Email Alert  RSS
综述

氮化钼薄膜的制备、性能及其应用研究进展

展开
  • 江南大学机械工程学院
吴宏荣(1991-),博士,讲师,主要研究方向为低维纳米材料表界面物理力学性能,电话:0510-85910562,E-mail:hongrongwu@jiangnan.edu.cn

收稿日期: 2023-04-20

  修回日期: 2023-05-12

  录用日期: 2023-06-21

  网络出版日期: 2023-10-15

基金资助

国家自然科学基金青年基金(12002133);江苏省科技计划项目基金青年基金(BK20200590);江南大学基本科研计划青年基金(JUSRP121040);纳智能材料器件教育部重点实验室开放课题基金项目NJ2022002(INMD-2022M02)资助

Research Progress of the Preparation, Properties and Application of Molybdenum Nitride Films

Expand
  • (College of Mechanical Engineering, Jiangnan University, Wuxi 214122, China)

Received date: 2023-04-20

  Revised date: 2023-05-12

  Accepted date: 2023-06-21

  Online published: 2023-10-15

摘要

氮化钼作为过渡金属氮化物的典型代表,具有良好的导电性以及优异的力学性能、电化学性能,在催化、储能、集成电路、保护涂层等领域有着广泛的应用前景。 然而,目前国内有关氮化钼薄膜的综述较少。 首先总结了氮化钼的分子结构及其物理性能和力学性能;其次总结了氮化钼薄膜的主要制备方法,包括溶液法、溅射法、原子层沉积法以及化学气相沉积法等,归纳了各种氮化钼薄膜制备方法的优缺点及其适用的场景;最后,对氮化钼薄膜的潜在应用前景进行了总结和展望。

本文引用格式

童品森, 魏宁, 吴宏荣 . 氮化钼薄膜的制备、性能及其应用研究进展[J]. 材料保护, 2023 , 56(10) : 182 -193 . DOI: 10.16577/j.issn.1001-1560.2023.0249

Abstract

As a typical representative of transition metal nitride,molybdenum nitride exhibits notable electrical conductivity,excellent mechanical properties, and electrochemistry performance, making it promising in a wide range of applications such as catalysis, energy storage, integrated circuits, and protective coatings.However, there are few molybdenum nitride film-related review articles in Chinese.In this paper, the molecular structure, physical and mechanical properties of molybdenum nitride were first summarized, and then the main preparation methods of molybdenum nitride film were summarized, including solution method, sputtering method, atomic layer deposition method, and chemical vapor deposition method.Meanwhile,the advantages and disadvantages of these methods and their applicable scenarios were summarized.Finally,the potential application prospects of molybdenum nitride film were summarized and prospected.

参考文献

[1] CHU X, WONG M S, SPROUL W D, et al.Deposition,structure, and hardness of polycrystalline transition-metal nitride superlattice films[J].Journal of Materials Research,1999, 14(6): 2 500-2 507.

[2] SHEBANOVA O, SOIGNARD E, MCMILLAN P F, et al.Compressibilities and phonon spectra of high-hardness transition metal-nitride materials[J].High Pressure Research,2006, 26(2):87-97.

[3] YANG M, DISALVO F J.Template-free synthesis of mesoporous transition metal nitride materials from ternary cadmium transition metal oxides[J].Chemistry of Materials,2012, 24(22):4 406-4 409.

[4] ECK B, DRONSKOWSKI R, TAKAHASHI M, et al.Theoretical calculations on the structures,electronic and magnetic properties of binary 3d transition metal nitrides[J].Journal of Materials Chemistry, 1999, 9(7): 1 527-1 537.

[5] WIENER G W, BERGER J A.Structure and magnetic properties of some transition metal nitrides[J].JOM, 1955, 7(2):360-368.

[6] QI W, ZHOU Y, LIU S, et al.Oxidized impurity in transition metal nitride for improving the hydrogen evolution efficiency of transition metal nitride-based catalyst[J].Applied Materials Today, 2020, 18:100476.

[7] ISHII S, SUGAVANESHWAR R P, NAGAO T.Titanium nitride nanoparticles as plasmonic solar heat transducers[J].The Journal of Physical Chemistry C, 2016, 120(4):2 343-2 348.

[8] CAO X,SATO A,NINOMIYA Y,et al.Oxygen-doped zinc nitride as a high-mobility nitride-based semiconductor[J].The Journal of Physical Chemistry C, 2015, 119(10):5 327-5 333.

[9] HO C T, LOW K B, KLIE R F, et al.Synthesis and characterization of semiconductor tantalum nitride nanoparticles[J].The Journal of Physical Chemistry C, 2011, 115(3):647-652.

[10] BEZINGE A, YVON K, MULLER J, et al.High-pressure high-temperature experiments on δ-MoN[J].Solid State Communications, 1987, 63(2):141-145.

[11] BULL C L,KAWASHIMA T,MCMILLAN P F,et al.Crystal structure and high-pressure properties of γ-Mo2N determined by neutron powder diffraction and X-ray diffraction[J].Journal of Solid State Chemistry, 2006, 179(6):1 762-1 767.

[12] ETTMAYER P.Das System Molybdän-Stickstoff[J].Monatshefte für Chemie/Chemical Monthly, 1970, 101 (1):127-140.

[13] BLAHA P, REDINGER J, SCHWARZ K.Bonding study of TiC and TiN.II.theory[J].Physical Review B, 1985, 31(4): 2 316-2 325.

[14] PAPACONSTANTOPOULOS D A, PICKETT W E, KLEIN B M, et al.Electronic properties of transition - metal nitrides: The group -V and group - VI nitrides VN, NbN,TaN, CrN, MoN, and WN[J].Physical Review B, 1985,31(2):752-761.

[15] DING L P, SHAO P, ZHANG F H, et al.Prediction of molybdenum nitride from first-principle calculations: crystal structures, electronic properties, and hardness[J].The Journal of Physical Chemistry C, 2018, 122(36):21 039-21 046.

[16] JIANG G, XU F, YANG S, et al.Mesoporous, conductive molybdenum nitride as efficient sulfur hosts for high-performance lithium - sulfur batteries[J].Journal of Power Sources, 2018, 395:77-84.

[17] WANG Y, JIAN C, HONG W, et al.Nonlayered 2D ultrathin molybdenum nitride synthesized through the ammonolysis of 2D molybdenum dioxide[J].Chemical Communications, 2021, 57(2):223-226.

[18] JOSHI S, WANG Q, PUNTAMBEKAR A, et al.Facile synthesis of large area two dimensional layers of transition metal nitride and their use as insertion electrodes[J].ACS Energy Letters, 2017, 2(6): 1 257-1 262.

[19] LV F, MA H, SHEN L, et al.Wearable helical molybdenum nitride supercapacitors for self-powered healthcare smartsensors[J].ACS Applied Materials & Interfaces, 2021,13(25): 29 780-29 787.

[20] JAUBERTEAU I, BESSAUDOU A, MAYET R, et al.Molybdenum nitride films: crystal structures, synthesis, mechanical, electrical and some other properties[J].Coatings, 2015, 5(4):656-687.

[21] XIE J, LI S, ZHANG X, et al.Atomically-thin molybdenum nitride nanosheets with exposed active surface sites for efficient hydrogen evolution[J].Chemical Science,2014,5(12): 4 615-4 620.

[22] SHANG L, ZHAO Y, KONG X Y, et al.Underwater superaerophobic Ni nanoparticle-decorated nickel-molybdenum nitride nanowire arrays for hydrogen evolution in neutral media[J].Nano Energy, 2020, 78:105375.

[23] KREIDER M E, STEVENS M B, LIU Y, et al.Nitride or oxynitride? elucidating the composition-activity relationships in molybdenum nitride electrocatalysts for the oxygen reduction reaction[J].Chemistry of Materials, 2020, 32(7):2 946-2 960.

[24] ZHU Y, CHEN G, XU X, et al.Enhancing electrocatalytic activity for hydrogen evolution by strongly coupled molybdenum nitride@ nitrogen-doped carbon porous nano-octahedrons[J].ACS Catalysis, 2017, 7(5): 3 540-3 547.

[25] LI Y, WEI X, CHEN L, et al.Nickel-molybdenum nitride nanoplate electrocatalysts for concurrent electrolytic hydrogen and formate productions[J].Nature Communications,2019, 10(1): 5 335.

[26] ZHU L,SUN L,ZHANG H,et al.Dual-phase molybdenum nitride nanorambutans for solar steam generation under one sun illumination[J].Nano Energy, 2019, 57:842-850.

[27] GUAN H, YI W, LI T, et al.Low temperature synthesis of plasmonic molybdenum nitride nanosheets for surface enhanced Raman scattering [J].Nature Communications,2020, 11(1): 3 889.

[28] BONDAR O V, POSTOL’NYI B A, BERESNEV V M, et al.Composition, structure and tribotechnical properties of TiN, MoN single-layer and TiN/MoN multilayer coatings[J].Journal of Superhard Materials, 2015, 37(1):27-38.

[29] WANG J, MUNROE P, ZHOU Z, et al.Nanostructured molybdenum nitride-based coatings: Effect of nitrogen concentration on microstructure and mechanical properties[J].Thin Solid Films, 2019, 682:82-92.

[30] QIAN J, LI S, PU J, et al.Effect of heat treatment on structure and properties of molybdenum nitride and molybdenum carbonitride films prepared by magnetron sputtering[J].Surface and Coatings Technology, 2019, 374:725-735.

[31] SAVVIDES N, BELL T J.Hardness and elastic modulus of diamond and diamond -like carbon films[J].Thin Solid Films, 1993, 228(1/2):289-292.

[32] NOVIKOV N V, DUB S N.Hardness and fracture toughness of CVD diamond film[J].Diamond and Related Materials,1996, 5(9): 1 026-1 030.

[33] DUB S, LYTVYN P, STRELCHUK V, et al.Vickers hardness of diamond and c-BN single crystals: AFM Approach[J].Crystals, 2017, 7(12):369.

[34] KRYSINA O, SHUGUROV V V, KOVAL N, et al.Influence of plasma assistance on arc deposited MoN coatings[C]/ /Key Engineering Materials.Switzerland: Trans Tech Publications, 2016.

[35] WANG C, SONG L, ZHOU Y.Excellent hardness property of bulk MoN fabricated by a novel method[J].Results in Physics, 2020, 19:103362.

[36] Sanjinés R, HONES P, Lévy F.Hexagonal nitride coatings:electronic and mechanical properties of V2 N, Cr2 N and δ-MoN[J].Thin Solid Films, 1998, 332(1/2):225-229.

[37] BERESNEV V M, BONDAR O V, POSTOLNYI B O, et al.Comparison of tribological characteristics of nanostructured TiN, MoN, and TiN/MoN Arc-PVD coatings[J].Journal of Friction and Wear, 2014, 35(5):374-382.

[38] KACZMAREK D, DOMARADZKI J, WOJCIESZAK D, et al.Hardness of nanocrystalline TiO2 thin films: Journal of Nano Research[C].Switzerland: Trans Tech Publications,2012.

[39] JOGIAAS T, ZABELS R, TARRE A, et al.Hardness and modulus of elasticity of atomic layer deposited Al2 O3-ZrO2 nanolaminates and mixtures[J].Materials Chemistry and Physics, 2020, 240:122270.

[40] Alén P, RITALA M, ARSTILA K, et al.Atomic layer deposition of molybdenum nitride thin films for Cu metallizations[J].Journal of The Electrochemical Society, 2005,152(5):G361.

[41] Stöber L, KONRATH J P, KRIVEC S, et al.Impact of sputter deposition parameters on molybdenum nitride thin film properties[J].Journal of Micromechanics and Microengineering, 2015, 25(7):074001.

[42] OYAMA S T.Introduction to the chemistry of transition metal carbides and nitrides[M].Dordrecht: Springer, 1996.

[43] WANG S, ANTONIO D, YU X, et al.The hardest superconducting metal nitride[J].Scientific Reports, 2015, 5(1): 13 733.

[44] TSUNEOKA T, MAKISE K, MAEDA S, et al.Localization and pair breaking parameter in superconducting molybdenum nitride thin films[J].Journal of Physics: Condensed Matter, 2016, 29(1): 015701.

[45] INUMARU K, BABA K, YAMANAKA S.Synthesis and characterization of superconducting β - Mo2N crystalline phase on a Si substrate: an application of pulsed laser deposition to nitride chemistry [J].Chemistry of Materials,2005, 17(24): 5 935-5 940.

[46] INUMARU K, NISHIKAWA T, NAKAMURA K, et al.High-pressure synthesis of superconducting molybdenum nitride δ-MoN by in situ nitridation[J].Chemistry of Materials, 2008, 20(14): 4 756-4 761.

[47] MARCHAND R, TESSIER F, DISALVO F J.New routes to transition metal nitrides: preparation and characterization of new phases[J].Journal of Materials Chemistry, 1999, 9(1):297-304.

[48] BULL C L, MCMILLAN P F, SOIGNARD E, et al.Determination of the crystal structure of δ-MoN by neutron diffraction[J].Journal of Solid State Chemistry, 2004, 177(4/5):1 488-1 492.

[49] GEORGE S M.Atomic layer deposition: an overview[J].Chemical Reviews, 2010, 110(1):111-131.

[50] JUPPO M, RITALA M, Leskelä M.Use of 1,1-dimethylhydrazine in the atomic layer deposition of transition metal nitride thin films[J].Journal of the Electrochemical Society, 2000, 147(9): 3 377.

[51] NANDI D K, SEN U K, CHOUDHURY D, et al.Atomic layer deposited molybdenum nitride thin film: a promising anode material for Li ion batteries[J].ACS Applied Materials & Interfaces, 2014, 6(9): 6 606-6 615.

[52] JANG Y, KIM J B, HONG T E, et al.Highly-conformal nanocrystalline molybdenum nitride thin films by atomic layer deposition as a diffusion barrier against Cu[J].Journal of Alloys and Compounds, 2016, 663:651-658.

[53] JOO Y H, NANDI D K, RAMESH R, et al.Atomic layer deposited Mo2N thin films using Mo(CO)6 and NH3 plasma as a Cu diffusion barrier[J].Journal of Alloys and Compounds, 2021, 858:158314.

[54] FIX R, GORDON R G, HOFFMAN D M.Low-temperature atmospheric-pressure metal-organic chemical vapor deposition of molybdenum nitride thin films[J].Thin Solid Films,1996, 288(1/2):116-119.

[55] NAKAJIMA T,SHIRASAKI T.Chemical vapor deposition of tungsten carbide, molybdenum carbide nitride, and molybdenum nitride films[J].Journal of the Electrochemical Society, 1997, 144(6): 2 096.

[56] SUN G D,ZHANG G H,CHOU K C.Synthesis of molybdenum nitrides nanosheets by nitriding 2H-MoS2 with ammonia[J].Journal of the American Ceramic Society, 2018,101(7): 2 796-2 808.

[57] HONG Y L, LIU Z, WANG L, et al.Chemical vapor deposition of layered two-dimensional MoSi2 N4 materials[J].Science, 2020, 369(6 504):670-674.

[58] WANG L, LIU D, WU B, et al.Ultrafast growth of thin hexagonal and pyramidal molybdenum nitride crystals and films[J].ACS Materials Letters, 2019, 1(4):383-388.

[59] Stöber L, KONRATH J P, HABERL V, et al.Nitrogen incorporation in sputter deposited molybdenum nitride thin films[J].Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films, 2016, 34(2):021513.

[60] SHEN Y G.Effect of deposition conditions on mechanical stresses and microstructure of sputter-deposited molybdenum and reactively sputter-deposited molybdenum nitride films[J].Materials Science and Engineering: A, 2003, 359(1/2):158-167.

[61] ANITHA V P, BHARACHARYA A, PATIL N G, et al.Study of sputtered molybdenum nitride as a diffusion barrier[J].Thin Solid Films, 1993, 236(1/2):306-310.

[62] KIM T H, NANDI D K, RAMESH R, et al.Some insights into atomic layer deposition of MoNx using Mo(CO)6 and NH3 and its diffusion barrier application[J].Chemistry of Materials, 2019, 31(20): 8 338-8 350.

[63] HAHN R, Koutná N, Wójcik T, et al.Mechanistic study of superlattice - enabled high toughness and hardness in MoN/TaN coatings[J].Communications Materials, 2020,1(1):1-11.

[64] 涂禄强,徐 锋,田 帅,等.立方氮化硼涂层刀具制备及切削性能研究现状[J].机械制造与自动化, 2020, 49(1):16-19.TU L Q, XU F, TIAN S, et al.Recent advances under study of deposition and cutting performance of cubic boron nitride coated cutting tools[J].Machine Building & Automation, 2020, 49(1):16-19.

[65] GUJRATI A, SANNER A, KHANAL S R, et al.Comprehensive topography characterization of polycrystalline diamond coatings [J].Surface Topography: Metrology and Properties, 2021, 9(1):014003.

[66] PENG J, XIONG C, LIAO J, et al.Study on the effect of Ar-containing work gas on the microstructure and tribological behavior of nanocrystalline diamond coatings[J].Tribology International, 2021, 153:106667.

[67] WANG J, ZHANG F L, ZHANG T, et al.Preparation of Ni-P-diamond coatings with dry friction characteristics and abrasive wear resistance[J].International Journal of Refractory Metals and Hard Materials, 2018, 70:32-38.

[68] 万书宏, 林 晶, 冯 帅.热丝CVD 法制备金刚石涂层刀具的研究现状[J].真空, 2022, 59(1):40-47.WAN S H, LIN J, FENG S.Research progress of diamond coated tools prepared by hot filament CVD[J].Vacuum,2022, 59(1):40-47.

[69] 王 云,谢小豪,汪艳亮,等.硬质合金刀具涂层的研究进展[J].有色金属科学与工程, 2019, 10(1):60-66.WANG Y, XIE X H, WANG Y L, et al.Latest progress in the preparation of cemented carbide tool coatings[J].Nonferrous Metals Science and Engineering, 2019,10(1):60-66.

[70] AZINEE S N, NORSILAWATI N, BABA N B, et al.Investigation on cutting feasibility on Ni-c-BN on HSS substrates for aerospace material[C]/ /IOP Conference Series: Materials Science and Engineering.Gothenburg: IOP Publishing,2021.

[71] GILEWICZ A, WARCHOLINSKI B, MURZYNSKI D.The properties of molybdenum nitride coatings obtained by cathodic arc evaporation[J].Surface and Coatings Technology, 2013, 236:149-158.

[72] SUSZKO T, Gulbin'ski W, JAGIELSKI J.The role of surface oxidation in friction processes on molybdenum nitride thin films[J].Surface and Coatings Technology,2005,194(2/3):319-324.

[73] Gulbiskin' W, SUSZKO T.Thin films of MoO3-Ag2O binary oxides-the high temperature lubricants[J].Wear, 2006,261(7/8):867-873.

[74] WANG T, ZHANG J, LI Y, et al.Self-lubricating TiN/MoN and TiAlN/MoN nano-multilayer coatings for drilling of austenitic stainless steel[J].Ceramics International,2019, 45(18):24 248-24 253.

[75] CHEN L F, FENG Y, LIANG H W, et al.Macroscopicscale three-dimensional carbon nanofiber architectures for electrochemical energy storage devices[J].Advanced Energy Materials, 2017, 7(23):1700826.

[76] GUO Y G, HU J S, WAN L J.Nanostructured materials for electrochemical energy conversion and storage devices[J].Advanced Materials, 2008, 20(15): 2 878-2 887.

[77] WINTER M,BESENHARD J O,SPAHR M E,et al.Insertion electrode materials for rechargeable lithium batteries[J].Advanced Materials, 1998, 10(10):725-763.

[78] WANG L, ZHANG K, PAN H, et al.2D molybdenum nitride nanosheets as anode materials for improved lithium storage[J].Nanoscale, 2018, 10(40):18 936-18 941.

文章导航

/