溶胶-凝胶法制备陶瓷涂层的研究现状

刘雨薇; 农智升

doi:10.16577/j.issn.1001-1560.2023.0121

材料保护 >

2023 , Vol. 56 >Issue 5: 173 - 179

DOI: https://doi.org/10.16577/j.issn.1001-1560.2023.0121

综述

溶胶-凝胶法制备陶瓷涂层的研究现状

刘雨薇 ,
农智升

展开

沈阳航空航天大学材料科学与工程学院,辽宁沈阳 110136

农智升(1986-),博士,副教授,主要研究方向为多组元高性能合金及涂层材料,电话:15734002593,E-mail:nzsfir@126.com

收稿日期: 2022-11-29

修回日期: 2022-12-19

录用日期: 2023-01-14

网络出版日期: 2023-07-14

基金资助

辽宁省“兴辽英才计划”项目(XLYC2007075)资助

收起

Research Status of Ceramic Coatings Prepared by Sol-Gel Method

LIU Yu-wei ,
NONG Zhi-sheng

Expand

School of Materials Science and Engineering, Shenyang Aerospace University, Shenyang 110136, China

Received date: 2022-11-29

Revised date: 2022-12-19

Accepted date: 2023-01-14

Online published: 2023-07-14

Fold

摘要

陶瓷涂层具有硬度高、耐磨耐蚀性能优异等优点而成为目前研究的热点,溶胶-凝胶技术是制备陶瓷涂层成熟简便的方法之一。综述了国内外采用溶胶-凝胶技术制备陶瓷涂层的体系设计、涂层的物化性能等方面的研究成果,对比分析了现阶段几种陶瓷涂层存在的问题,并对其延伸技术和发展前景进行了总结和展望,可为今后设计制备性能优良和性价比高的陶瓷涂层提供一定的参考。

关键词： 溶胶-凝胶法; 陶瓷涂层; 制备技术; 物化性能; 研究进展

本文引用格式

刘雨薇 , 农智升 . 溶胶-凝胶法制备陶瓷涂层的研究现状[J]. 材料保护, 2023 , 56(5) : 173 -179 . DOI: 10.16577/j.issn.1001-1560.2023.0121

Abstract

Ceramic coatings have excellent properties of high hardness, outstanding wear resistance, corrosion resistance and so on, which make them become the hot spot of research at present. Sol-gel technology is one of the mature and simple methods to prepare ceramic coatings. In this paper, the research achievements in system design and physical and chemical properties of ceramic coatings prepared by sol-gel technology at home and abroad were reviewed. A comparative analysis was conducted on the existing problems of several ceramic coatings at present, and their extension technologies and development prospects were summarized and prospected, which would provide a certain reference for the design and preparation of ceramic coatings with excellent performance and high cost-effectiveness in the future.

Key words： sol-gel method; ceramic coatings; preparation technology; physical and chemical properties; research progress

参考文献

[1] 赵运才, 张新宇, 孟成. 热喷涂金属陶瓷涂层后处理技术的研究进展[J]. 表面技术, 2021, 50(7): 138-148.
ZHAO Y C, ZHANG X Y, MENG C. Research progress of post-treatment technology of cermet coatings by thermal spraying[J]. Surface Technology, 2021, 50(7): 138-148.
[2] IDUMAH C I, OBELE C M, OBUMNEME E E, et al. Recently Emerging Nanotechnological Advancements in Polymer Nanocomposite Coatings for Anti-corrosion, Anti-fouling and Self-healing[J]. Journal of Surfaces and Interfaces of Materials, 2020, 21: 100 734.
[3] 李新星, 王红侠, 于仁红, 等. 不同条件下溶胶-凝胶法合成氧化铝形貌的研究[J].材料导报, 2014, 28(22): 80-84.
LI X X, WANG H X, YU R H, et al. Study on the morphology of alumina synthesized by the sol-gel method under different conditions[J]. Material Guide, 2014, 28(22): 80-84.
[4] GKB A, AS B, DS C, et al. Oxime-modified aluminum (III) isopropoxide: A promising sol-gel precursor coating to improve mechanical strength of an aluminum alloy[J]. Materials Today: Proceedings, 2021, 46: 10 600-10 603.
[5] 刘富, 相珺, 张越, 等. 溶胶凝胶法制备304钢表面陶瓷涂层的耐蚀性研究[J].表面技术, 2017, 46(12): 233-237.
LIU F, XIANG J, ZHANG Y, et al. Study on corrosion resistance of ceramic coating on 304 Steel surface prepared by sol-gel method[J]. Surface Technology, 2017, 46(12): 233-237.
[6] GRISHINA E P, KUDRYAKOVA N O, RAMENSKAYA L M. Thin-film Al₂O₃ coating on low carbon steel obtained by the sol-gel method with different peptizing acids: Corrosion investigation[J]. Thin Solid Films, 2022, 76: 139 125.
[7] TLILI B, BARKAOUI A, WALOCK M. Tribology and wear resistance of the stainless steel. the sol-gel coating impact on the friction and damage[J]. Tribology International, 2016 102(6): 348-354.
[8] 李楠, 谢志鹏, 易中周, 等. CeO₂稳定ZrO₂陶瓷材料的研究进展[J]. 陶瓷学报, 2020, 41(6): 835-848.
LI N, XIE Z P, YI Z Z, et al. Research progress of CeO₂ stabilized ZrO₂ ceramic materials[J]. Journal of Ceramics, 2020, 41(6): 835-848.
[9] SMS A, GG A, SMSA B, et al. Recent advancements in multifunctional applications of sol-gel derived polymer incorporated TiO₂-ZrO₂ composite coatings: A comprehensive review-Science Direct[J]. Applied Surface Science Advances, 2021, 6: 100 173.
[10] YM A, AA B, GO A, et al. Characterization of stabilized ZrO₂ thin films obtained by sol-gel method-Science Direct[J]. Applied Surface Science, 2021, 569: 150 787.
[11] ZHANG Z H, JI G J. Electrochemical corrosion and frictional corrosion properties of sol-gel ZrO₂ films on stainless steel surface in different NaCl aqueous solutions[J]. Rare Metal Materials and Engineering, 2020, 49(11): 3 748-3 760.
[12] CHECMANOWSKI J G, SZCZYGIEL B. Effect of a ZrO₂ coating deposited by the sol-gel method on the resistance of FeCrAl alloy in high-temperature oxidation conditions[J]. Materials Chemistry & Physics, 2013, 139 (2/3): 944-952.
[13] PRASAD A R, SHAMSHEERA K O, JOSEPH A. Electrochemical and surface characterization of mild steel with corrosion resistant zirconia network fabricated by aqueous sol-gel technique[J]. Journal of the Indian Chemical Society, 2021, 98(4): 100 052.
[14] STAMBOLOVA I, YORDANOV S, LAKOV L, et al. Preparation of sol-gel SiO₂ coatings on steel and their corrosion resistance[J]. Matec Web of Conferences, 2018, 145: 05 011.
[15] BRAGA A, LAGO D, PIMENTA A R, et al. The influence of heat treatment of inorganic conversion coatings produced by sol-gel dip coating on the anticorrosive properties of alumina films deposited on steel substrate-Part I: Single conversion coatings[J]. Surface and Coatings Technology, 2019, 372: 190-200.
[16] 王萌, 董选普, 杨帆, 等. 溶胶-凝胶法制备铝合金陶瓷涂层[J].特种铸造及有色合金, 2015, 35(4) : 427-430.
WANG M, DONG X P, YANG F, et al. Aluminum alloy ceramic coating was prepared by the sol-gel method[J]. Special Casting and Nonferrous Alloy, 2015, 35(4): 427-430.
[17] LUTZLER T, CHARPENTIER T, BARKER R, et al. Evaluation and Characterization of Anti-Corrosion Properties of Sol-Gel Coating in CO₂ Environments[J]. Materials Chemistry and Physics, 2018, 216: 272-277.
[18] 崔丽华. 溶胶-凝胶法制备TiO₂薄膜的研究[J].佛山陶瓷, 2015, 25(2): 13-15.
CUI L H. Preparation of TiO₂ thin films by the sol-gel method[J]. Foshan Ceramics, 2015, 25(2): 13-15.
[19] BESTETTI M, SACCO D, BRUNELLA M F, et al. Photocatalytic degradation activity of titanium dioxide sol-gel coatings on stainless steel wire meshes[J]. Materials Chemistry & Physics, 2010, 124(2/3): 1 225-1 231.
[20] SKH A, VKV B, RV C, et al. Effect of processing conditions on the structural properties and corrosion behavior of TiO₂-SiO₂ multilayer coatings derived via the sol-gel method-Science Direct[J]. Ceramics International, 2020, 46(11): 17 741-17 751.
[21] KARASINSKI P, TYSZKIEWICZ C, DOMANOWSKA A, et al. Low loss, long time stable sol-gel derived silica-titania waveguide films[J]. Materials Letters, 2015, 143(15): 5-7.
[22] 尹春生, 姚正军, 方超, 等. 高温合金GH3039表面ZrO₂-CeO₂/Al₂O₃复合陶瓷涂层抗热震性能[J]. 复合材料学报, 2018, 35(11): 8.
YIN C S, YAO Z J, FANG C, et al. Thermal shock resistance of ZrO₂-CeO₂/Al₂O₃ composite ceramic coating on superalloy GH3039 surface[J]. Journal of Composites, 2018, 35(11): 8.
[23] YANG T C, CHIN T S, CHANG J K, et al. Oxidation resistance of Al₂O₃/SiO₂ nanocomposite coating on hot-dip galvanized steel deposited by chemical immersion and sol-gel coating-Science Direct[J]. Surface and Coatings Technology, 2020, 404: 126 457.
[24] SK A, LBC B, AM A, et al. The effect of the substrate surface state on the morphology, topography and tribocorrosion behavior of Si/Zr sol-gel coated 316L stainless steel-ScienceDirect[J]. Surface and Coatings Technology, 2021, 406: 126 666.
[25] MY A, OO B, TY C, et al. Effect of sol aging time on the wear properties of TiO₂-SiO₂ composite films prepared by a sol-gel method[J]. Tribology International, 2016, 104: 175-182.
[26] VIVES S, MEUNIER C.Mixed SiO₂-TiO₂ (1:1) sol-gel films on mild steel substrates: Sol composition and thermal treatment effects[J]. Surface and Coatings Technology, 2008, 202(11): 2 374-2 378.
[27] AVCB A, DCBDL A, ARP B, et al. The influence of heat treatment of inorganic conversion coatings produced by sol-gel dip coating on the anticorrosive properties of alumina films deposited on steel substrate-Part II: silica/boehmite or boehmite/silica multilayered conversion coatings[J]. Surface and Coatings Technology, 2020, 386: 125 500.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献