Cu对低碳钢耐腐蚀和抑菌性能的影响
收稿日期: 2022-08-17
修回日期: 2022-09-20
录用日期: 2022-10-05
网络出版日期: 2023-08-11
基金资助
重庆科技学院研究生科技创新项目(YKJCX2120220)资助
Effects of Cu Content on the Corrosion Resistance and Antibacterial Property of Low Carbon Steels
Received date: 2022-08-17
Revised date: 2022-09-20
Accepted date: 2022-10-05
Online published: 2023-08-11
于硕硕, 徐正萌, 唐远寿, 司宇, 周新, 杨淏程, 栗克建, 马毅龙, 葛一波 . Cu对低碳钢耐腐蚀和抑菌性能的影响[J]. 材料保护, 2023 , 56(2) : 16 -23 . DOI: 10.16577/j.issn.1001-1560.2023.0030
[1] 伊 璞，侯利锋，杜华云，等.新型奥氏体不锈钢高温NaCl 腐蚀行为研究[J].中国腐蚀与防护学报，2022，42(2):288-294.YI P，HOU L F，DU H Y，et al.NaCl Induced Corrosion of Three Austenitic Stainless Steels at High Temperature[J].Journal of Chinese Society for Corrosion and Protection，2022，42(2):288-294.
[2] 邱 萍，许守武，修林冉，等.304 不锈钢螺栓在模拟水下环境中的腐蚀行为研究[J].材料保护，2021，54(5):42-50.QIU P，XU S W，XIU L R，et al.Corrosion Behavior of 304 Stainless Steel Bolt in Simulated Underwater Environment[J].Materials Protection，2021，54(5):42-50.
[3] 牛寅竹，史艳华，杨众魁，等.X80 钢焊接结构海水腐蚀及温度的影响规律[J].腐蚀科学与防护技术，2019，31(5):495-500.NIU Y Z，SHI Y H，YANG Z K，et al.Effect of Temperature On Corrosion of Weld Structures for X80 Steel in Artificial Seawater[J].Corrosion Science and Protection Technology，2019，31(5):495-500.
[4] GOYAL A，POUYA H S，GANJIAN E，et al.A review of corrosion and protection of steel in concrete[J].Arabian Journal for Science and Engineering，2018，43 (10):5 035-5 055.
[5] UJIRO T，SATOH S，STAEHLE R W，et al.Effect of alloying Cu on the corrosion resistance of stainless steels in chloride media [J].Corrosion Science，2001，43(11):2 185-2 200.
[6] XI T，SHAHZAD M B，XU D，et al.Effect of copper addition on mechanical properties，corrosion resistance and antibacterial property of 316L stainless steel[J].Materials Science and Engineering: C，2017，71: 1 079-1 085.
[7] 尹 路，徐大可，杨春光.银、铜复合添加对2205 双相不锈钢耐硫酸盐还原菌腐蚀行为的影响[J].表面技术，2019，48(7): 316-323.YIN L，XU D K，YANG C G.Effect of Cu and Ag on Microbiologically Influenced Corrosion Resistance of 2205 Duplex Stainless Steel in Sulfate Reducing Bacteria[J].Surface Technology，2019，48(7): 316-323.
[8] 顾兴隆，朱四东，蔡琦琦.抗菌金属材料抗菌性能与检测方法评价[J].浙江万里学院学报，2018，31(5):88-91.GU X L，ZHU S D，CAI Q Q.Evaluation on detection methods and antibacterial property of antibacterial metallic materials [J].Journal of Zhejiang Wanli University，2018，31(5): 88-91.
[9] 李 杭，高建新，李运刚.载铜抗菌不锈钢的现状及发展[J].热加工工艺，2020，49(8): 21-25.LI H，GAO J X，LI Y G.Current situation and development of copper - loaded antibacterial stainless steel [J].Hot Working Technology，2020，49(8): 21-25.
[10] 董加胜，陈四红，吕曼祺.抗菌材料发展和现状[J].材料导报，2004(3): 41-43.DONG J S，CEHN S H，LV M Q.History and Current Status of Antibacterial Materials[J].Materials Reports，2004(3): 41-43.
[11] MA Z，LIU R，ZHAO Y，et al.Study on the antibacterial mechanism of Cu-bearing titanium alloy in the view of materials science [J].Materials Technology，2020，35(1):11-20.
[12] LIU L T，CHIN A W H，YU P，et al.Anti-pathogen stainless steel combating COVID-19 [J].Chemical Engineering Journal，2022，433: 133 783.
[13] 张志霞.含铜(氮)抗菌不锈钢的组织与性能研究[D].上海:上海交通大学，2007.ZHANG Z X.Study on microstructure and properties of antibacterial stainless steel containing Cu (N) [D].Shanghai:Shanghai Jiao Tong University，2007.
[14] 倪红卫，但智钢，许伯藩.AISI 304 不锈钢渗铜后的微观组织及抗菌性能[J].材料热处理学报，2005(5):42-45.NI H W，DAN Z G，XU B F.Microstructure and Antibacterial Property of AISI 304 Stainless Steel After Chemical Copperizing Treatment[J].Transactions of Materids and Heat Treatment，2005(5): 42-45.
[15] 孙一唐.金属与合金的化学热处理手册[M].上海:上海科技出版社，1986:350.SUN Y T.Manual for Chemical heat treatment of metals and alloys[M].Shanghai: Shanghai Science and Technology Press，1986:350.
[16] 纪祥娟，朱全心，刘 涛，等.抑菌圈直径测量中的显著性检验[J].计量与测试技术，2017，44(6):45-46.JI X J，ZHU Q X，LIU T，et al.Significance Test of the Inhibition Zone Diameter Measurement [J].Metrology ＆Measurement Technique，2017，44(6):45-46.
[17] 高秋英，贺 三，杨耀辉，等.Q245R 钢在高含Cl-塔河模拟油田水中的腐蚀行为研究[J].材料保护，2021，54(12):59-63.GAO Q Y，HE S，YANG Y H，et al.Study on corrosion behavior of Q245R steel in high Cl-Tahe simulated oilfield water[J].Materials Protection，2021，54(12):59-63.
[18] 王 琳，王晓霞，王 欣，等.冷喷涂铝/银纳米线复合涂层的海洋耐蚀防污性能研究[J].材料保护，2022，55(1):27-33.WANG L，WANG X X，WANG X，et al.Investigation on the Marine Corrosion Resistance and Antifouling Properties of Aluminum/Silver Nanowire Composite Coatings Fabricated via Cold Spraying[J].Materials Protection，2022，55(1):27-33.
[19] 程建国，刘 震，赵士光，等.17-4PH 不锈钢在不同浓度HCl 环境中的电化学腐蚀行为[J].材料保护，2021，54(10):29-35.CHENG J G，LIU Z，ZHAO S G，et al.Electrochemical Corrosion Behaviors of 17-4PH Stainless Steel in Different Concentrations of HCl Solutions[J].Materials Protection，2021，54(10):29-35.
[20] 王 帅，吴 新，张庆国.低温省煤器防腐换热管表面耐蚀性能[J].腐蚀科学与防护技术，2018，30(3):266-272.WANG S，WU X，ZHANG Q G，et al.Corrosion Resistance of Different Tube Coatings for Low-temperature Economizers[J].Corrosion Science and Protection Technology，2021，54(10):29-35.
[21] POTGIETER J H，OLUBAMBI P A，CORNISH L，et al.Influence of nickel additions on the corrosion behaviour of low nitrogen 22%Cr series duplex stainless steels [J].Corrosion Science，2008，50(9): 2 572-2 579.
[22] 赵吉鹏，王 军，刘天增，等.347H 不锈钢电化学腐蚀行为研究[J].兰州理工大学学报，2021，47(6):6-14.ZHAO J P，WANG J，LIU T Z，et al.Study on electrochemical corrosion of 347H stainless steel[J].Journal of Lanzhou University of Technology，2021，47(6):6-14.
[23] 常随成，韩 燕，史东峰，等.含Cr 钢腐蚀性能的研究现状及进展[J].辽宁化工，2014，43(4):455-459.CHANG S C，HAN Y，SHI D F，et al.Research Status and Progress on Corrosion of Cr-Containing Steel[J].Liaoning Chemical Industry，2014，43(4):455-459.
[24] 杨丽华，宋立欣，夏福松.连续油管腐蚀原因分析[J].化工设计通讯，2017，43(12):129.YANG L H，SONG L X，XIA F S，et al.Analysis of Corrosion Cause of Coiled Tubes[J].Chemical Engineering Design Communications，2017，43(12):129.
[25] 闫风洁，李辛庚，姜 波，等.纯铜在碱性土壤中的腐蚀行为[J].腐蚀科学与防护技术，2019，31(2):155-158.YAN F J，LI X G，JIANG B，et al.Corrosion Behavior of Pure Copper in Alkaline Soil[J].Corrosion Science and Protection Technology，2019，31(2):155-158.
[26] DINU M，MOUELE E S M，PARAU A C，et al.Enhancement of the corrosion resistance of 304 stainless steel by Cr-N and Cr (N，O) coatings [J].Coatings，2018，8(4):132.
[27] MOON J，HA H Y，PARK S J，et al.Effect of Mo and Cr additions on the microstructure，mechanical properties and pitting corrosion resistance of austenitic Fe-30Mn-10.5 Al-1.1 C lightweight steels[J].Journal of Alloys and Compounds，2019，775: 1 136-1 146.
/
| 〈 |
|
〉 |
