Today is Email Alert  RSS

Analysis on Electrical Properties of Cold Sprayed Copper Coating on Static Electrical Contact Surface of High Voltage Switch

Expand
  • Pinggao Group Co.,Ltd.,Pingdingshan 467001,China

Received date: 2022-08-23

  Revised date: 2022-09-15

  Accepted date: 2022-10-20

  Online published: 2023-08-11

Abstract

 In order to verify the feasibility of replacing silver layer with cold sprayed copper coating on the static electrical contact surface of high voltage switch,an electronic universal testing machine was used to apply certain pressure on the test samples with surface treatments of silver plating and cold sprayed copper coating,and the contact resistance of such samples was measured by micro-resistance tester,the influence of different surface treatments on the contact resistance of samples was analyzed,and then the temperature rise test of conductors with two different surface treatments was carried out on 252 kV GIL prototype.Results showed that the contact resistance of electrical contact surface with cold sprayed copper coating was lower,and the temperature rise value obtained from the temperature rise test was also lower than that of silver plated electric contact surface,indicating that the cold sprayed copper coating can replace the silver plating treatment on the electrostatic contact surface and reduce the manufacturing cost of high-voltage switch.

Cite this article

XU Dong-jie, LI Xin-gang, LI Kai, XU Zhong-xun, WANG Hong-chao, LI Xiao-guang, Si Xiao-chuang, CHEN Rui . Analysis on Electrical Properties of Cold Sprayed Copper Coating on Static Electrical Contact Surface of High Voltage Switch[J]. Materials Protection, 2023 , 56(2) : 175 -178 . DOI: 10.16577/j.issn.1001-1560.2023.0049

References

[1] 徐雪霞,冯砚厅,柯 浩,等.高压隔离开关触头镀银层质量检测分析[J].河北电力技术,2013,32(3):3-5.XU X X,FENG Y T,KE H,et al.Analsysis on Silver Coating Quality Inspection for High Voltage Switch Finger[J].Hebei Electric Power,2013,32(3):3-5.

[2] 武 佳,曹伟产,徐 曦,等.高压气体断路器压气缸电镀银仿真研究[J].电镀与涂饰,2021,40(7): 516-524.WU J,CAO W C,XU X,et al.Simulation study of silver electroplating on pressure cylinder of high - voltage circuit breaker[J].Electroplating & Finishing,2021,40(7):516-524.

[3] 刘建军,杨庆旭.高压开关设备镀银层硬度检测技术介绍[J].江苏电机工程,2010,29(6):83-84.LIU J J,YANG Q X.Introduction of the hardness testing technology for silver plating layer of high-voltage switchgear[J].Jiangsu Electrical Engineering,2010,29(6):83-84.

[4] 曾领才,文 伟,李 德.纳米粉体复合镀银合金在高压开关电接触部位上的应用[J].电镀与涂饰,2009,28(5):20-22.ZENG L C,WEN W,LI D.Application of electroplated silver alloy/nanoparticle composites to electrical contact of high-voltage switch[J].Electroplating & Finishing,2009,28(5):20-22.

[5] 江胜波,李 宾.2A12 铝合金冷喷铜涂层的组织与性能[J].电镀与精饰,2017,39(3):9-12.JIANG S B,LI B.Microstructure and Property of Cold Sprayed Copper Coatings on 2A12 Aluminium Alloy[J].Plating & Finishing,2017,39(3):9-12.

[6] 胡凯玮,李文亚,杨夏炜,等.铝合金表面冷喷涂铜涂层研究[J].精密成形工程,2019,11(6):154-160.HU K W,LI W Y,YANG X W,et al.Cold Spray Copper Coating on Aluminum Alloy Substrate[J].Journal of Netshape Forming Engineering,2019,1(6):154-160.

[7] 杨林鹏,李增权.高压电气铝合金开关冷喷涂铜涂层性能研 究[J].特 种 铸 造 及 有 色 合 金,2016,36 (9):1 000-1 002.YANG L P,LI Z Q.Properties of Cold Sprayed Copper Coatings on High-Voltage Electrical Aluminum Alloy Switches[J].Special Casting & Nonferrous Alloys,2016,36(9): 1 000 -1 002.

[8] 郭辉华,周香林,巫湘坤,等.几种金属基板上冷喷涂铜涂层的试验与模拟[J].材料热处理学报,2009,30(6):158-163.GUO H H,ZHOU X L,WU X K,et al.Preparation and simulation of cold sprayed copper coatings on metal substrate[J].Transactions of Materials and Heat Treatment,2009,30(6): 158-163.

[9] 徐玲玲,周香林,孙澄川,等.冷喷涂导热导电铜涂层的制备与研究[J].热喷涂技术,2017,9(4): 7-12.XU L L,ZHOU X L,SUN C C,et al.Preparation and Study of Copper Coating by Cold Spray Technology on Electric Conduction and Thermal Conductivity [J].Thermal Spray Technology,2017,9(4):7-12.

[10] 郭凤仪,陈忠华.电接触理论及其应用技术[M].北京:中国电力出版社,2008.GUO F Y,CHEN Z H.Electric Contact Theory and Its Application Technology[M].Beijing: China Electric Power Press,2008.

[11] 张森林.GIS 接触电阻与温升关系研究[D].保定:华北电力大学,2015.ZHANG S L.Study on the relatio nship between contact resistance and tem peratu re rise of GIS[D].Baoding: North China Electric Power University,2015.

[12] 李玉杰,李洪涛,高 山,等.GW6B-252 型隔离开关触头温升与接触状态关系研究[J].电力工程技术,2018,37(4): 121-125.LI Y J,LI H T,GAO S,et al.The Relationship between Contact Temperature and Temperature Rise of GW6B-252 Isolation Switch[J].Electrical Engineering,2018,37(4):121-125.

[13] 任万滨,支宏旭,付颖华,等.铆钉电触头接触温升与接触电阻特性研究[J].电器与能效管理技术,2015(4):7-11.REN W B,ZHI H X,FU Y H,et al.Research on temperature rise and contact resistance of rivets contacts[J].Electrical & Energy Management Technology,2015(4):7-11.

[14] 王塞北,彭明军,孙 勇.金属触头电接触性能研究进展[J].材料导报,2020,34(9):9 117-9 123.WANG S B,PENG M J,SUN Y,et al.Research Progress on Electrical Contact Performance of Metal Contacts[J].Materials Reports,2020,34(9): 9 117-9 123.

[15] 袁名扬,王 浩.触头接触电阻影响因素的研究[J].机电元件,2017,34(7):37-39.YUAN M Y,WANG H.Research on the Affecting Factors of Contact Resistance[J].Electromechanical Components,2017,34(7): 37-39.

[16] 柏小平,李国伟,翁 桅,等.电触头表面状态对接触电阻的影响和改善方法[J].电工材料,2013(1):10-15.BAI X P,LI G W,WENG W,et al.Effects of Contact Surface Condition On Contact Resistance and Improving Methods[J].Electrical Engineering Materials,2013(1):10-15.

Outlines

/