为了研究长周期涂油封存防锈方案的防锈性能,分别采用3款防锈油(薄层防锈油SF/Y216、润滑油型防锈油SF/Y246B、溶剂稀释型防锈油SF/Y1030)进行涂油防锈后,再采用气相防锈塑料薄膜与干燥剂(硅胶干燥剂、速效干燥剂)进行组合防锈,通过3 a百叶箱试验分别对3款防锈油的组合封存防锈方案进行防锈性能研究。结果表明: 3款防锈油的组合封存防锈方案的防锈性能优异,均可以满足3 a长周期封存防锈的要求,并且薄层防锈油SF/Y216的油膜最薄、涂油量最少。
In order to study the anti-rust performance of the long cycle oil sealing rust prevention scheme, three anti-rust oils (thin layer anti-rust oil SF/Y216, lubricating oil type anti-rust oil SF/Y246B, and solvent-diluting anti-rust oil SF/Y1030 ) were used separately for oil coating and rust prevention. Then, the vapor phase anti-rust plastic film and desiccant (silica gel desiccant, quick acting desiccant) were used for combined rust prevention, and the anti-rust performance of the combined storage rust prevention scheme of three anti-rust oils was studied through 3 a of shed storage exposure test. Results showed that the combined storage rust prevention scheme of the three anti-rust oils had excellent anti-rust performance, which all met the requirements of long-term storage rust prevention for 3 a, and the thin layer anti-rust oil SF/Y216 had the thinnest oil film and the least amount of oil applied.
[1] 崔中雨, 葛 峰, 王 昕. 几种苛刻海洋大气环境下的海工材料腐蚀机制[J].中国腐蚀与防护学报,2022,42(3):403-409.
CUI Z Y, GE F, WANG X. Corrosion Mechanism of Materials in Three Typical Harsh Marine Atmospheric Environments[J]. Journal of Chinese Society for Corrosion and Protection,2022,42(3):403-409.
[2] 王振尧,陈鸿川,于国才.碳钢在沈阳地区的大气腐蚀[J].全面腐蚀控制,1998(1):6-8.
WANG Z Y, CHEN H C, YU G C. Atmospheric corrosion of carbon steel in Shenyang[J]. Total Corrosion Control,1998(1):6-8.
[3] 朱晓明,周学杰,王 玮,等. 石油化工业钢结构的大气腐蚀与防护措施[J].材料保护,2013,46(3):67-69.
ZHU X M, ZHOU X J, WANG W, et al. Atmospheric corrosion and protective measures of steel structures in petrochemical industry[J]. Materials Protection,2013,46(3):67-69.
[4] 王振尧,于国才,韩 薇. 我国自然环境大气腐蚀性调查[J].腐蚀与防护,2003(8):323-326.
WANG Z Y, YU G C, HAN W. A survey of the atmospheric corrosiveness of natural environments in China[J]. Corrosion & Protection,2003(8):323-326.
[5] GB/T 5048-2017, 防潮包装[S].
GB/T 5048-2017,Moisture-proof packaging[S].
[6] GB/T 4879-2016, 防锈包装[S].
GB/T 4879-2016,Rustproof packaging[S].
[7] GB/T 14188-2008, 气相防锈包装材料选用通则[S].
GB/T 14188-2008,General rules for selection and using of packaging materials with volatile corrosion inhibitor[S].
[8] 张康夫,黄本元,王余高, 等. 暂时防锈手册[M].北京: 化学工业出版社,2011: 395-410.
ZHANG K F, HUANG B Y, WANG Y G. Handbook of temporary rust prevention[M]. Beijing: Chemical Industry Press, 2011: 395-410.
[9] 姚品娟,魏胜利,薛 涛,等. 金属零件在加工过程中的临时防护[J].材料保护,2021,54(11): 183-186.
YAO P J, WEI S L, XUE T, et al. Temporary Protection of Metal Parts in Manufacturing Process[J]. Materials Protection,2021,54(11) : 183-186.
[10] 吴景浪.再制造异形件防锈涂油的保护[J].化学工程与装备,2020(5):184-185.
WU J L. Anti-rust oil protection for remanufactured profiled parts[J].Chemical Engineering & Equipment,2020(5):184-185.
[11] 包胜军,韩喜龙,黄海祥,等. 防锈油与气相防锈材料防腐性能研究:2017防腐蚀涂料年会论文集[C]. 北京:中国化工学会,2017:55-57.
BAO S J, HAN X L, HUANG H X, et al. Research on anticorrosive properties of anti-rust oil and gas phase rust prevention material:Proceedings of the 2017 Anti-Corrosion Coatings Annual Conference[C]. Beijing: Chemical Industry Society of China,2017:55-57.
[12] 唐艳秋,张建伟,王福成. 防锈防护组合技术在装备器材防锈封存中的应用[J]. 包装工程,2014,35(3): 117-122.
TANG Y Q, ZHANG J W, WANG F C. Application of the Rust Protection Combination Technology in the Equipment Preservation[J]. Packaging Engineering, 2014, 35(3): 117-122.
[13] GB/T 5619-1985, 防锈材料百叶箱试验方法[S].
GB/T 5619-1985,Shed storage exposure test—Testing method for rust-proof material[S].
[14] 何贤培. 干燥剂吸湿率测试方法的探讨[J]. 广东化工,2019,46(9): 85-86.
HE X P. Discussion on measurement method of moisture absorption rate of desiccant[J].Guangdong Chemical Industry,2019,46(9): 85-86.
