Today is Email Alert  RSS

Problems and Suggestions in the Resistivity Measurement of the External Anti-Corrosion Coating of Buried Steel Pipelines

Expand
  • 1.PipeChina Sichuan East Natural Gas Transmission Pipeline Co.,Ltd.,Nanjing 211106,China;2.China Petroleum Pipeline Research Institute Co.,Ltd.,Langfang 065000,China

Received date: 2022-08-26

  Revised date: 2022-09-15

  Accepted date: 2022-10-20

  Online published: 2023-02-15

Abstract

The resistivity of the anti-corrosion coating of buried steel pipeline is an important parameter.In recent years,the value of this parameter has been used to evaluate the overall quality of the anti-corrosion coating of in-service or directional drilling pipelines.All the domestic standards regarding the on-site measurement of this parameter and the evaluation of the overall quality of the anti-corrosion coating are established with reference to NACE TM 0102-2002.However,those domestic standards have not explained the concept of "anti-corrosion coating resistivity" clearly and there is confusion with terms related to "anti-corrosion coating resistivity".The reasons for selecting the general method and the attenuation method are not defined clearly for the measurement of the resistivity of anti-corrosion coating in various standards,and the test location of the soil resistance is not specified when the general method is used for the directional drilling crossing pipeline,resulting in differences in the field test results and evaluation conclusions of the resistivity of the anti-corrosion coating outside the same pipeline by various inspection units.In order to clarify the above problems,the concepts related to the resistivity of the anti-corrosion coating were explained firstly,and then the meaning of the resistivity of the anti-corrosion coating was clarified through theoretical analysis and formula derivation.Furthermore,the measurement results of the resistivity of the anti-corrosion coating of 100 directional drilling crossing pipelines were statistically analyzed.Finally,suggestions on the revision of relevant standards were given,with expect to revise the unclear problems in the new version of the standards.

Cite this article

ZHONG You-chuan, WU Hong-jun, XIE Jun, CHEN Zhen, WANG Chao, LIU Zhen-jun, SHEN Xing, ZHAO Yong, WANG Zhong-xiang, ZHANG Jin-wei . Problems and Suggestions in the Resistivity Measurement of the External Anti-Corrosion Coating of Buried Steel Pipelines[J]. Materials Protection, 2023 , 56(2) : 157 -163 . DOI: 10.16577/j.issn.1001-1560.2023.0046

References

[1] 胡士信.阴极保护工程手册[M].北京:化学工业出版社,1999.HU S X.Handbook of Cathodic Protection Engineering[M].Beijing: Chemical Industry Press,1999.

[2] 崔 伟.管道穿越段防腐层质量和阴极保护效果评估[J].油气储运,2020,39(11):1 304-1 309.CUI W.Evaluation on quality of anticorrosive coating and effect of cathodic protection for crossing pipeline[J].Oil &Gas Storage and Transportation,2020,39 ( 11 ):1 304-1 309.

[3] 葛艾天,李 伟,杜艳霞,等.定向钻穿越管道防腐蚀层及阴极保护的评价方法[J].腐蚀与防护,2017,38(5):365-368.GEI A T,LI W,DU Y X,et al.Evaluation Methods of Anticorrosion Layer and Cathodic Protection of HDD Pipeline[J].Corrosion & Protection,2017,38(5):365-368.

[4] 滕延平,刘玲莉,陈洪源,等.管道水平定向钻穿越段涂层测试与评价[J].管道技术与设备,2010,17(1):43-45.TENG Y P,LIU L L,CHEN H Y,et al.Coating Quality Test and Evaluation of the Horizontal Directional Drilling Pipeline Sections[J].Pipeline Technique and Equipment,2010,17(1):43-45.

[5] 邱昌容,曹晓珑.电气绝缘测试技术[M].北京:机械工业出版社,2002.QIU C R,CAO X L.Electrical insulation testing technology[M].Beijing: China Machine Press,2002.

[6] SY/T 0315-2013,钢质管道熔结环氧粉末外涂层技术规范[S].SY/T 0315-2013,Technological specification of external fusion bonded epoxy coating for steel pipeline[S].

[7] GB/T 23257-2017,埋地钢质管道聚乙烯防腐层[S].GB/T 23257-2017,Polyethylene coating for buried steel pipeline[S].

[8] SY/T 6854-2012,埋地钢质管道液体环氧外防腐层技术标准[S].SY/T 6854-2012,Technical standard of liquid epoxy external coating for buried steel pipeline[S].

[9] SY/T 5918-2011,埋地钢质管道外防腐层保温层修复技术规范[S].SY/T 5918-2011,Specification for external coating rehabilitation of buried steel pipeline[S].

[10] GB 50424-2015,油气输送管道穿越工程施工规范[S].GB 50424-2015,Code for construction of oil and gas transmission pipeline crossing engineering[S].

[11] SY/T 0516-2016,绝缘接头与绝缘法兰技术规范[S].SY/T 0516-2016,Technical code for insulating joint and insulating flange[S].

[12] 张 勇,翁永基.由阴极保护测量参数评价管道覆盖层质量[J].油气储运,1999,18(2):53-53.ZHANG Y,WENG Y J.Evaluation of Pipeline Coating Quality by In-Site Measured Characteristics of Cathodic Protection[J].Oil & Gas Storage and Transportation,1999,18(2):53-53.

[13] GB/T 19285-2014,埋地钢质管道腐蚀防护工程检验[S].GB/T 19285-2014,Inspection of corrosion protection for buried steel pipelines[S].

[14] GB/T 21246-2007,埋地钢质管道阴极保护参数测量方法[S].GB/T 21246-2007,Measurement method for cathodic protection parameters of buried steel pipelines[S].

[15] SY/T 0036-2000,埋地钢质管道强制电流阴极保护设计规范[S].SY/T 0036-2000,Design specification of impressed current cathodic protection for buried steel pipeline[S].

[16] DEC-OGP-G-AC-005-2020-1,埋地钢质管道液体聚氨酯补口防腐层技术规定[S].DEC-OGP-G-AC-005-2020-1,Specification of liquid polyurethane joint coatings for steel Pipeline[S].

[17] ISO 15589-1-2015,石化与天然气工业—管道系统阴极保护—第1 部分:陆上管线[S].ISO 15589-1-2015,Petroleum,petrochemical and natural gas industries - Cathodic protection of pipeline systems -Part 1: On land pipelines[S].

[18] NACE TM 0102-2002,Measurement of Protective Coating Electrical Conductance on Underground Pipelines[S].

[19] DIN 30670-2012,Polyethylene coatings on steel pipes and fittings Requirements and testing[S].

[20] 唐明华.油气管道阴极保护[M].北京:石油工业出版社,1986.TANG M H.Cathodic protection for oil and gas pipelines[M].Beijing: Petroleum Industry Press,1986.

[21] 苑绍成.变频选频法—地下管道防腐层质量检测技术[J].管道技术与设备,1999(4):36-38.YUAN S C.Frequency conversion frequency selection method - quality inspection technology of anti-corrosion layer of underground pipelines[J].Piping technology and equipment,1999(4):36-38.

[22] 董宝山.变频-选频技术在防腐层检测中的应用[J].石油规划设计,2002,13(1):38-39.DONG B S.Application of frequency conversion-frequency selection technology in anti-corrosion layer detection[J].Oil Planning and Design,2002,13(1):38-39.

[23] 陈 宏,梁成浩,李海田.变频选频法检测和评价钢质燃气管网腐蚀损坏[J].石油化工腐蚀与防护,2002,19(4):53-56.CHEN H,LIANG C H,LI H T.Variable Frequency and Frequency Modulation Technique and Evaluation of Corrosion Failure of Steel Gas Pipelines[J].Petrochemical Corrosion and Protection,2002,19(4):53-56.

[24] 刘安琪,王 睿,蒋季洪,等.PCM 法防腐层检测评级参数选取研究[J].石油化工自动化,2009(1):40-42.LIU A Q,WANG R,JIANG J H,et al.Research for the Parameters Selection in the Anti-corrosion Layer Evaluation by PCM Method[J].Automation in Petro-Chemical Industry,2009(1):40-42.

[25] LIU B,QIAN C W,GAO Q,et al.The evaluation methodology of pipeline coatings based on AC current attenuation survey: International Conference on Pipelines and Trenchless Technology (ICPTT)2009[C].Reston: American Society of Civil Engineers,2009.

[26] 徐华天,杨 威,温玉芬,等.定向钻穿越管道阴极保护数值模拟评价方法[J].装备环境工程,2020,17(11):41-46.XU H T,YANG W,WEN Y F,et al.Numerical simulation method for cathodic protection evaluation of HDD pipeline[J].Equipment Environmental Engineering,2020,17(11):41-46.

[27] 蔡光义,张德平,赵苇杭,等.有机涂层防护性能与失效评价研究进展[J].腐蚀与防护,2017,38(9):657-664.CAI G Y,ZHANG D P,ZHAO W H,et al.Research advances of protective performance and failure evaluation for organic coatings[J].Corrosion & Protection,2017,38(9):657-664.

[28] CAI G,WANG H,JIANG D,et al.Impedance sensor for the early failure diagnosis of organic coatings[J].Coat Technol Res,2018,55(1): 1 259-1 272.

[29] POPE R.Attenuation of Forced Drainage Effects on Long Uniform Structures[J].Corrosion,1946,2(6):307-319.

[30] ROGERS W F,DAVIS B H,SHEPPARD L.A Proposed Standard Method for Measuring the Electrical Resistance of Pipe Line Coatings[J].Corrosion,1951,7(7):245-251.

[31] HUDDLESTON W E.Tentative Standard Method for Measuring Electrical Conductance of Coating On Buried Pipe Lines[J].Corrosion,1955,11(2):59-62.

[32] PARKER M E.Methods for Measuring Leakage Conductance of Coating On Buried or Submerged Pipe Lines[J].Corrosion,1957,13 (12): 37-39.

[33] GUMMOW R A,SEGALL S M,WAKELIN R G.Coating Quality Testing of Directionally Drilled Pipe Sections:International Annual Conference & Exposition[C].Orlando:NACE International,2000

[34] 窦宏强,马晓成,郭娟丽,等.水平定向钻穿越管道防腐蚀层质量评价方法的研究现状[J].腐蚀与防护,2020,41(8):56-60.DOU H Q,MAI X C,GUO J L,et al.Research Status of Evaluating Method for Anti - Corrosion Coating Quality of Horizontal Directional Drilling Through Pipeline[J].Corrosion & Protection,2020,41(8):56-60.

[35] 张国虎,龚 敏,唐 强,等.用电化学方法研究X80 管线钢的阴极保护参数[J].腐蚀与防护,2011,32(11):868-883.ZHANG G H,GONG M,TANG Q,et al.Electrochemical study on cathodic protection parameters of X80 pipeline steels[J].Corrosion & Protection,2011,32 (11):868-883.

Outlines

/