激光织构对材料表面摩擦学性能影响的研究进展
刘明明(1989-),博士,副教授, 研究生导师,主要研究方向为激光微纳加工与表面工程技术,E-mail:mmliu_1221@hotmail.com;
李双建(1989-),博士,副研究员,主要研究方向为激光加工与热喷涂涂层,E-mail:lishuangjian114@163.com
收稿日期: 2023-04-25
修回日期: 2023-05-20
录用日期: 2023-06-12
网络出版日期: 2023-10-15
基金资助
国家自然科学基金青年基金(52205313);山东省自然科学基金青年基金(ZR2022QE161, ZR2022QE189, ZR2022QE050)资助
Research Progress on Effects of Laser Texture on Tribological Properties of Surface of Materials
Received date: 2023-04-25
Revised date: 2023-05-20
Accepted date: 2023-06-12
Online published: 2023-10-15
宋骁睿, 李双建, 侯媛媛, 巴召文, 郑宏宇, 刘明明 . 激光织构对材料表面摩擦学性能影响的研究进展[J]. 材料保护, 2023 , 56(10) : 25 -41 . DOI: 10.16577/j.issn.1001-1560.2023.0233
[1] LU P, WOOD R J K.Tribological performance of surface texturing in mechanical applications—a review [J].Surface Topography: Metrology and Properties, 2020, 8 (4):043001.
[2] HOLMBERG K, ERDEMIR A.Influence of tribology on global energy consumption, costs and emissions [J].Friction, 2017, 5(3): 263-284.
[3] 赵文杰, 王立平, 薛群基.织构化提高表面摩擦学性能的研究进展[J].摩擦学学报, 2011, 31(6): 622-631.ZHAO W J, WANG L P, XUE Q J.Research progress on improving surface tribological properties by texturing[J].Chinese Journal of Tribology, 2011, 31(6): 622-631.
[4] ZHENG L, WU J J, ZHANG S, et al.Bionic Coupling of Hardness Gradient to Surface Texture for Improved Anti -wear Properties [J].J Bionic Eng, 2016, 13 (3):406-415.
[5] GREINER C, SCHAFER M.Bio-inspired scale-like surface textures and their tribological properties [J].Bioinspir Biomim, 2015, 10(4): 7.
[6] DAI Z D, YANG Z X.Macro-/Micro-Structures of Elytra,Mechanical Properties of the Biomaterial and the Coupling Strength Between Elytra in Beetles [J].J Bionic Eng,2010, 7(1): 6-12.
[7] JOSHUA S P,BABU P D.Friction and Wear Characteristics for Laser Surface Textured Rolling Bearing Steel: Effect of Pattern Density, Depth, and Area [J].Transactions of the Indian Institute of Metals, 2022, 75(11): 2 923-2 930.
[8] ZHUKOV A, KOKORA A, TIMONICH D, et al.Surface hardening of cast-iron components by irradiation from an optical quantum generator [J].Soviet Materials Science: A Transl of Fiziko - Khimicheskaya Mekhanika Materialov/Academy of Sciences of the Ukrainian SSR, 1976, 11(1):80-82.
[9] YOSHIDA A, FUJITA K, ANDO S, et al.Study on surface durability of laser - hardened steel roller [J].Bulletin of JSME, 1985, 28(244): 2 407-2 413.
[10] CHEN C C,LIN J,SUEN J,et al.Tribological performance on laser zone textured disks [J].IEEE Transactions on Magnetics, 1997, 33(5): 3 193-3 195.
[11] 陈崇斌, 孙洪庆.历尽艰辛 锐意创新——中国第一台红宝石激光器的研制[J].中国科技史杂志,2009,30(3):347-357.CHEN C B, SUN H Q.Development of the first ruby laser in China[J].The Chinese Journal for the History of Science and Technology, 2009, 30(3): 347-357.
[12] CUI X, DUAN S, GUO J, et al.Bionic multifunctional surface microstructure for efficient improvement of tool performance in green interrupted hard cutting [J].Journal of Materials Processing Technology, 2022, 305: 117587.
[13] WANG H, TIAN L, ZHENG J, et al.The synergetic effects of laser texturing and super-hydrophobic coatings on improving wear properties of steel [J].Tribology International,2022, 173: 107657.
[14] 杨卓娟, 韩志武, 任露泉.激光处理凹坑形仿生非光滑表面试件的高温摩擦磨损特性研究[J].摩擦学学报,2005(4): 374-378.YANG Z J, HAN Z W, REN L Q.Study on high temperature friction and wear characteristics of laser-treated pitshaped biomimetic non-smooth surface specimens[J].Chinese Journal of Tribology, 2005(4): 374-378.
[15] MISHRA S P, POLYCARPOU A A.Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors [J].Tribology International, 2011, 44 (12):1 890-1 901.
[16] SHI B R, PEI X H, WEI S B, et al.Application of bionic non-smooth theory in solid expandable tubular technology[J].Applied Mechanics and Materials, 2014, 461:476-481.
[17] SUDEEP U, TANDON N, PANDEY R.Friction and vibration behaviors of lubricated laser textured point contacts under reciprocating rolling motion with highlights on the used laser parameters [J].Procedia Technology, 2014, 14:4-11.
[18] 刘成龙,郭 峰,黄柏林,等.基于梳齿沟槽阵列的集油表面润滑特性[J].中国表面工程, 2020, 33(5):40-46.LIU C L, GUO F, HUANG B L, et al.Lubrication characteristics of oil - collecting surfaces based on comb - tooth groove arrays[J].China Surface Engineering, 2020, 33(5): 40-46.
[19] CHEN J, LIU D, JIN T, et al.A novel bionic micro-textured tool with the function of directional cutting-fluid transport for cutting titanium alloy [J].Journal of Materials Processing Technology, 2023, 311: 117816.
[20] OBIKAWA T, KAMIO A, TAKAOKA H, et al.Micro-texture at the coated tool face for high performance cutting [J].Int J Mach Tools Manuf, 2011, 51(12): 966-972.
[21] MESCOLA A, PAOLICELLI G, OGILVIE S P, et al.Graphene Confers Ultralow Friction on Nanogear Cogs [J].Small, 2021, 17(47): 9.
[22] QIU Y, KHONSARI M M.Experimental investigation of tribological performance of laser textured stainless steel rings[J].Tribology International, 2011, 44(5): 635-644.
[23] GRABON W, KOSZELA W, PAWLUS P, et al.Improving tribological behaviour of piston ring-cylinder liner frictional pair by liner surface texturing [J].Tribology International,2013, 61: 102-108.
[24] YU H W, WANG X L, ZHOU F.Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure Between Conformal Contacting Surfaces [J].Tribol Lett, 2010, 37(2): 123-130.
[25] 刘腾飞,李瑞珍,张绍林,等.织构化动压轴承热流体润滑特性理论与试验研究[J].中国表面工程, 2023, 36(1): 156-167.LIU T F, LI R Z, ZHANG S L, et al.Theoretical and experimental research on thermal fluid lubrication characteristics of textured dynamic pressure bearings[J].Chinese Surface Engineering, 2023, 36(1): 156-167.
[26] RAMESH A, AKRAM W, MISHRA S P, et al.Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication [J].Tribology International,2013, 57: 170-176.
[27] 王泽霄,陈文刚,张禄中,等.几何特征及工况条件对表面织构摩擦特性影响研究[J].表面技术, 2022, 51(10): 89-100.WANG Z X, CHEN W G, ZHANG L Z, et al.Influence of geometric features and working conditions on surface texture friction properties[J].Surface Technology, 2022, 51(10):89-100.
[28] WANG Z, OLIVEIRA J, ZENG Z, et al.Laser beam oscillating welding of 5A06 aluminum alloys:microstructure,porosity and mechanical properties [J].Optics and Laser Technology, 2019, 111: 58-65.
[29] OLIVEIRA J P, SHEN J, ZENG Z, et al.Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel [J].Scripta Materialia, 2022, 206: 114219.
[30] ZOU M, LIAO C,LIU S,et al.Fiber-tip polymer clampedbeam probe for high - sensitivity nanoforce measurements[J].Light: Science and Applications, 2021, 10(1): 171.
[31] ALIFU N, ZEBIBULA A, ZHANG H, et al.NIR-IIb excitable bright polymer dots with deep-red emission for in vivo through-skull three-photon fluorescence bioimaging [J].Nano Research, 2020, 13: 2 632-2 640.
[32] MOMMA C, NOLTE S, CHICHKOV B N, et al.Precise laser ablation with ultrashort pulses [J].Applied Surface Science, 1997, 109: 15-19.
[33] EZHILMARAN V, VIJAYARAGHAVAN L, VASA N.Investigation of Nd3+: YAG laser aided surface texturing to improve tribological characteristics of piston ring [J].Journal of Laser Micro Nanoengineering, 2017, 12 (3):195-202.
[34] WANG X, ZHENG H.Picosecond laser micro-drilling, engraving and surface texturing of tungsten carbide [J].Journal of Laser Applications, 2018, 30(3): 032203.
[35] ABDEL-RADI M, ABDELMOTAAL H, ANWAR M.Thin-Flap Laser In Situ Keratomileusis-Associated Dry Eye: A Comparative Study Between Femtosecond Laser and Mechanical Microkeratome-Assisted Laser In Situ Keratomileusis [J].Eye and Contact Lens-Science and Clinical Practice, 2022, 48(1): 20-26.
[36] WU M, GUO B, ZHAO Q, et al.The influence of the ionization regime on femtosecond laser beam machining monocrystalline diamond [J].Optics and Laser Technology,2018, 106: 34-39.
[37] QI L T, HU J P.Experimental investigation on femtosecond laser ablation of polycarbonate [J].Advanced Materials Research, 2013, 652: 2 359-2 362.
[38] LUREAU F, MATRAS G, CHALUS O, et al.High-energy hybrid femtosecond laser system demonstrating 2×10 PW capability [J].High Power Laser Science and Engineering,2020, 8: e43.
[39] CHEN G, LI W, WANG G, et al.Generation of coexisting high-energy pulses in a mode-locked all-fiber laser with a nonlinear multimodal interference technique [J].Photonics Research, 2019, 7(2): 187-192.
[40] 毛亚洲.激光织构机理及织构动压滑动轴承摩擦学性能研究[D].洛阳:河南科技大学, 2021.MAO Y Z.Mechanism of laser texture and tribological performance of textured dynamic pressure sliding bearing[D].Luoyang: Henan University of Science and Technology,2021.
[41] LAN L, JIN X, GAO S, et al.Microstructural evolution and stress state related to mechanical properties of electron beam melted Ti-6Al-4V alloy modified by laser shock peening[J].Journal of Materials Science and Technology, 2020,50: 153-161.
[42] KONG D,DONG C,NI X,et al.Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes [J].Journal of Materials Science and Technology, 2019, 35 ( 7):1 499-1 507.
[43] YU Z, YUN F F, WANG Y, et al.Desert beetle-inspired superwettable patterned surfaces for water harvesting [J].Small, 2017, 13(36): 1701403.
[44] LI Y, HUANG X J, HEO S H, et al.Superhydrophobic bionic surfaces with hierarchical microsphere/SWCNT composite arrays [J].Langmuir, 2007, 23(4): 2 169-2 174.
[45] 张金波.深松铲减阻耐磨仿生理论与技术[D].长春:吉林大学, 2014.ZHANG J B.Bionic theory and technology of drag reduction and wear resistance of subsoiling shovel[D].Changchun:Jilin University, 2014.
[46] 张洪敏,汪 涛,鱼银虎,等.类蝴蝶翅膀表面微纳结构的制备及其疏水性[J].中国表面工程, 2014, 27(5):131-136.ZHANG H M, WANG T, YU Y H, et al.Fabrication and hydrophobicity of micro-nano structures on the surface of butterfly - like wings[J].Chinese Surface Engineering,2014, 27(5): 131-136.
[47] ZHANG Y, DENG J, MENG Y, et al.Tribological performance of steel guideway with biomimetic hexagonal micro-textures [J].Surface Engineering, 2020, 36(7): 756-764.
[48] XU Y, LI Z, ZHANG G, et al.Electrochemical corrosion and anisotropic tribological properties of bioinspired hierarchical morphologies on Ti-6Al-4V fabricated by laser texturing [J].Tribology International, 2019, 134: 352-364.
[49] GREINER C, Schäfer M.Bio-inspired scale-like surface textures and their tribological properties [J].Bioinspir Biomim, 2015, 10(4): 044001.
[50] ZHAN X, YI P, LIU Y, et al.Effects of single-and multishape laser-textured surfaces on tribological properties under dry friction [J].Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234(7): 1 382-1 392.
[51] 曾繁铿, 成 雨, 万珍平.圆凹坑-球凸复合织构的激光铣削加工及其摩擦学性能[J].热加工工艺, 2021, 50(14): 88-92.ZENG F K,CHENG Y,WAN Z P.Laser milling of circular pit-spherical convex composite texture and its tribological properties[J].Thermal Processing Technology, 2021, 50(14): 88-92.
[52] SUN K, YANG H, XUE W, et al.Anti-biofouling superhydrophobic surface fabricated by picosecond laser texturing of stainless steel [J].Applied Surface Science, 2018, 436:263-267.
[53] 林乃明, 佘 达, 刘茹溢, 等.激光表面织构化对316L不锈钢摩擦学行为的影响[J].太原理工大学学报,2021, 52(6): 849-855.LIN N M, SHE D, LIU R Y, et al.Effect of laser surface texturing on the tribological behavior of 316L stainless steel[J].Journal of Taiyuan University of Technology,2021,52(6): 849-855.
[54] PAUL JOSHUA S, DINESH BABU P.Effect of laser textured surface with different patterns on tribological characteristics of bearing material AISI 52100 [J].Journal of Central South University, 2020, 27(8): 2 210-2 219.
[55] MAWIGNON F J, QIN L, HUSSAIN M, et al.Laser surface texturing under transformer oil conditions for improved process quality and tribological behaviors [J].Materials Chemistry and Physics, 2023, 295: 127095.
[56] ZHANG N, YANG F, JIANG F, et al.Study of the effect of surface laser texture on tribological properties of cemented carbide materials [J].Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, 234(6/7): 993-1 006.
[57] 马文林, 赵 健, 王府伯.织构化表面对45 钢摩擦磨损性能的影响[J].摩擦学学报, 2023, 43(3): 314-324.MA W L, ZHAO J, WANG F B.Effect of textured surface on friction and wear properties of 45# steel[J].Journal of Tribology, 2022, 42: 1-17.
[58] Grützmacher P G, ROSENKRANZ A, GACHOT C.How to guide lubricants-Tailored laser surface patterns on stainless steel [J].Applied Surface Science, 2016, 370: 59-66.
[59] Vlädescu S C, CINIERO A, TUFAIL K, et al.Optimization of pocket geometry for friction reduction in piston-liner contacts [J].Tribol Trans, 2018, 61(3): 522-531.
[60] ZHANG Z, LU W, HE Y, et al.Research on optimal laser texture parameters about antifriction characteristics of cemented carbide surface [J].International Journal of Refractory Metals and Hard Materials, 2019, 82: 287-296.
[61] 李亚军, 逄显娟, 孙乐民, 等.激光表面织构化对45 钢摩擦磨损性能的影响[J].表面技术, 2018, 47(8):147-154.LI Y J, PANG X J, SUN L M, et al.Effect of laser surface texturing on friction and wear properties of 45 steel[J].Surface Technology, 2018, 47(8): 147-154.
[62] ANNADI R R, SYED I.Impact of multi-scaled surface textures on tribological performance of parallel sliding contact under lubricated condition [J].Tribology International,2023, 183: 108415.
[63] GUO Z, DENG F, ZHANG L, et al.Fabrication and tribological properties of textured diamond coatings on WC-Co cemented carbide surfaces [J].Ceramics International,2021, 47(4): 5 423-5 431.
[64] XIAN J, WANG X, FU X, et al.A simple model to predict machined depth and surface profile for picosecond laser surface texturing [J].Applied Sciences,2018,8(11):2 111.
[65] WAN Q, ZHENG M, YANG S, et al.Features of laser-machined micro-textures on the surface of cemented carbide tool[J].Revista Romana de Materiale, 2019, 49(2):251-258.
[66] Se,k P.The use of statistical functions for the selection of laser texturing parameters [J].Open Engineering, 2020, 10(1): 454-461.
[67] SUGIHARA T, ENOMOTO T.Crater and flank wear resistance of cutting tools having micro textured surfaces [J].Precision Engineering, 2013, 37(4): 888-896.
[68] SASI R, SUBBU S K, PALANI I.Performance of laser surface textured high speed steel cutting tool in machining of Al7075-T6 aerospace alloy [J].Surface and Coatings Technology, 2017, 313: 337-346.
[69] YU M, ZHANG J, WU Y, et al.Respiratory mucosa-inspired “sticky - slippery coating” with transparency and structure adaptation based on comb-polymer nanogel [J].Chemical Engineering Journal, 2023, 452: 139478.
[70] YU M, LIU M, FU S.Slippery antifouling polysiloxanepolyurea surfaces with matrix self-healing and lubricant selfreplenishing [J].ACS Applied Materials and Interfaces,2021, 13(27): 32 149-32 160.
[71] 吴雪峰, 梅三林.飞秒激光对TiAIN 涂层刀具微织构加工参数的优化[J/OL].激光与光电子学进展.https:/ /kns.cnki.net/kcms/detail/31.1690.TN.20220714.1232.168.html.WU X F, MEI S L.Optimization of microtexture processing parameters for TiAIN coated tools by femtosecond laser[J/OL].Laser and Optoelectronics Progress.https:/ /kns.cnki.net/kcms/detail/31.1690.TN.20220714.1232.168.html.
[72] 张 娜, 杨发展, 刘国华, 等.YG8 硬质合金表面沟槽织构的制备及其减摩特性[J].机械工程材料, 2020,44(7): 38-41.ZHANG N,YANG F Z,LIU G H,et al.Preparation of surface groove texture of YG8 cemented carbide and its antifriction properties [J].Mechanical Engineering Materials,2020, 44(7): 38-41.
[73] ROUSHAN A.Influence of laser parameters on the machining performance of textured cutting tools [J].Optics and Laser Technology, 2023, 165: 109569.
[74] 何 霞,廖文玲,王国荣,等.飞秒激光加工织构及织构对磨损的影响研究[J].激光与红外, 2017, 47(10):1 222-1 227.HE X, LIAO W L, WANG G R, et al.Femtosecond laser processing texture and its influence on wear[J].Laser and Infrared, 2017, 47(10): 1 222-1 227.
[75] BARIK D.Investigation of dimple-texturing on the tribological performance of tungsten carbide-AISI H13 steel [J].Experimental Techniques, 2023, 47(3): 565-577.
[76] SEGU D Z, WANG L L, HWANG P, et al.Experimental characterization of friction and wear behavior of textured Titanium alloy (Ti-6Al-4V) for enhanced tribological performance [J].Materials Research Express, 2021, 8(8):085008.
[77] SEGU D Z, LU C, HWANG P, et al.Optimization of tribological characteristics of a combined pattern textured surface using taguchi design [J].Journal of Materials Engineering and Performance, 2021, 30(5): 3 786-3 794.
[78] HU E, ZHI J, WU Y, et al.Fabrication and tribological properties of the laser textured SiC cylinders with diamond coating [J].Applied Physics A, 2023, 129(4): 257.
[79] YANG L, MA W, GAO F, et al.Effect of EDM and femtosecond-Laser groove-texture collision frequency on tribological properties of 0Cr17Ni7Al stainless steel[J].Coating,2022, 12(5): 611.
[80] MENG F, ZHANG Z, GAO P, et al.Excellent tribological properties of epoxy—Ti3C2 with three-dimensional nanosheets composites [J].Friction, 2021, 9: 734-746.
[81] 李 伟.原位自生(TiC+TiB2)/Ni 激光熔覆层的组织和摩擦磨损性能研究[D].镇江:江苏科技大学, 2019.LI W.Study on microstructure and friction and wear properties of in-situ self-generated (TiC+TiB2)/Ni laser cladding layer[D].Zhenjiang: Jiangsu University of Science and Technology, 2019.
[82] 肖贵坚, 陈树林, 李少川, 等.磨粒磨损对砂带磨削TC17 表面完整性的影响研究[J].航空制造技术,2022, 65(4): 26-33.XIAO G J, CHEN S L, LI S H, et al.Research on the Influence of Abrasive Wear on the Surface Integrity of Belt Grinding TC17[J].Aviation Manufacturing Technology,2022, 65(4): 26-33.
[83] 王文安, 刘志奇, 谢志鸣.激光加工表面织构对配流盘重载摩擦副摩擦磨损特性的影响[J].热加工工艺,2022, 51(22): 97-101.WANG W A, LIU Z Q, XIE Z M.Effect of laser machining surface texture on friction and wear characteristics of heavy load friction pair of valve plate[J].Thermal Processing Technology, 2022, 51(22): 97-101.
[84] ZHAO G, HUSSAINOVA I, ANTONOV M, et al.Friction and wear of fiber reinforced polyimide composites [J].Wear, 2013, 301(1/2): 122-129.
[85] SRIVYAS P D, CHAROO M, WANI M, et al.Impact of surface texturing on the tribological behaviour of aluminiumsilicon (Al-Si/Al2O3) advanced composite under dry and lubricating conditions [J].Surface Topography: Metrology and Properties, 2022, 10(3): 035043.
[86] 齐 烨,常秋英,王 斌,等.激光织构对干摩擦性能的影响及机理研究 [J].兵 工 学报, 2015, 36(2):200-205.QI Y, CHANG Q Y, WANG B, et al.Effect and mechanism of laser texture on dry friction properties[J].Journal of Military Engineering, 2015, 36(2): 200-205.
[87] 逄明华,翟帅杰,冯启高,等.硬质合金表面织构液相辅助激光制备及摩擦性能[J].摩擦学学报, 2022, 42(5): 1 001-1 011.PANG M H, ZHAI S J, FENG Q G, et al.Liquid-assisted laser preparation and tribological properties of cemented carbide surface texture [J].Chinese Journal of Tribology,2022, 42(5): 1 001-1 011.
[88] 方何正子.碳纤维复合材料与金属之间的球—面接触干摩擦行为研究[D].广州:华南理工大学, 2020.FANG H Z Z.Research on dry friction behavior of spherical-surface contact between carbon fiber composites and metals[D].Guangzhou: South China University of Technology, 2020.
[89] 范曾智,赵汝焘,王良璧.齿轮传动系统的搅油损失、散热量及传动效率的预测[J].兰州铁道学院学报, 1994(1): 34-40.FAN Z Z, ZHAO R D, WANG L B.Prediction of churning loss, heat dissipation and transmission efficiency of gear transmission system[J].Journal of Lanzhou Railway University, 1994(1): 34-40.
[90] 李子航.激光织构化镀铬活塞环表面微坑制备及摩擦学性能研究[D].太原:中北大学, 2022.LI Z H.Preparation and tribological properties of laser textured chrome - plated piston ring surface micropit [D].Taiyuan: North University of China, 2022.
[91] SAEIDI F, PARLINSKA-WOJTAN M, HOFFMANN P,et al.Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions [J].Wear, 2017,386: 29-38.
[92] SAEIDI F, MEYLAN B, HOFFMANN P, et al.Effect of surface texturing on cast iron reciprocating against steel under starved lubrication conditions: a parametric study [J].Wear, 2016, 348: 17-26.
[93] NIU Y, PANG X, YUE S, et al.The friction and wear behavior of laser textured surfaces in non-conformal contact under starved lubrication [J].Wear, 2021, 476: 203723.
[94] KHAEMBA D N, AZAM A, SEE T, et al.Understanding the role of surface textures in improving the performance of boundary additives, part I: Experimental [J].Tribology International, 2020, 146: 106243.
[95] 马晨波, 朱 华, 历建全.摩擦副不同表面织构化的润滑减摩性能试验研究[J].中国矿业大学学报, 2010,39(2): 244-248.MA C B, ZHU H, LI J Q.Experimental research on lubrication and antifriction performance of friction pair with different surface textures[J].Journal of China University of Mining and Technology, 2010, 39(2): 244-248.
[96] GU C, MENG X, XIE Y, et al.Effects of surface texturing on ring/liner friction under starved lubrication [J].Tribology International, 2016, 94: 591-605.
[97] TOMANIK E, PROFITO F J, ZACHARIADIS D C.Modelling the hydrodynamic support of cylinder bore and piston rings with laser textured surfaces [J].Tribology international, 2013, 59: 90-96.
[98] ETSION I.Modeling of surface texturing in hydrodynamic lubrication [J].Friction, 2013, 1(3): 195-209.
[99] 于海武.基于流体动压润滑效应的表面织构优化设计[D].南京:南京航空航天大学, 2012.YU H W.Optimal design of surface texture based on hydrodynamic lubrication effect[D].Nanjing: Nanjing University of Aeronautics and Astronautics, 2012.
[100] 蒋 雯, 张朝阳, 顾秦铭, 等.复合工艺制备的表面微凹坑织构的摩擦性能研究[J].润滑与密封, 2019, 44(11): 85-89.JIANG W,ZHANG C Y,GU Q M,et al.Tribological properties of surface micro-pit texture prepared by composite process [J].Lubrication Engineering, 2019, 44 (11):85-89.
[101] 禄晓敏, 王权岱, 肖继明, 等.织构化表面空化效应影响润滑性能的CFD 分析[J].润滑与密封, 2016, 41(5): 70-75.LU X M, WANG Q D, XIAO J M, et al.CFD analysis of textured surface cavitation effect affecting lubrication performance[J].Lubrication Engineering, 2016, 41 (5):70-75.
[102] 李东志, 马晨波, 孙见君, 等.考虑空化的倾斜织构表面摩擦学性能CFD 分析[J].润滑与密封, 2018, 43(8): 76-81.LI D Z, MA C B, SUN J J, et al.CFD analysis of tribological properties of inclined textured surface considering cavitation[J].Lubrication Engineering, 2018, 43(8): 76-81.
[103] 刘洪龙, 王文中, 赵自强, 等.表面微织构影响点接触润滑摩擦性能的实验研究[J].润滑与密封, 2014, 39(1): 9-16.
[104] GALDA L, SEP J, OLSZEWSKI A, et al.Experimental investigation into surface texture effect on journal bearings performance[J].Tribology International, 2019, 136: 372-384.
[105] PENG R, ZHANG P, TIAN Z, et al.Effect of textured DLC coatings on tribological properties of titanium alloy under grease lubrication [J].Materials Research Express,2020, 7(6): 066408.
[106] XIONG Z, YU H, GONG X.Designing photothermal superhydrophobic PET fabrics via in situ polymerization and 1, 4-conjugation addition reaction [J].Langmuir, 2022,38(28): 8 708-8 718.
[107] MIAO S, XIONG Z, ZHANG J, et al.Polydopamine/SiO2 hybrid structured superamphiphobic fabrics with good photothermal behavior [J].Langmuir, 2022, 38 ( 30):9 431-9 440.
/
〈 |
|
〉 |