胡丽玲, 张 豪, 赖 天, 廖钧智, 多树旺 . 氮化物涂层的可控制备、结构特点及其性能研究进展[J]. 材料保护, 2023 , 56(8) : 143 -156 . DOI: 10.16577/j.issn.1001-1560.2023.0198

[1] 万 强.TiSiN 纳米晶复合陶瓷材料合成、结构表征及性能研究[D].武汉:武汉大学，2016.WAN Q.Synthesise，characterization and properties of Ti-SiN nanocomposite ceramic materials [D].Wuhan: Wuhan University，2016.

[2] JIN J，LIU H J，ZHENG D C，et al.Effects of Mo content on the interfacial contact resistance and corrosion properties of CrN coatings on SS316L as bipolar plates in simulated PEMFCs environment [J].International Journal of Hydrogen Energy，2018，43(21): 10 048-10 060.

[3] 王 欣，范其香，王铁钢，等.CrAlN 纳米复合涂层的组织结构及切削性能研究[J].材料保护，2021，54(4):63-68.WANG X，FANG Q X，WANG T G，et al.The Microstructure and Cutting Property of CrAlN Nanocomposite Coating[J].Materials Protection，2021，54(4): 63-68.

[4] GAO B，DU X Y，LI Y H，et al.Effect of deposition temperature on hydrophobic CrN/AlTiN nanolaminate composites deposited by Multi-Arc-Ion Plating [J].Journal of Alloys and Compounds，2019，797: 1-9.

[5] ZHAO Y C，XU F，ZHANG D，et al.Enhanced tribological and corrosion properties of DLC/CrN multilayer films deposited by HPPMS [J].Ceramics International，2022，48(17): 25 569-25 577.

[6] JU H B，ZHOU R，LUAN J，et al.Multilayer Mo2N-Ag/SiNxfilms for demanding applications: morphology，structure and temperature - cycling tribological properties [J].Materials ＆ Design，2022，223: 111128.

[7] ZHOU C，WANG J J，MENG J，et al.Effects of modulation layer thickness on fracture toughness of a TiN/AlN-Ni multilayer film [J].Materials ＆ Design，2022，222: 111097.

[8] LIU D G，RUAN C F，ZHANG P，et al.Structural，interface texture and toughness of TiAlN/CNxmultilayer films[J].Materials Characterization，2021，178: 111301.

[9] CHANG Y Y，YANG Y J，WENG S Y.Effect of interlayer design on the mechanical properties of AlTiCrN and multilayered AlTiCrN/TiSiN hard coating [J].Surface and Coatings Technology，2020，389: 125637.

[10] WANG J，LU H，LI X H，et al.Supermodulus effect by grain-boundary wetting in nanostructured multilayers [J].Journal of Materials Science ＆ Technology，2021，65:202-209.

[11] ZUO B，XU J H，LU G Y，et al.Microstructures，mechanical properties and corrosion resistance of TiN/AlN multilayer films [J].Ceramics International，2022，48(8): 11 629-11 635.

[12] 吴 雁，王 冰，肖礼军，等.Ti-Al-Si-N 多层梯度涂层的微观结构及力学性能研究[J].表面技术，2021，50(2):232-237.WU Y，WANG B，XIAO L J，et al.Research on Microstructure and Mechanical Properties of Ti-Al-Si-N Multilayer Gradient Coating [J].Surface Technology，2021，50(2): 232-237.

[13] VEPREK S，REIPRICH S，LI S Z.Superhard nanocrystalline composite materials: The TiN/Si3N4system [J].Applied Physics Letters，1995，66(20): 2 640.

[14] HE N R，LI H X，JI L，et al.High temperature tribological properties of TiAlSiN coatings produced by hybrid PVD technology [J].Tribology International，2016，98:133-143.

[15] WANG Y F，LI Z X，DU J H，et al.(Ti，Al，Si，C)N nanocomposite coatings synthesized by plasma-enhanced magnetron sputtering [J].Applied Surface Science，2011，258(1): 456-460.

[16] GREENWOOD J A，WILLIAMSON J P.Contact of nominally flat surfaces[C]/ /Proceedings of the royal society of London.Series A.Mathematical and Physical Sciences[S.l.:s.n.]，1966，295: 300-319.

[17] JOHNSON K L.Contact mechanics[M].London:Cambridge University Press，1985.

[18] CHEN X J，DU Y，CHUNG Y W.Commentary on usingH/EandH3/E2as proxies for fracture toughness of hard coatings [J].Thin Solid Films，2019，688: 137265.

[19] BEAKE B D.The influence of the H/E ratio on wear resistance of coating systems-insights from small-scale testing[J].Surface and Coatings Technology，2022，442:128272.

[20] DENG J X，WU F F，LIAN Y S，et al.Erosion wear of CrN，TiN，CrAlN，and TiAlN PVD nitride coatings [J].International Journal of Refractory Metals ＆ Hard Materials，2012，35: 10-16.

[21] ASEMPAH I，XU J H，YU L H，et al.Effect of boron concentration on the mechanical，tribological and corrosion properties of Ta-B-N films by reactive magnetron sputtering[J].Ceramics International，2019，45(15): 19 395-19 403.

[22] HE Y X，WANG X B，GUO T，et al.Effect of interface on oxidation behavior and tribological properties of CrAlN/SiNxmultilayer films [J].Ceramics International，2023，49(1):1 369-1 380.

[23] ZHANG M M，LI Y F，FENG Y P，et al.Studies on different oxidation behaviors of TiAlN on titanium alloy and stainless steel under thermal cycling [J].Corrosion Science，2021，192: 109865.

[24] WANG Q Z，ZHOU F，YAN J W.Evaluating mechanical properties and crack resistance of CrN，CrTiN，CrAlN and CrTiAlN coatings by nanoindentation and scratch tests [J].Surface and Coatings Technology，2016，285: 203-213.

[25] DANG C Q，LI J L，WANG Y，et al.Influence of Ag contents on structure and tribological properties of TiSiN-Ag nanocomposite coatings on Ti-6Al-4V [J].Applied Surface Science，2017，394: 613-624.

[26] CAI X J，GAO Y，CAI F，et al.Effects of multi-layer structure on microstructure，wear and erosion performance of the Cr/CrN films on Ti alloy substrate [J].Applied Surface Science，2019，483: 661-669.

[27] FAGA M G，GAUTIER G，CARTASEGNA F，et al.Al-SiTiN and AlSiCrN multilayer coatings: effects of structure and surface composition on tribological behavior under dry and lubricated conditions [J].Applied Surface Science，2016，365: 218-226.

[28] TELES V C，DE MELLO J D B，DA SILVA J R W M.Abrasive wear of multilayered/gradient CrAlSiN PVD coatings:Effect of interface roughness and of superficial flaws [J].Wear，2017，376-377: 1 691-1 701.

[29] COMAKLI O.Influence of CrN，TiAlN monolayers and TiAlN/CrN multilayer ceramic films on structural，mechanical and tribological behavior of β-type Ti45Nb alloys [J].Ceramics International，2020，46(6): 8 185-8 191.

[30] 黎海旭，唐 鹏，吴正涛，等.TiSiN/AlCrN 纳米多层涂层高温热稳定性及摩擦学特性研究[J].机械工程学报，2018，54(6): 32-40.LI H X，TANG P，WU Z T，et al.High-temperature Thermal Stability and Tribological Property of TiSiN/AlCrN Nano-multilayer Coatings [J].Journal of Mechanical Engineering，2018，54(6): 32-40.

[31] THORNTON J A.High-rate thick film growth [J].Annual Review of Materials Science，1977，7(1): 239-260.

[32] 梁杨梦甜，范其香，王 欣，等.CrAlN 纳米梯度涂层的组织结构与性能研究[J].表面技术，2021，50(5):348-355.LIANG Y M T，FAN Q X，WANG X，et al.Study on Microstructure and Properties of CrAlN Nano-Gradient Coatings [J].Surface Technology，2021，50(5): 348-355.

[33] IRAM S，CAI F，WANG J M，et al.Mechanical and wear properties of AlCrN/AlCrVN multilayer coatings with different numbers of bilayers [J].Rare Metal Materials and Engineering，2022，51(1): 74-82.

[34] MEI F S，ZHANG Z J，YANG Y，et al.Microstructure，mechanical，tribological，and oxidizing properties of AlCrSiN/AlCrVN/AlCrNbN multilayer coatings with different modulated thicknesses [J].Ceramics International，2022，48(22): 32 973-32 985.

[35] TIAN J L，HU C，CHEN L，et al.Structure，mechanical and thermal properties of Y - doped CrAlN coatings [J].Tansactions of Nonferrous Metals Society of China，2021，31: 2 740-2 749.

[36] MANAWI Y M，IHSANULLAH，SAMARA A，et al.A Review of Carbon Nanomaterials Synthesis via the Chemical Vapor Deposition (CVD) Method [J].Materials，2018，11(5): 822.

[37] 黎宪宽，陈 力，蔡宏中，等.化学气相沉积技术及在难熔金属材料中的应用[J].稀有金属材料与工程，2010，39(21): 438-443.LI X K，CHEN L，CAI H Z，et al.Development of Chemical Vapor Deposition and Refractory Metal Materials [J].Rare Metal Materials and Engineering，2010，39(21):438-443.

[38] KAINZ C，SCHALK N，TKADLETZ M，et al.Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings [J].Surface and Coatings Technology，2019，270:311-319.

[39] SONG S H，MIN B K，HONG M H，et al.Application of a Novel CVD TiN Coating on a Biomedical Co-Cr Alloy: An Evaluation of Coating Layer and Substrate Characteristics[J].Materials，2020，13(5): 1145.

[40] QIU L C，DU Y，WANG S Q，et al.Mechanical properties and oxidation resistance of chemically vapor deposited TiSiN nanocomposite coating with thermodynamically designed compositions [J].International Journal of Refractory Metals ＆ Hard Materials，2019，80: 30-39.

[41] GUHA S，DAS S，BANDYOPADHYAY A，et al.Investigation of structural network and mechanical properties of Titanium silicon nitride (TiSiN) thin films [J].Journal of Alloys and Compounds，2017，731: 347-353.

[42] SCHALK N，TKADLETZ M，MITTERER C.Hard coatings for cutting applications: Physical vs.chemical vapor deposition and future challenges for the coatings community [J].Surface and Coatings Technology，2022，429: 127 949.

[43] KIM K H，PARK B H.Mechanical Properties and Oxidation Behavior of Ti-Si-N Films Prepared by Plasma-Assisted CVD [J].Chemical Vapor Deposition，1999，5 (6):275-279.

[44] PARK I W，KIM K H.Coating materials of TiN，Ti-Al-N，and Ti-Si-N by plasma-enhanced chemical vapor deposition for mechanical applications [J].Journal of Materials Processing Technology，2002，130-131: 254-259.

[45] SUI X D，LIU J Y，ZHANG S T，et al.Microstructure，mechanical and tribological characterization of CrN/DLC/Cr-DLC multilayer coating with improved adhesive wear resistance [J].Applied Surface Science，2018，439: 24-32.

[46] GE W Y，CHANG Z，SIDDIQUE A，et al.Large-area fabrication of TiN thin films with photothermal effect via PECVD [J].Ceramics International，2020，46 (6):7 355-7 361.

[47] KILICASLAN A，ZABEIDA O，BOUSSER E，et al.Hard titanium nitride coating deposition inside narrow tubes using pulsed DC PECVD processes [J].Surface and Coatings Technology，2019，377: 124894.

[48] FANG T H，JIAN S R，CHUN D S.Nanomechanical properties of TiC，TiN and TiCN thin films using scanning probe microscopy and nanoindentation [J].Applied Surface Science，2004，228(1-4): 365-372.

[49] NEKOUEE K A，ELMKHAH H.Characterization of TiN Coatings Deposited on H11 Tool Steel by PECVD Method[J].Protection of Metals and Physical Chemistry of Surfaces，2018，54(4): 662-667.

[50] HUANG M D，LIN G Q，ZHAO Y H，et al.Macro-particle reduction mechanism in biased arc ion plating of TiN [J].Surface and Coatings Technology，2003，176 ( 1):109-114.

[51] WANG D，LIN S S，LIU L Y，et al.Effect of pulsed electromagnetic frequency on the microstructure，wear and solid erosion resistance of CrAlN coatings deposited by arc ion plating [J].Journal of Central South University，2022，29:3 065-3 076.

[52] ZHANG C H，LU X C，WANG H，et al.Microstructure，mechanical properties，and oxidation resistance of nanocomposite Ti - Si - N coatings [J].Applied Surface Science，2005，252(18): 6 141-6 153.

[53] 付志强，苗志玲，岳 文，等.脉冲偏压占空比对电弧离子镀TiAlN 涂层的影响[J].稀有金属材料与工程，2018，47(11): 3 482-3 486.FU Z Q，MIAO Z L，YUE W，et al.Influence of Duty Ratio of Pulsed Bias on TiAlN Coatings Deposited by Arc Ion Plating [J].Rare Metal Materials and Engineering，2018，47(11): 3 482-3 486.

[54] 陈淑年，廖 斌，陈 琳，等.基于磁过滤技术TiAlCN/TiAlN/TiAl 复合体系腐蚀及摩擦学性能[J].物理学报，2020，69(10): 107202.CHEN S N，LIAO B，CHEN L，et al.Corrosion and tribological properties of TiAlCN/TiAlN/TiAl composite system deposited by magneticfliter cathode vacuum arctechnique[J].Acta Phys Sin，2020，69(10): 107202.

[55] 张志强，廖 斌，欧伊翔，等.磁过滤阴极真空弧技术制备厚且韧TiN 涂层[J].物理学报，2020，69(10):108103.ZHANG Z Q，LIAO B，OU Y X，et al.Thick yet tough TiN coatings deposites by filter cathode vacuun arc technology[J].Acta Phys.Sin.2020，69(10): 108103.

[56] LUO J，OU Y X，ZHANG Z Q，et al.Low friction coefficient of superhard nc-TiC/a-C:H nanocomposite coatings deposited by filtered cathodic vacuum arc [J].Materials Research Express，2019，6(9): 096418.

[57] LIN J L，ZHANG N Y，SPROUL W D，et al.A comparison of the oxidation behavior of CrN films deposited using continuous dc，pulsed dc and modulated pulsed power magnetron sputtering [J].Surface and Coatings Technology，2012，206(14): 3 283-3 290.

[58] 杨 凯.反应磁控溅射法制备TiN 薄膜的研究[D].南京: 东南大学，2006.YANG K.The Research on TiN films Deposited by Magnetron Sputtering [D].Nanjing: Southeast University，2006.

[59] Al-RJOUB A，CAVALERIO A，FERNANDES F.Influence of Ag alloying on the morphology，structure，mechanical properties，thermal stability and oxidation resistance of multilayered TiSiN/Ti(Ag)N films [J].Materials and Design，2020，192: 108703.

[60] 王振玉，徐 胜，张 栋，等.N2流量对HIPIMS 制备TiSiN 涂层结构和力学性能的影响[J].金属学报，2014，50(5): 540-546.WANG Z Y，XU S，ZHANG D，et al.Infuence of N2flow rate on structures and mechanical properties of TiSiN coatings prepared by HIPIMS method [J].Acta Metallurgical Sinica，2014，50(5): 540-546.

[61] 王启民，张小波，张世宏，等.高功率脉冲磁控溅射技术沉积硬质涂层研究进展[J].广东工业大学学报，2013，30(4): 113-133.WANG Q M，ZHANG X B，ZHANG S H，et al.High Power Impulse Magnetron Sputtering for Deposition of Hard Coatings[J].Journal of Guangdong University of Technology，2013，30(4): 113-133.

[62] SARAKINOS K，ALAMI J，KONSTANTINIDIS S.High power pulsed magnetron sputtering: A review on scientific and engineering state of the art [J].Surface and Coatings Technology，2010，204(11): 1 661-1 684.

[63] ODIVANOVA A N，PODKOVYROV V G，SOCHUGOV N S，et al.Study of the plasma parameters in a high-current pulsed magnetron sputtering system [J].Plasma Physics Reports，2011，37: 239-243.

[64] XU Y，LI G，XIA Y.Synthesis and characterization of superhard AlCrTiVZr high-entropy alloy nitride films deposited by HiPIMS [J].Applied Surface Science，2020，523:146529.

[65] 周晟昊.电弧离子镀氮化物涂层的力学行为和变形机制[D].广州:华南理工大学，2021.ZHOU S H.Mechanical behaviors and deformation mechanisms of arc ion plated nitride coatings [D].Guangzhou:South China University of Technology，2021.

[66] CHRISTIE D J.Target material pathways model for high power pulsed magnetron sputtering [J].Journal of Vacuum Science ＆ Technology A，2005，2(3): 330-335.

[67] 朱宇杰，马景灵，王广欣，等.HIPIMS 技术制备CrN 及CrAlN 涂层的性能[J].材料热处理学报，2019，40(4):127-135.ZHU Y J，MA J L，WANG G X，et al.Properties of CrN and CrAlN coatings prepared by HIPIMS technology [J].Transactions of Materials and Heat Treatment，2019，40(4): 127-135.

[68] 王铁钢，李柏松，张娇娇，等.沉积温度对高功率脉冲磁控溅射AlCrSiN 涂层结构和性能的影响[J].稀有金属材料与工程，2018，47(8): 2 578-2 583.WANG T G，LI B S，ZHANG J J，et al.Infuence of Deposition Temperature on Microstructures and Mechnical Properties of the Al-Cr-Si-N Coating Deposited by HiPIMS Technique [J].Rare Metal Materials and Engineering，2018，47(8): 2 578-2 583.

[69] LIN J L，SPROUL W D，MOORE J J，et al.Recent advances in modulated pulsed power magnetron sputtering for surface engineering [J].JOM，2011，63(6): 48-58.

[70] LIN J，MOORE J J，SPROUL W D，et al.Ion energy and mass distributions of the plasma during modulated pulse power magnetron sputtering [J].Surface and Coatings Technology，2009，203(24): 3 676-3 685.

[71] 吴忠振，朱宗涛，巩春志，等.高功率脉冲磁控溅射技术的发展与研究[J].真空，2009，46(3): 18-22.WU Z Z，ZHU Z T，GONG C Z，et al.Development of high-power pulse magnetron sputtering technology [J].Vacuum，2009，46(3): 18-22.

[72] CHANG C L，HUANG C H，LIN C Y，et al.Mechanical properties of amorphous and crystalline CrN/CrAlSiN multilayer coating fabricated using HPPMS [J].Surfaces and Interfaces，2022，31: 102064.

[73] CAVALEIRO D，CARVALHO S，CAVALEIRO A，et al.TiSiN(Ag) films deposited by HiPIMS working in DOMS mode: Effect of Ag content on structure，mechanical properties and thermal stability [J].Applied Surface Science，2019，478: 426-434.

[74] 欧伊翔，王浩琦，庞 盼，等.深振荡磁控溅射复合沉积CrN/TiN 超晶格涂层的摩擦学性能[J].稀有金属材料与工程，2020，49(7): 2 476-2 479.OU Y X，WANG H Q，PANG P，et al.Trobological Properties of CrN/TiN Superlattice Coatings Deposited by Deep Oscillation Magnetron Sputtering [J].Rare Metal Materials and Engineering，2020，49(7): 2 476-2 479.

[75] CHENG Y H，BROWNE T，HECKERMAN B，et al.Mechanical and tribological properties of nanocomposite TiSiN coatings [J].Surface and Coatings Technology，2010，204(14): 2 123-2 129.

[76] ZHANG S H，WANG L，WANG Q M，et al.A superhard CrAlSiN superlattice coating deposited by multi-arc ion plating: I.Microstructure and mechanical properties [J].Surface and Coatings Technology，2013，214: 160-167.

[77] XU Y X，CHEN L，PEI F，et al.Effect of the modulation ratio on the interface structure of TiAlN/TiN and TiAlN/ZrN multilayers: First-principles and experimental investigations[J].Acta Materialia，2017，130: 281-288.

[78] PEI F，LIU H J，CHEN L，et al.Improved properties of TiAlN coating by combined Si-Addition and multilayer architecture [J].Journal of Alloys and Compounds，2019，790: 909-916.

[79] TANG J F，HUANG C H，LIN C Y，et al.Effects of Substrate Rotation Speed on Structure and Adhesion Properties of CrN/CrAlSiN Multilayer Coatings Prepared Using High-Power Impulse Magnetron Sputtering [J].Coatings，2020，10(8): 742.

[80] MA H R，MIAO Q，ZHANG G H，et al.The influence of multilayer structure on mechanical behavior of TiN/TiAlSiN multilayer coating [J].Ceramics International，2021，47(9): 12 583-12 591.

[81] PENG Y H，CHEN L，XU Y X，et al.Interface enhanced mechanical and thermal properties of TiSiN/TiAlN multilayers [J].Journal of Alloys and Compounds，2021，861:158571.

[82] AL-RJOUB A，CAVALEIRO A，FERNANDES F.Structure，Morphology，Thermal Stability and Oxidation Resistance of Multilayered TiSiN/VN Films: Influence of TiSiNLayer Thickness [J].Journal of Materials Engineering and Performance，ASM International，2021，30: 3 934-3 941.

[83] VEPREK S，HAUSSMANN M，REIPRICH S，et al.Novel thermodynamically stable and oxidation resistant superhard coating materials [J].Surface and Coatings Technology，1996，86-87(1): 394-401.

[84] VOEVODIN A A，MURATORE C，AOUADI S M.Hard Coatings with High Temperature Adaptive Lubrication and Contact Thermal Management: Review [J].Surface and Coatings Technology，2014，257: 247-265.

[85] AOUADI S M，GAO H，MARTINI A，et al.Lubricious Oxide Coatings for Extreme Temperature Applications: A Review [J].Surface and Coatings Technology，2014，257:266-277.

[86] HOVSEPIAN P E，MUNZ W D.Recent progress in largescale production of nanoscale multilayer/superlattice hard coatings [J].Vacuum，2003，69(1-3): 27-36.

[87] MAYRHOFER P H，HOVSEPIAN P E，MITTERER C，et al.Calorimetric Evidence for Frictional Self-adaptation of TiAlN/VN Superlattice Coatings [J].Surface and Coatings Technology，2004，177-178: 341-347.

[88] OUYANG J H，MURAKAMI T，SASAKI S.High-Temperature Tribological Properties of a Cathodic Arc Ion-Plated(V，Ti)N Coating [J].Wear，2007，263(7-12): 1 347-1 353.

[89] FERNANDES F，AL-RJOUB A，CAVALEIRO D，et al.Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering [J].Coatings，2020，10(12): 1191.

[90] DONOHUE L A，SMITH I J，MUNZ W D，et al.Microstructure and oxidation-resistance of Ti1-x-y-zAlxCryYzN layers grown by combined steered-arc/unbalanced-magnetronsputter deposition [J].Surface and Coatings Technology，1997，94-95: 226-231.

[91] XU Y F，SHUM P W，ZHOU Z F，et al.Effect of high-energy carbon ion implantation on Ti-Al-Si-N coatings by metal vapour vacuum arc [J].Surface and Coatings Technology，2010，204(12-13): 1 914-1 918.

[92] 刘孟奇，郭惠霞，王永欣，等.CrN/CrAlSiN 涂层海水环境下的摩擦学性能[J].中国表面工程，2017，30(2):63-70.LIU M Q，GUO H X，WANG Y X，et al.Tribological Behaviors of CrN/CrAlSiN Coatings in Seawater [J].China Surface Engineering，2017，30(2): 63-70.

[93] CHANG C C，DUH J G.Duplex coating technique to improve the adhesion and tribological properties of CrAlSiN nanocomposite coating [J].Surface and Coatings Technology，2017，326: 375-381.

[94] XIE W Z，CHEN Y X，CHEN D Z，et al.Low-pressure gas nitriding of AISI 304 austenitic stainless steel: reducing the precipitation of chromium nitrides [J].Materials Research Express，2020，7(6): 066406.

[95] LU S J，ZHAO X B，WANG S K，et al.Performance enhancement by plasma nitriding at low gas pressure for 304 austenitic stainless steel [J].Vacuum，2017，145:334-339.

[96] SHEN H Y，WANG L，SUN J C.Characteristics and properties of CrN compound layer produced by plasma nitriding of Cr-electroplated of AISI 304 stainless steel [J].Surface and Coatings Technology，2020，385: 125450.

[97] 王振玉.TiSiN 纳米复合硬质涂层的制备与物性研究[D].宁波:宁波大学，2014.WANG Z Y.Preparation and properties of TiSiN nanocomposite hard coatings [D].Ningbo: Ningbo University，2014.

[98] LI G，ZHANG L，CAI F，et al.Characterization and corrosion behaviors of TiN/TiAlN multilayer coatings by ion source enhanced hybrid arc ion plating [J].Surface and Coatings Technology，2019，366: 355-365.

[99] 李海涛，孙鹏飞，黄永德，等.镁合金表面纳米TiSiN 复合薄膜的制备及其结构和耐蚀耐磨性能分析[J].焊接学报，2020，41(11): 69-75.LI H T，SUN P F，HUANG Y D，et al.Preparation and characterization of structure and corrosion resistance and wear resistance of nano TiSiN films deposited on Mg alloys[J].Transactions of the China Welding Institution，2020，41(11): 69-75.