Today is Email Alert  RSS

Study on Tribocorrosion Performance of the (TiNbMoZrW)C Coatings Prepared under Different Bias in Artificial Seawater

Expand
  • College of Materials and Engineering,Chongqing University of Technology,Chongqing 400050,China

Received date: 2023-02-21

  Revised date: 2023-03-12

  Accepted date: 2023-04-15

  Online published: 2023-08-25

Abstract

As a kind of promising candidate materials in the field of corrosion protection,the multi-component carbide coatings have low friction coefficient,low wear rate and good corrosion resistance,but there are few studies on the tribocorrosion performance.In order to promote the application of the multi-component carbide coatings in seawater environment,the (TiNbMoZrW)C coatings were prepared via reactive magnetron sputtering under various pulse bias voltages.The microstructures and the mechanical properties of the (TiNbMoZrW)C coatings were systematically characterized by X-ray diffraction,X-ray photoelectron spectroscopy,atomic force microscope,scanning electron microscope,Vickers indentation and nano-indentation experiment.In addition,the electrochemical characteristics and friction and corrosion properties of coatings in artificial seawater were analyzed.Results showed that the pressure residual stress,hardness and elastic modulus of the prepared (TiNbMoZrW)C coating showed an increasing trend when the pulse bias increased from 0 to -800 V.The (TiNbMoZrW)C coating deposited under -800 V pulse bias had the maximum hardness (25.9 GPa) and the maximum elastic modulus (365.34 GPa),excellent crack and corrosion resistance,which exhibited the lowest wear rate in artificial seawater [1.00×10-7mm3/(N·m)] and air [2.28×10-7mm3/(N·m)].Meanwhile,the application of higher pulse bias was beneficial to improve the tribocorrosion performance of the (TiNbMoZrW)C coatings in artificial seawater.

Cite this article

WU Lixin, LIU Xinyu, WANG Junjun . Study on Tribocorrosion Performance of the (TiNbMoZrW)C Coatings Prepared under Different Bias in Artificial Seawater[J]. Materials Protection, 2023 , 56(8) : 18 -27 . DOI: 10.16577/j.issn.1001-1560.2023.0182

References

[1] CANTOR B,CHANG I T H,KNIGHT P,et al.Microstructural development in equiatomic multicomponent alloys [J].Materials Science and Engineering: A,2004,375-377:213-218.

[2] YEH J W,CHEN S K,LIN S J,et al.Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes [J].Advanced Engineering Materials,2004,6(5): 299-303.

[3] KAO W H,SU Y L,HORNG J H,et al.Mechanical,tribological,anti-corrosion and anti-glass sticking properties of high-entropy TaNbSiZrCr carbide coatings prepared using radio-frequency magnetron sputtering [J].Materials Chemistry and Physics,2021,268: 124741.

[4] CHEN S,CAI Z,LU Z,et al.Tribo-corrosion behavior of VAlTiCrCu high-entropy alloy film [J].Materials Characterization,2019,157: 109887.

[5] MALINOVSKIS P,FRITZE S,RIEKEHR L,et al.Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance [J].Materials and Design,2018,149: 51-62.

[6] LI W,LIU P,LIAW P K.Microstructures and properties of high-entropy alloy films and coatings: a review [J].Materials Research Letters,2018,6(4): 199-229.

[7] YU X,WANG J,WANG L,et al.Fabrication and characterization of CrNbSiTiZr high-entropy alloy films by radiofrequency magnetron sputtering via tuning substrate bias[J].Surface and Coatings Technology,2021,412:127074.

[8] WANG J,ZHANG H,YU X,et al.Insight into the structure and tribological and corrosion performance of high entropy(CrNbSiTiZr)C films:First-principles and experimental study[J].Surface and Coatings Technology,2021,421:127468.

[9] OSES C,TOHER C,CURTAROLO S.High-entropy ceramics [J].Nature Reviews Materials,2020,5(4):295-309.

[10] ZHANG J,SU X,SHAN L,et al.Preparation and tribocorrosion performance of CrCN coatings in artificial seawater on different substrates with different bias voltages [J].Ceramics International,2019,45(8): 9 901-9 911.

[11] WANG Y,LI J,DANG C,et al.Influence of bias voltage on structure and tribocorrosion properties of TiSiCN coating in artificial seawater [J].Materials Characterization,2017,127: 198-208.

[12] YE Y,JIANG Z,ZOU Y,et al.Enhanced anti-wear property of VCN coating in seawater with the optimization of bias voltage [J].Ceramics International,2020,46(6):7 939-7 946.

[13] TAIT R N,SMY T,BRETT M J.Structural anisotropy in oblique incidence thin metal films [J].Journal of Vacuum Science and Technology A Vacuum Surfaces and Films,1992,10(4): 1 518-1 521.

[14] MATTOX D.Particle bombardment effects on thin-film deposition: A review [J].Journal of Vacuum Science and Technology A: Vacuum,Surfaces and Films,1989,7(3):1 105-1 114.

[15] XU Y,LI G,LI G,et al.Effect of bias voltage on the growth of super-hard (AlCrTiVZr)N high-entropy alloy nitride films synthesized by high power impulse magnetron sputtering [J].Applied Surface Science,2021,564: 150417.

[16] PELLEG J,ZEVIN L Z,LUNGO S,et al.Reactive-sputterdeposited TiN films on glass substrates [J].Thin Solid Films,1991,197(1/2): 117-128.

[17] HU Y,ZHU J,ZHANG C,et al.Understanding the Preferred Crystal Orientation of Sputtered Silver in Ar/N2Atmosphere: A Microstructure Investigation [J].Advances in Materials Science and Engineering,2019,2019: 3079393.

[18] LEE J W,TIEN S K,KUO Y C.The effects of pulse frequency and substrate bias to the mechanical properties of CrN coatings deposited by pulsed DC magnetron sputtering[J].Thin Solid Films,2006,494(1): 161-167.

[19] LO W L,HSU S Y,LIN Y C,et al.Improvement of high entropy alloy nitride coatings (AlCrNbSiTiMo)N on mechanical and high temperature tribological properties by tuning substrate bias [J].Surface and Coatings Technology,2020,401: 126247.

[20] BRAIC V,VLADESCU A,BALACEANU M,et al.Nanostructured multi - element (TiZrNbHfTa)N and(TiZrNbHfTa)C hard coatings [J].Surface and Coatings Technology,2012,211: 117-121.

[21] BALACEANU M,BRAIC M,BRAIC V,et al.Surface chemistry of plasma deposited ZrC hard coatings [J].Journal of Optoelectronics and Advanced Materials,2005,7(5): 2 557-2 560.

[22] DARLINSKI A,HALBRITTER J.Angle-resolved XPS studies of oxides at NbN,NbC,and Nb surfaces [J].Surface and Interface Analysis,1987,10(5): 223-237.

[23] MANI A,AUBERT P,MERCIER F,et al.Effects of residual stress on the mechanical and structural properties of TiC thin films grown by RF sputtering [J].Surface and Coatings Technology,2005,194(2): 190-195.

[24] KUANG S,WANG J,WANG L,et al.Improvement of the mechanical and the tribological properties of CrNbTiMoZr coatings through the incorporation of carbon and the adjustment of the substrate bias voltage [J].Surface and Coatings Technology,2021,412: 127064.

[25] LEYLAND A,MATTHEWS A.On the significance of the H/E ratio in wear control:a nanocomposite coating approach to optimised tribological behaviour [J].Wear,2000,246(1): 1-11.

[26] WANG Q,FEI Z,YAN J.Evaluating mechanical properties and crack resistance of CrN,CrTiN,CrAlN and CrTiAlN coatings by nanoindentation and scratch tests [J].Surface and Coatings Technology,2016,285: 203-213.

[27] ZHANG T,LIU H,HAO J,et al.Evaluation of Microhardness,Tribological Properties,and Corrosion Resistance of CrFeNiNbTi High-Entropy Alloy Coating Deposited by Laser Cladding [J].Journal of Materials Engineering and Performance,2021,30(12): 9 245-9 255.

[28] WANG W R,QI W,ZHANG X L,et al.Superior corrosion resistance - dependent laser energy density in(CoCrFeNi)(95)Nb-5 high entropy alloy coating fabricated by laser cladding [J].International Journal of Minerals Metallurgy and Materials,2021,28(5): 888-897.

[29] FU Y,ZHOU F,ZHANG M,et al.Structural,mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater [J].Applied Surface Science,2020,525: 146629.

[30] STERN M,GEARY A L.Electrochemical Polarization I.A Theoretical Analysis of the Shape of Polarization Curves[J].Journal of The Electrochemical Society,1957,104(1): 56-63.

[31] NOZAWA K,ARAMAKI K.One-and two-dimensional polymer films ofmodified alkanethiol monolayers for preventing iron fromcorrosion [J].Corrosion Science,1999,41(1):57-73.

[32] ALVI S,AKHTAR F.High temperature tribology of CuMoTaWV high entropy alloy [J].Wear,2019,426: 412-419.

[33] LUGSCHEIDER E,KNOTEK O,BOBZIN K,et al.Tribological properties,phase generation and high temperature phase stability of tungsten- and vanadium-oxides deposited by reactive MSIP-PVD process for innovative lubrication applications [J].Surface and Coatings Technology,2000,133: 362-368.

[34] FU Y,ZHOU F,ZHANG M.The enhancement of individual friction and corrosion properties of CrSiN coatings by Mo doping in seawater [J].Surface and Coatings Technology,2022,432: 128069.
Outlines

/