2023 , 56(3) : 114 -123 . DOI: 10.16577/j.issn.1001-1560.2023.0067

Abstract

Single aluminide coating has shortcomings such as insufficient resistance to high-temperature oxidation and high-temperature thermal corrosion.The addition of modifying elements can change the structural composition of the aluminide coating.The addition of modifying elements affected the oxidation resistance and thermal corrosion resistance of the coating by affecting the transformation and detachment of the oxide film,as well as the diffusion of aluminum and oxygen elements,and changed the mechanical properties of the coating.In this paper,the studies on the effects of modifying elements on the microstructure,oxidation resistance,thermal corrosion resistance,and mechanical properties of aluminide coatings in recent years were summarized.And the development direction of modified aluminide coating on nickel-base alloy in the future was prospected.

参考文献

[1] 孙晓峰,金涛,周亦胄,等.镍基单晶高温合金研究进展[J].中国材展,2012,31(12):1-11.SUN X F,JIN T,ZHOU Y Z,et al.Research Progress of Nickel-base Single Crystal Superalloys [J].Materials China,2012,31(12):1-11.

[2] 唐中杰,郭铁明,付 迎,等.镍基高温合金的研究现状与发展前景[J].金属世界,2014,171(1):36-40.TANG Z J,GUO T M,FU Y,et al.Research present situation and the development prospect of nickel-based superalloy[J].Metal World,2014,171(1):36-40.

[3] GOWARD G W,BOONE D H.Mechanisms of formation of diffusion aluminide coatings on nickel-base superalloys[J].Oxidation of Metals,1971,3(5):475-495.

[4] DAS D K,JOSHI S V,SINGH V.Effect of Prealuminizing Diffusion Treatment on Microstructural Evolution of High-Activity Pt-Aluminide Coatings[J].Metallurgical and Materials Transactions A,2000,31(8):2 037-2 047.

[5] KRISHNA G R,DAS D K,SINGH V,et al.Role of Pt content in the microstructural development and oxidation performance of Pt - aluminide coatings produced using a high-activity aluminizing process[J].Materials Science &Engineering A,1998,251(1/2):40-47.

[6] 于 晓.K438 镍基合金表面改性铝化物涂层的热腐蚀行为研究[D].昆明:昆明理工大学,2019.YU X.Study on Hot Corrosion Behavior of Surface Modified Aluminate Coating on K438 Nickel-based Alloy[D].Kunming: Kunming University of Science and Technology,2019.

[7] YANG Y F,JIANG C Y,ZHANG Z Y,et al.Hot corrosion behaviour of single-phase platinum-modified aluminide coatings: Effect of Pt content and pre-oxidation[J].Corrosion Science,2017,127:82-90.

[8] NOURI S,RASTEGARI S,MIRDAMADI SH,et al.Microstructure and oxidation resistance of Si modified aluminide coating on TiAl based alloys[J].Surface Engineering,2015,31(12):930-933.

[9] FAN Q X,JIANG S M,YU H J,et al.Microstructure and hot corrosion behaviors of two Co modified aluminide coatings on a Ni-based superalloy at 700 ℃[J].Applied Surface Science,2014,311:214-223.

[10] ZAGULA-YAVORSKA M,SIENIAWSKI J.Cyclic oxidation of palladium modified and nonmodified aluminide coatings deposited on nickel base superalloys[J].Archives of Civil &Mechanical Engineering,2018,18(1):130-139.

[11] PFEIL L B,GRIFFITHS W T.Improvement in heat-resisting alloys: EP459848[P].1937-10-07.

[12] WANG Y Q,SUNESON M,SAYRE G.Synthesis of Hfmodified aluminide coatings on Ni - base superalloys[J].Surface and Coatings Technology,2011,206 ( 6):1 218-1 228.

[13] WANG Y Q,SUNESON M.Synthesis and cyclic oxidation resistance of Hf Modified aluminide coatings on Ni-and Co-Base superalloys:Aeromat 22 Conference and Exposition American Society for Metals[C].Long Beach: ASM International,2011: 1 862-1 866.

[14] 朱 明,王明静,杨 超.K38G 合金表面铬铝涂层的抗高温氧化性能[J].材料热处理学报,2014,35(3):172-176.ZHU M,WANG M J,YANG C.High temperature oxidation resistance of Cr-Al thermal diffusion coatings on K38G superalloy[J].Transactions of Materials and Heat Treatment,2014,35(3):172-176.

[15] 范其香,于昊君,谭晓晓,等.镍基高温合金Pt/Si 共改性铝化物涂层的制备及抗高温氧化性能[J].材料保护,2018,51(6):44-48.FAN Q X,YU H J,TAN X X,et al.Preparation and High-Temperature Oxidation Resistance of Pt /Si Co -Modified Aluminide Coating on Ni -Based High-Temperature Alloy[J].Materials Protection,2018,51(6):44-48.

[16] 安涛峰,管恒荣,孙晓峰,等.氧化物相变对渗铝镍基合金高温氧化行为的影响:第四届全国表面工程学术交流会论文集[C].北京:中国机械工程学会,2001:170-173.AN T F,GUAN H R,SUN X F,et al.Influence of Oxide Phase Transformation on High Temperature Oxidation Behaviors of Nickel-based Superalloy with Aluminide Diffusion Coating: Proceedings of the Fourth National Symposium on Surface Engineering[C].Beijing: Chinese Mechanical Engineering Society,2001:170-173.

[17] RASTEGARI S,ARABI H,ABOUTALEBI M R.A study on the microstructure changes of Cr - modified aluminide coatings on a nickel-based superalloy during hot corrosion[J].Canadian Metallurgical Quarterly,2008,47(2):223-232.

[18] ZHANG H,SUN J.Effect of Y2 O3 or CeO2 Fillers on the Oxidation Behavior of Aluminide Coatings by Low-temperature Pack Cementation[J].Rare Metal Materials and Engineering,2015,44(11):2 628-2 632.

[19] BO B,GUO H,HUI P,et al.Cyclic oxidation and interdiffusion behavior of a NiAlDy/RuNiAl coating on a Ni-based single crystal superalloy[J].Corrosion Science,2011,53(9):2 721-2 727.

[20] 张丽民,刘邦武,刘淑凤,等.稀土改性Fe-Ni 基涂层的高温性能[J].中国有色金属学报,2011,21(12):3 115-3 119.ZHANG L M,LIU B W,LIU S F,et al.High-temperature properties of Fe-Ni based coating doped with RE[J].The Chinese Journal of Nonferrous Metals,2011,21 (12):3 115-3 119.

[21] TAEHTINEN S,LAUKKANEN A,SINGH B N.Damage mechanisms and fracture toughness of Glid Cop CuAl25 IG0 copper alloy[J].Journal of Nuclear Materials,2000,283(4):1 028-1 032.

[22] 刘德波,张萍.La2 O3 改性渗铝涂层的抗高温氧化性能研究[J].热加工工艺,2015,44(12):167-169.LIU D B,ZHANG P.Study on Antioxidant High Temperature Properties of Aluminized Coating Modified by La2O3[J].Hot Working Technology,2015,44(12):167-169.

[23] SVENSSON H,CHRISTENSEN M,KNUTSSON P,et al.Influenceof Pt on the metal-oxide interface during high temperature oxidation of NiAl bulk materials[J].Corrosion Science,2009,51(3):539-546.

[24] HEO N H,KIM M T,SHIN J H,et al.Simultaneous chromizing and aluminizing using chromium oxide and aluminum: (II) on austenitic stainless steel[J].Surface and Coatings Technology,2000,124(1):39-43.

[25] STREIFF R,BOONE D H.Corrosion Resistant Modified Aluminide Coatings[J].Journal of Materials Engineering and Performance,2013,22(10): 2 801-2 812.

[26] ALLAM I M,AKUEZUE H C,WHITTLE D P.Influence of small Pt additions on Al2O3 scale adherence[J].Oxidation of Metals,1980,14(6):517-517.

[27] JACKSON M R,RAIRDEN J R.The aluminization of platinum and platinum-coated IN-738[J].Metallurgical Transactions A,1977,8(11):1 697-1 707.

[28] STREIFF R,CERCLIER O,BOONE D H.Structure and hot corrosion behavior of platinum-modified aluminide coatings [J].Surfaceand Coatings Technology,1987,32(1-4):111-126.

[29] 任 鑫,王福会,汪 信.两种铝化物涂层在固态盐和水蒸气综合作用下的腐蚀行为[J].腐蚀科学与防护技术,2005,17(1):8-11.REN X,WANG F H,WANG X.Corrosion Behavior of Two Aluminide Coatings in Presence of a Solid NaCl Deposite in O2 Plus Water Vapor at 700 ℃[J].Corrosion Science and Protection Technology,2005,17(1):8-11.

[30] 何大雄,管恒荣,姜晓霞,等.钯改性镍基高温合金铝化物涂层的组织和热腐蚀性能[J].航空材料学报,2000,20(1):27-32.HE D X,GUAN H R,JIANG X X,et al.Structure and High Temperature Hot Corrosion of Palladium-modified Aluminide Coatings on Nicke-l base Superalloy[J].Journal of Aeronautical Materials,2000,20(1):27-32.

[31] SHIRVANI K,SAREMI M,NISHIKATA A,et al.Electrochemical study on hot corrosion of Si-modified aluminide coated In-738LC in Na2SO4-20%NaCl melt at 750 ℃[J].Corrosion Science,2003,45(5):1 011-1 021.

[32] 吴多利,张洪宇,韦 华,等.4 种改性的铝化物涂层对DZ38G 合金热腐蚀性能的影响[J].中国腐蚀与防护学报,2014,34(6):502-506.WU D L,ZHANG H Y,WEI H,et al.Hot Corrosion Behavior of Four Modified Aluminide Coatings on DZ38G Alloy[J].Journal of Chinese Society for Corrosion and Protection,2014,34(6):502-506.

[33] AARMEHR S A,SHIRVAIN K,SOLIMANI A,et al.Effects of Pt and Si on the low temperature hot corrosion of aluminide coatings exposed to Na2SO4-60mol%V2O5 salt[J].Surface and Coatings Technology,2019,362:252-261.

[34] AZARMEHR S A,SHIRVANI K,Schütze M,et al.Microstructural evolution of siliconplatinum modified aluminide coatings on superalloy GTD-111[J].Surface and Coatings Technology,2017,321:455-463.

[35] LIU R D,JIANG S M,YU H J,et al.Preparation and hot corrosion behaviour of Pt modified AlSiY coating on a Nibased superalloy [J].Corrosion Science,2016,104:162-172.

[36] MATEUSZ K,ADAM P,MICHAL K,et al.Heat-Resisting Aluminized Coatings Modified by Chromium Addition Produced on Nickel-Based Alloys[J].Transactions of the Indian Institute of Metals,2018,71(12):2 919-2 931.

[37] 夏思瑶.CVD 法制备钯改性铝化物涂层工艺及性能研究[D].北京:机械科学研究总院,2020.XIA S Y.The Process and Performance of Palladium Modified Aluminide Coatings Deposited by CVD Method[D].Beijing: China Academy of Machinery Science and Technology,2020.

文章导航

/