Email Alert  RSS
试验研究

多弧离子镀TiAlCrN薄膜的制备及其抗氧化性能研究

展开
  • 湖北汽车工业学院材料科学与工程学院
王天国(1978-),博士,教授,研究方向为多弧离子镀硬质薄膜技术,电话:0719-8238783,E - mail: tgwang1978@sina.com

收稿日期: 2021-11-30

  修回日期: 2021-12-15

  录用日期: 2021-01-04

  网络出版日期: 2024-01-08

基金资助

湖北省教育厅科学技术项目(Q20181802)资助

Research on Preparation and Oxidation Resistance of TiAlCrN Film by Multi - Arc Ion Plating

Expand
  • School of Materials Science and Engineering, Hubei University of Automotive Technology, Shiyan 442002, China

Received date: 2021-11-30

  Revised date: 2021-12-15

  Accepted date: 2021-01-04

  Online published: 2024-01-08

摘要

为提高模具钢表面性能,延长模具钢使用寿命,采用多弧离子镀技术在H13模具钢表面制备TiAlCrN薄膜。采用扫描电镜(SEM)、X射线衍射(XRD)等方法研究氮氩流量比对TiAlCrN薄膜的表面形貌、物相组织、硬度、结合力、高温抗氧化性能的影响。研究表明:随着氮氩比的增加,TiAlCrN薄膜表面大颗粒数量先增加后减少,硬度、结合力、高温抗氧化性能先增强后减弱;在氮氩比为8∶2时,TiAlCrN薄膜具有最优性能,氧化前的薄膜硬度达到最大值2 700 HV0.5 N,膜基结合力达到最大值26 N,高温抗氧化性能达到最优。

本文引用格式

付泽钰, 王天国 . 多弧离子镀TiAlCrN薄膜的制备及其抗氧化性能研究[J]. 材料保护, 2022 , 55(5) : 35 -40 . DOI: 10.16577/j.issn.1001-1560.2022.0122

Abstract

In order to improve the surface properties and prolong the service life of die steel, TiAlCrN film was prepared on the surface of H13 die steel by multi - arc ion plating technology. The effects of nitrogen - argon flow ratio on the surface morphology, phase structure, hardness, adhesion, and high temperature oxidation resistance of TiAlCrN film were investigated through scanning electron microscope (SEM) and X - ray diffraction (XRD). Results showed that with the increase of nitrogen argon ratio, the number of large particles on the surface of TiAlCrN film increased first and then decreased, and the hardness, adhesion and high temperature oxidation resistance also increased first and then decreased. When the nitrogen - argon ratio was 8∶2, the as - prepared TiAlCrN film had the optimal properties, such as the maximum hardness of 2700 HV0.5 N, the maximum film - substrate adhesion of 26 N, and the optimal high - temperature oxidation resistance.
文章导航

/