Email Alert  RSS
综述

Ti(C,N)基金属陶瓷腐蚀与磨损行为的研究进展

展开
  • (西华大学材料科学与工程学院,四川 成都 610039)
万维财(1986-),副教授,博士,研究方向为新型刀具(硬质)材料与涂层、金属-陶瓷复合材料,电话:13989457747,E-mail:wj927vick@126.com

收稿日期: 2022-04-22

  修回日期: 2022-06-08

  录用日期: 2022-07-27

  网络出版日期: 2023-12-23

基金资助

国家自然科学基金(51901195);教育部春晖计划合作科研项目四川省教育厅重点项目(Z2017069);四川省科技计划项目(2020YFG0175)资助

Research Progress of Corrosion and Wear Behavior of Ti (C,N) - Based Cermets

Expand
  • (School of Materials Science and Engineering,Xihua University,Chengdu 610039,China)

Received date: 2022-04-22

  Revised date: 2022-06-08

  Accepted date: 2022-07-27

  Online published: 2023-12-23

摘要

Ti(C,N)基金属陶瓷因具有优异的高温硬度和耐磨性、低摩擦系数、良好的热稳定性和化学稳定性,而被广泛应用在高温耐磨部件、高温涂层、高速切削刀具等领域,但在恶劣的工况环境下Ti(C,N)基金属陶瓷材料易发生腐蚀与磨损,造成零件的失效。阐述了金属陶瓷腐蚀磨损的基本概念,综述了碳化物添加剂、粘结相成分对Ti(C,N)基金属陶瓷的耐腐蚀性能以及耐磨损性能的影响以及Ti(C,N)基金属陶瓷在极端条件下的腐蚀与磨损协同作用,并展望了金属陶瓷腐蚀与磨损行为的研究发展方向。

本文引用格式

秦运, 王宗元, 王杰, 彭卓豪, 季思源, 万维财 . Ti(C,N)基金属陶瓷腐蚀与磨损行为的研究进展[J]. 材料保护, 2022 , 55(10) : 162 -170 . DOI: 10.16577/j.issn.1001-1560.2022.0292

Abstract

Ti(C,N)-based cermets are widely used in high-temperature and wear-resistant parts,high-temperature coatings and high-speed cutting tools due to their excellent high-temperature hardness and wear resistance,low friction coefficient and good thermal and chemical stability.However,Ti(C,N)-based cermets are prone to corrosion and wear under some harsh service conditions,which can result in the failure of parts.In this paper,the basic concept of corrosion wear of cermet was expounded,and the effects of carbide additives and binder phase composition on the corrosion and wear resistance of Ti(C,N)-based cermets as well as the synergistic effect of corrosion and wear of Ti(C,N)-based cermets under extreme conditions were reviewed.In addition,the development direction of the research on corrosion and wear behavior of cermets were prospected.
文章导航

/