无机粘结固体润滑膜的研究进展

乔红斌, 张大伟, 田雪梅, 金玲

doi:10.16577/j.issn.1001-1560.2022.0022

材料保护 >

2022 , Vol. 55 >Issue 1: 170 - 177

DOI: https://doi.org/10.16577/j.issn.1001-1560.2022.0022

综述

无机粘结固体润滑膜的研究进展

展开

1. School of Chemistry and Chemical Engineering, Anhui University of Technology, Ma’anshan 243002, China;2. Ma’anshan Industrial Technology Research Institute, Anhui University of Technology, Ma’anshan 243002, China

乔红斌( 1973-)，博士，教授，主要从事固体润滑与高分子材料研究，电话: 13053209892，E - mail: qiaohb@ahut.edu.cn

收稿日期: 2021-07-23

修回日期: 2021-09-22

录用日期: 2021-10-20

网络出版日期: 2023-12-24

基金资助

国家自然科学基金项目(51474003) 资助

收起

Research Progress of Inorganic Bonded Solid Lubricant film

Expand

1. 安徽工业大学化学与化工学院； 2. 马鞍山市安工大工业技术研究院高分子与固体润滑研究所

Received date: 2021-07-23

Revised date: 2021-09-22

Accepted date: 2021-10-20

Online published: 2023-12-24

Fold

摘要

无机粘结固体润滑膜能显著降低摩擦系数，降低高温磨损并提高传动效率。剖析了硅酸盐、硼酸盐、磷酸盐3类无机粘结剂的结构特点与综合性能，重点结合无缝钢管热轧分析了磷酸盐粘结固体润滑膜的研究进展，再进一步对比分析了从层状材料、氟化物、软金属和氧化物、无机含氧酸盐到自修复润滑添加剂等方面的减摩与自修复作用机理；最后展望了无机粘结固体润滑膜的发展方向。

关键词： 固体润滑膜; 磷酸盐; 高温; 减摩

本文引用格式

乔红斌, 张大伟, 田雪梅, 金玲 . 无机粘结固体润滑膜的研究进展[J]. 材料保护, 2022 , 55(1) : 170 -177 . DOI: 10.16577/j.issn.1001-1560.2022.0022

Abstract

Inorganic adhesive solid lubricant film could significantly reduce both the friction coefficient and the high temperature wear, then improve the transmission efficiency. In this paper, the structural characteristics and comprehensive properties of three types of inorganic binders of silicate, borate and phosphate were analyzed firstly, and then the research progress of phosphate bonded solid lubricant film for hot rolled seamless steel pipe was emphatically discussed. After that, the mechanisms of anti - friction and self - repairing of layered materials, fluorides, soft metals and oxides, inorganic oxygenates and self - healing lubricating additives, were further compared and analyzed. Finally, the development direction of inorganic bonded solid lubricant film was prospected.

Key words： solid lubricant film; phosphate; high temperature; anti - friction

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract