Preparation，Microstructure and Properties of Copper Matrix Protective Coatings for Blast Furnace Tuyere
Received date: 2022-09-15
Revised date: 2022-10-15
Accepted date: 2022-11-07
Online published: 2023-08-04
Key words：
blast furnace tuyere; pure copper; embedded co-infiltration; coating; microhardness
QIAO En-tao, WANG Zhou-fu, MA Yan, LIU Hao, WANG Xi-tang . Preparation，Microstructure and Properties of Copper Matrix Protective Coatings for Blast Furnace Tuyere[J]. Materials Protection, 2023 , 56(3) : 74 -80 . DOI: 10.16577/j.issn.1001-1560.2023.0062
[1] ZHANG J，WANG R D，HU R，et al.Failure mode and mechanism of a blast furnace tuyere[J].Engineering Failure Analysis，2022，137:106 294.
[2] GORBATYUK S M，SAYFULLAEV S，KOBELEV O A，et al.Choice of thermal insulation for burnout protection of a blast furnace blast tuyere[J].Materials Today: Proceedings，2021，38(4):1 388-1 391.
[3] 章 超，吕金金，白 丹，等.高炉风口小套表面防护技术的研究进展[J].表面技术，2021，50(4):135-150.ZHANG C，LV J J，BAI D，et al.Research process of surface protection technology for tuyere small sleeve of blast furnace[J].Surface Technology，2021，50(4):135-150.
[4] 孙丽月.纯铜表面金属夹嵌陶瓷复合涂层技术研究[D].阜新:辽宁工程技术大学，2009.SUN L Y.Research on the properties of metal embedded ceramic composite coating in copper[D].Fuxin: Liaoning Technical University，2009.
[5] XIANG X，WANG X L，ZHANG G K，et al.Preparation technique and alloying effect of aluminide coatings as tritium permeation barriers: A review[J].International Journal of Hydrogen Energy，2015，40(9): 3 697-3 707，
[6] 胡 坚.高炉风口长寿化堆焊工艺及装置研究[D].武汉:华中科技大学，2015.HU J.Research on longevity arc deposition process and equipment of blast furnace tuyere[D].Wuhan:Huazhong University of Science ＆ Technology，2015.
[7] 陆隆文，胡 坚，张海鸥，等.面向高炉风口小套长寿化的表面堆焊工艺[J].特种铸造及有色合金，2016，36(5):469-473.LU L W，HU J，ZHANG H O，et al.Surface overlaying welding for longe-service sleeve of blast furnace tuyere [J].Special Casting and Non-ferrous Alloy，2016，36(5):469-473.
[8] ZHANG C，WANG R D，ZHANG J，et al.Investigation on high-temperature stability of Ni60A alloy coating on copper substrate fabricated by plasma cladding[J].Materials Chemistry and Physics，2022，287:126 378.
[9] 张冀翔，徐修炎，宋健斐，等.粉末包埋渗铝研究进展[J].热加工工艺，2018，47(4):22-25.ZHANG J X，XU X Y，SONG J F，et al.Resrarch progess of pack cementation aluminizing[J].Hot Working Technology，2018，47(4):22-25.
[10] 李广忠，王 昊，金 辉，等.渗铝G115 钢的制备及其在模拟煤炭超临界水气化中的腐蚀行为[J].材料保护，2021，54(12):30-35.LI G Z，WANG H，JIN H，et al.Preparation of aluminizing G115 steel and its corrosion behavior in simulation supercritical water gasification of coal[J].Materials Protection，2021，54(12):30-35.
[11] WANG Y，LIU D W，FENG S J，et al.Preparation of tritium permeation barrier consisting of titanium by the pack cementation method[J].Surface and Coatings Technology，2016，307: 271-277.
[12] 秦泽华，杨 阳，黄祖江，等.铌基合金表面Al-B 包埋共渗层的组织及抗氧化性能[J].材料保护，2015，48(7):15-19.QIN Z H，YANG Y，HUANG Z J，et al.Microstructure and oxidation resistance of Al-B embedded co-infiltrating Layer on Niobium-Based Alloys [J].Materials Protection，2015，48(7):15-19.
[13] CHEN X H，ZHANG P Z，WEI D B，et al.Preparation and characterization of Cr/CrC multilayer on γ-TiAl alloy by the double glow plasma surface alloying technology[J].Materials Letters，2018，215: 292-295.
[14] 张金龙，乔 杰，王晓霞.高炉风口Al-Fe 共渗表面强化研究[J].内蒙古科技大学学报，2015，34(2):118-121.ZHANG J L，QIAO J，WANG X X.Study on surface of blast furnace tuyere by Al -Fe penetration[J].Inner Mongolia University of Science and Technology，2015，34 (2):118-121.
[15] 刘建局.纯铜铝铁共渗的实验研究[D].上海:上海交通大学，2008.LIU J J.Experimental study on the copper Fe-aluminizing[D].Shanghai:Shanghai Jiao Tong University，2008.
[16] 袁庆龙，苏永安.纯铜表面Al-Ni 基自熔合金粉末共渗研究[J].太原理工大学学报，2002，33(3):320-323.YUAN Q L，SU Y A.Multielement penetration of Al and Nibased self-fusion alloy powder on the surfance of pure copper[J].Journal of Taiyuan University of Technology，2002，33(3):320-323.
[17] 李涌泉.TiAl 合金表面Si-Al-Y 共渗层的组织与性能研究[D].西安:西北工业大学，2014.LI Y Q.Microstructure and performance of Si-Al-Y co-deposition coating on the surfance of TiAl alloy[D].Xi’an:Northwestern Polytechnical University，2014.
[18] LI Y Q，XIE F Q，WU X Q.Microstructure and high temperature oxidation resistance of Si-Y co-deposition coatings prepared on TiAl alloy by pack cementation process[J].Transactions of Nonferrous Metals Society of China，2015，25(3):803-810.
/
| 〈 |
|
〉 |
