风沙试验相似准则及其应用研究

郝贠洪, 冯 韬, 刘艳晨, 高 峰, 胡 臻

doi:10.16577/j.issn.1001-1560.2022.0194

材料保护 >

2022 , Vol. 55 >Issue 7: 137 - 143

DOI: https://doi.org/10.16577/j.issn.1001-1560.2022.0194

试验研究

风沙试验相似准则及其应用研究

展开

1. 内蒙古工业大学 a. 土木工程学院，b. 内蒙古自治区土木工程结构与力学重点实验室，内蒙古呼和浩特 010051；2. 内蒙古自治区建筑检测鉴定与安全评估工程技术研究中心，内蒙古呼和浩特 010051

冯韬(1989-)，硕士研究生，主要研究方向为区域特殊环境下工程材料及结构损伤及防护关键技术研究，电话：13074741251，E - mail: 158881564@qq.com

收稿日期: 2022-01-20

修回日期: 2022-02-28

录用日期: 2022-03-21

网络出版日期: 2023-12-15

基金资助

国家自然科学基金项目(11162011，51468049，11662012，11862022)；内蒙古自治区自然科学基金面上项目(2018MS05047)；开放基金项目(FKLTFM1907)；内蒙古高校青年科技英才支持计划(NJYT - 17 - A09)资助

收起

Similarity Criterion of Wind Sand Test and Its Application Research

Expand

1a. School of Civil Engineering, 1b. The Inner Mongolia Key Laboratory of Civil Engineering Structure and Mechanics, Inner Mongolia University of Technology, Hohhot 010051, China;2. The Inner Mongolia Autonomous Region Construction Inspection and Appraisal and Safety Assessment Engineering Technology Research Center, Hohhot 010051, China

Received date: 2022-01-20

Revised date: 2022-02-28

Accepted date: 2022-03-21

Online published: 2023-12-15

Fold

摘要

在变形磨损理论及相似理论的基础上，对实验室模拟工况与实际工况中风沙冲蚀现象的各项影响因素的相似关系进行分析，提出风沙试验相似准则。为保证工程材料在实际风沙环境及实验室模拟风沙环境中冲蚀损伤的相互转换，该准则对实际工况中和实验室模拟工况中风沙环境各项参数的数值关系进行了限制，并通过调整实验室模拟工况中与实际工况中沙尘浓度及冲蚀速度的比例关系，控制试验速度，达到加速试验的目的。利用该准则设计实验室模拟风沙试验中各项参数的取值，通过实验室模拟风沙试验，预测工程材料在内蒙古中西部实际风沙环境下的损伤程度。风沙试验相似准则为利用模拟试验的方法评估工程材料在风沙环境下的冲蚀损伤提供了理论基础和参数选取的依据。

关键词： 风沙环境; 工程材料; 冲蚀损伤; 相似准则

本文引用格式

郝贠洪, 冯韬, 刘艳晨, 高峰, 胡臻 . 风沙试验相似准则及其应用研究[J]. 材料保护, 2022 , 55(7) : 137 -143 . DOI: 10.16577/j.issn.1001-1560.2022.0194

Abstract

Based on the deformation theory, wear theory and similarity theory, the similarity relations of the various factors influencing the sand erosion phenomenon between in laboratory simulation working condition and in actual working condition were analyzed, and the similarity criterion of the wind sand test was proposed. In order to ensure a mutual conversion between the erosion damages of the engineering materials in the actual wind and sand environment and that in the laboratory simulation environment, this criterion restricted the numerical relations of the various parameters of the wind and sand environment between in actual and laboratory simulation working conditions. By adjusting the proportional relations of the sand - dust concentrations as well as the erosion speeds between in laboratory simulation and actual working conditions, the test speed was controlled and accelerated. Based on this criterion, the values of various parameters in the laboratory simulation wind and sand test could be designed, and the damage degree of engineering materials in the actual wind and sand environment in central and western Inner Mongolia could be predicted through the test mentioned above. The wind and sand test similarity criterion provided a theoretical basis and a basis for parameter selection for evaluating the erosion damage of engineering materials in a wind and sand environment by means of a simulation test.

Key words： wind and sand environment; engineering materials; erosion damage; similarity criterion

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract