电镀硬铬槽液的质量控制要求

胡剑锋, 尹中秋, 毛喆, 黄红武, 黄天勇, 郝锐

doi:10.16577/j.issn.1001-1560.2022.0057

材料保护 >

2022 , Vol. 55 >Issue 2: 195 - 198

DOI: https://doi.org/10.16577/j.issn.1001-1560.2022.0057

实用技术

电镀硬铬槽液的质量控制要求

展开

1. 空军装备部驻郑州地区军事代表室； 2. 航空工业郑飞公司

毛喆(1977-)，本科，高级工程师，从事热处理和表面处理工艺研究工作，电话：13937192827，E-mail：yangqing22@sina.com

收稿日期: 2021-08-24

修回日期: 2021-09-29

录用日期: 2021-10-20

网络出版日期: 2023-12-26

收起

Quality Control Requirements of Electroplating Hard Chromium Bath Solution

Expand

1.Military Representative Office of the Ministry of Air Force Equipment in Zhengzhou, Zhengzhou 450005, China;2.Aviation Industry Zhengfei Company, Zhengzhou 450005, China

Received date: 2021-08-24

Revised date: 2021-09-29

Accepted date: 2021-10-20

Online published: 2023-12-26

Fold

摘要

对电镀硬铬的槽液成分进行简介，并从槽液配制、分析、日常管理3个方面提出了对镀铬槽液质量控制的要求，以确保槽液稳定可靠，从而为制件电镀硬铬质量提供保证。

关键词： 电镀硬铬; 槽液; 控制

本文引用格式

胡剑锋, 尹中秋, 毛喆, 黄红武, 黄天勇, 郝锐 . 电镀硬铬槽液的质量控制要求[J]. 材料保护, 2022 , 55(2) : 195 -198 . DOI: 10.16577/j.issn.1001-1560.2022.0057

Abstract

A brief introduction to the composition of the bath solution for electroplating hard chromium was given.Besides, the requirements for quality control of chromium plating bath solution were put forward from three aspects of bath solution preparation, analysis and daily management to ensure the stability and reliability of bath solution, which would guarantee the quality of hard chromium plating for parts.

Key words： hard chromium plating; bath solution; control

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract