热镀锌炉鼻子加湿工艺控制研究与改进

钱鑫, 刘茂林, 崔磊, 谢义康, 葛浩, 陈德春

doi:10.16577/j.issn.1001-1560.2022.0113

材料保护 >

2022 , Vol. 55 >Issue 4: 186 - 188

DOI: https://doi.org/10.16577/j.issn.1001-1560.2022.0113

实用技术

热镀锌炉鼻子加湿工艺控制研究与改进

展开

马鞍山钢铁股份有限公司

钱鑫(1992-)，本科，工程师，现从事冷轧涂镀技术管理工作，E-mail：570142108@qq.com

收稿日期: 2021-10-20

修回日期: 2021-11-30

录用日期: 2021-12-20

网络出版日期: 2023-12-28

收起

Research and Improvement of Furnace Snout Humidification Process Control for Hot - Dip Galvanizing

Expand

Ma’anshan Iron and Steel Co., Ltd., Ma’anshan 243000, China

Received date: 2021-10-20

Revised date: 2021-11-30

Accepted date: 2021-12-20

Online published: 2023-12-28

Fold

摘要

锌灰是热镀锌生产过程中的重要缺陷，对于高表面级别要求的产品影响较大。在热镀锌生产过程中，锌蒸气在炉鼻子内氧化形成的锌灰容易黏附在带钢表面，影响镀层的表面质量。目前有效的控制措施即采用炉鼻子加湿控制露点，炉鼻子露点控制过高或过低均会产生缺陷。阐述了根据现有工况，通过控制压力、流量等工艺参数，选择合适的露点的控制方法。

关键词： 热镀锌; 炉鼻子; 锌灰; 加湿; 工艺控制

本文引用格式

钱鑫, 刘茂林, 崔磊, 谢义康, 葛浩, 陈德春 . 热镀锌炉鼻子加湿工艺控制研究与改进[J]. 材料保护, 2022 , 55(4) : 186 -188 . DOI: 10.16577/j.issn.1001-1560.2022.0113

Abstract

Zinc ash is a serious defect of hot-dip galvanized process and has great impact on products with high surface level requirements. During galvanizing process, the zinc ash formed by the oxidation of zinc vapor in a furnace snout was easy to adhere to the surface of strip steel, influencing the surface quality of the coating. At present, the effective control measures were to control the dew point by humidifying the furnace snout. If the dew point of the furnace snout was too high or too low, it would produce defects. In this paper, the control methods of selecting the appropriate dew point by controlling the process parameters such as pressure and flow were expounded according to the existing working conditions.

Key words： hot-dip galvanizing; furnace snout; zinc ash; humidification; process control

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract