Today is Email Alert  RSS

Optimization of Accelerated Corrosion of Steel Rebars by Multidirectional Current Imposition

Expand
  • School of Civil Engineering and Architecture,Zhejiang University of Science and Technology,Hangzhou 310023,China

Received date: 2022-09-30

  Revised date: 2022-10-15

  Accepted date: 2022-11-13

  Online published: 2023-03-15

Abstract

Imposing anode current is widely used in the artificial accelerated corrosion of steel rebars.However,the uneven current distribution in series or parallel accelerated corrosion circuits often lead to uneven corrosion degree of steel bars.In order to optimize the accelerated corrosion method of steel rebars by imposing anode current,a multidirectional hybrid connection circuit was proposed and the accelerated corrosion test of steel rebars was carried out.The current,change of corrosion potential and corrosion current density,corrosion rate and corrosion products of each group of steel rebar specimens under three accelerated corrosion modes of hybrid connection,series connection and parallel connection were compared and analyzed.Results showed that the current distributions of steel rebars in series and parallel circuits were different,which led to different corrosion degree of steel rebar.In the hybrid connection,the current distribution was uniform and the corrosion degree of steel rebar surfaces were similar,and the corrosion rate of each steel rebar was close to the theoretical value.The uniform accelerated corrosion of steel rebars or reinforced concrete specimens could be realized through the multidirectional hybrid connection circuit,which effectively optimized the effect of accelerated corrosion of steel rebars and provided reference for accelerated corrosion of steel rebars or reinforced concrete members.

Cite this article

YE Jin-jian, TONG Yun-yun, WANG Qian-nan . Optimization of Accelerated Corrosion of Steel Rebars by Multidirectional Current Imposition[J]. Materials Protection, 2023 , 56(3) : 41 -48 . DOI: 10.16577/j.issn.1001-1560.2023.0058

References

[1] 艾志勇,叶 快,俞 博,等.迁移型阻锈剂用于钢筋锈蚀修复及其存在的问题[J].功能材料,2018,49(12):12 039-12 044.AI Z Y,YE K,YU B,et al.Using migrating corrosion inhibitors for rehabilitation of corrosive reinforcing steel and the existing problems [J].Journal of Functional Materials,2018,49(12): 12 039-12 044.

[2] 耿文超,张 鹏,李 丹,等.钢筋锈蚀监测方法在混凝土中的应用及现状[J].混凝土,2018(2): 150-153.GENG W C,ZHANG P,LI D,et al.Application and status quo of reinforcement corrosion monitoring in concrete [J].Concrete,2018(2): 150-153.

[3] 艾志勇,舒小平,荣 耀,等.混凝土钢筋锈蚀防治技术研究与应用进展评述[J].材料保护,2020,53(9):114-120.AI Z Y,SHU X P,RONG Y,et al.A Review on research and application status on corrosion prevention technologies of steel in concrete [J].Materials Protection,2020,53(9):114-120.

[4] TAMER A E M,KHALED A S.Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete[J].Journal of Materials in Civil Engineering,2003,15(1): 41-47.

[5] ALMUSALLAM A A,AL-GAHTANI A S,AZIZ A R,et al.Effect of reinforcement corrosion on bond strength[J].Construction & Building Materials,1996,10 ( 2):123-129.

[6] 袁迎曙,贾福萍,蔡 跃.锈蚀钢筋的力学性能退化研究[J].工业建筑,2000,30(1): 43-46.YUAN Y S,JIA F P,CAI Y.Deterioration of mechanical behavior of corroded steel bar[J].Industrial Construction,2000,30(1): 43-46.

[7] 曾严红,顾祥林,张伟平,等.混凝土中钢筋加速锈蚀方法探讨[J].结构工程师,2009,25(1): 101-105.ZENG Y H,GU X L,ZHANG W P,et al.Accelerated corrosion technique for reinforcement steel bars in concrete[J].Structural Engineers,2009,25(1): 101-105.

[8] 杨晓明,吴天宇,陈永林.人工加速锈蚀钢筋混凝土构件中钢筋锈蚀率与锈蚀电流的关系研究[J].硅酸盐通报,2016(10): 3 410-3 416.YANG X M,WU T Y,CHEN Y L.Relationship between the current and corrosion ratio in corroded reinforced concrete component obtained by artificial accelerated corrosion method [J].Bulletin of The Chinese Ceramic Society,2016(10): 3 410-3 416.

[9] 林碧兰,徐玉野.HRB400 钢筋在模拟混凝土孔隙液中的电化学腐蚀行为[J].长江大学学报(自然科学版),2010,7(4): 143-147.LIN B L,XU Y Y.Electrochemical Corrosion Behavior of HRB400 Steel Bar in Simulated Concrete Pore Solutions[J].Journal of Yangtze University (Nat Sci Edit),2010,7(4): 143-147.

[10] HONG S X,ZHENG F,SHI G Y,et al.Determination of impressed current efficiency during accelerated corrosion of reinforcement[J].Cement and Concrete Composites,2020,108: 103 536.

[11] 洪舒贤,郑 帆,史桂昀,等.钢筋通电锈蚀过程电流有效性分析[J].深圳大学学报(理工版),2019,36(1):94-100.HONG S X,ZHENG F,SHI G Y,et al.Investigation on current effectiveness in the process of current accelerated corrosion of reinforcing steel [J].Journal of Shenzhen University Science and Engineering,2019,36(1): 94-100.

[12] 闫军印,李 森.混凝土中钢筋通电加速锈蚀与自然锈蚀的对比[J].山西建筑,2012,38(29): 141-142.YAN J Y,LI S.On comparison between reinforcement electrified accelerated corrosion and natural corrosion of concrete[J].Shanxi Architecture,2012,38(29): 141-142.

[13] 范春华,李国祥,李雪莹,等.AM355 不锈钢在酸性溶液中的腐蚀电化学行为[J].材料科学与工程学报,2018,36(1): 121-124.FAN C H,LI G X,LI X Y,et al.Electrochemical corrosion behavior of AM355 stainless steel in acid solution [J].Journal of Materials Science and Engineering,2018,36(1): 121-124.

[14] 杨勇涛,贡金鑫,赵尚传.钢筋混凝土结构中钢筋的腐蚀电流密度[J].公路交通科技(应用技术版),2010,6(5): 137-141.YANG Y T,GONG J X,ZHAO S C.Corrosion current density of steel bar in reinforced concrete structures [J].Journal of Highway and Transportation Research and Development,2010,6(5): 137-141.

[15] 杨 婷,李克华,颜 涛,等.2 种基于胺甲基化反应的缓蚀剂对碳钢的缓蚀行为[J].材料保护,2019,52(10): 26-30.YANG T,LI K H,YAN T,et al.Corrosion Inhibition of Two Kinds of Corrosion Inhibitors Based on Amine Methylation Reaction for Carbon Steel [J].Materials Protection,2019,52(10): 26-30.

[16] STERN M,GEARY A.A theorical analysis of the shape of polarization curves[J].Journal of the Electromical Society,1957,104(1): 56-63.

[17] SHI W,DONG Z H,KONG D J,et al.Application of wire beam electrode technique to investigate initiation and propagation of rebar corrosion[J].Cement and Concrete Research,2013,48(1): 25-33.

[18] SHI W,WANG T Z,DONG Z H,et al.Application of wire beam electrode technique to investigate the migrating behavior of corrosion inhibitors in mortar[J].Construction and Building Materials,2017,134(1): 167-175.

[19] ANDRADE C.Propagation of reinforcement corrosion: principles,testing and modelling[J].Materials and Structures,2019,52(1): 1-26.

[20] 冯伟鹏.钢筋通电加速锈蚀方法与锈蚀效率的研究及其应用[D].深圳: 深圳大学,2015.FENG W P.Experimental research on the electric accelerated corrosion method and current efficiency[D].Shenzhen:Shenzhen University,2015.

[21] 石焕荣,魏无际,丁 毅,等.热镀锌和锌铝合金镀层的微观组织及盐雾腐蚀行为[J].材料保护,2002(3):35-36.SHI H R,WEI W J,DING Y,et al.Microstructures and Salt Spray Corrosion Behaviors of Hot-Dip Zn and 55Al-Zn Coatings [J].Materials Protection,2002(3): 35-36.

[22] 郑 帆,史桂昀,董必钦,等.钢筋混凝土通电加速锈蚀行为可视化表征[J].硅酸盐学报,2018,46(8):1 081-1 086.ZHENG F,SHI G Y,DONG B Q,et al.Visual Characterization on Current Accelerated Corrosion Profile of Reinforcements [J].Bulletin of The Chinese Ceramic Society,2018,46(8): 1 081-1 086.

[23] 干伟忠,金伟良,高明赞.混凝土中钢筋加速锈蚀试验适用性研究[J].建筑结构学报,2011,32(2): 41-47.GAN W Z,JIN W L,GAO M Z.Applicability study on accelerated corrosion methods of steel bars in concrete structure [J].Journal of Building Structures,2011,32(2):41-47.

Outlines

/