Today is Email Alert  RSS

Research Progress on Tribology of Sliding Plate Materials for Bridge Bearings

Expand
  • (1.National Key Laboratory of Bridge Intelligent and Green Construction, Wuhan 430034, China;2.State Key Laboratory of Special Surface Protection Materials and Application Technology,Wuhan Research Institute of Materials Protection Co., Ltd.CAM, Wuhan 430030, China)

Received date: 2023-06-09

  Revised date: 2023-07-12

  Accepted date: 2023-08-15

  Online published: 2023-09-15

Abstract

The sliding plate material of bridge bearing is the key part to realize the bearing, sliding and rotation of bridge bearing.This paper expounded the structure and working condition characteristics of sliding plate for bridge bearing, introduced the influence of different extreme environments on the service life and tribological properties of bridge bearing materials, summarized the research status and development trends of polytetrafluoroethylene, ultra-high molecular weight polyethylene and other typical sliding plate materials for bridge bearing, and compared their similarities and differences.On this basis, the future development trend of tribological properties of sliding plate materials for bridge bearing was analyzed.

Cite this article

ZHAN Shengpeng, LI Ruize, MA Changfei, JIA Dan, DUAN Haitao, JING Guoqiang, MA Lixin, YANG Tian, LI Xiaojing . Research Progress on Tribology of Sliding Plate Materials for Bridge Bearings[J]. Materials Protection, 2023 , 56(9) : 11 -21 . DOI: 10.16577/j.issn.1001-1560.2023.0207

References

[1] 中共中央.国务院印发《交通强国建设纲要》[J].中华人民共和国国务院公报,2019(28):5-10.The Central Committee of the Communist Party of China.The State Council Issued the Outline of Building a Transport Power [J].Gazette of the State Council of the People's Republic of China, 2019(28):5-10.

[2] 中共中央.国务院印发《国家综合立体交通网规划纲要》[J].中华人民共和国国务院公报,2021(8):25-37.The Central Committee of the Communist Party of China.The State Council Issued the Outline of the National Comprehensive Three Dimensional Transportation Network Plan[J].Gazette of the State Council of the People's Republic of China, 2021 (8): 25-37.

[3] 王 帅.隔震桥梁数值模拟及振动台试验研究[D].广州:广州大学, 2012.WANG S.Isolation bridge numerical simulation and shaking table research [D].Guangzhou: Guangzhou University,2012.

[4] 黄 俊.桥梁支座类型及其应用[J].科技促进发展,2010(增刊1): 248-249.HUANG J.Bridge bearing type and its application [J].Science & Technology for Development,2010 (S1):248-249.

[5] 鲍 薇, 高静青.球型钢支座的设计研究与思考[J].铁道勘察, 2012, 38(3): 68-71.BAO W, GAO J Q.Research and thought of GTQZ design[J].Railway Investigation and Surveying, 2012, 38(3):68-71.

[6] 刘小方, 白午龙, 段昕智, 等.球钢支座的摩擦副材料性能及测试方法比较[J].城市道桥与防洪, 2022(1):86-88.LIU X F, BAI W L, DUAN X Z, et al.Comparison of friction pair material properties and test methods of ball steel bearing [J].Urban Roads Bridges & Flood Control , 2022(1): 86-88.

[7] 崔海军.桥梁滑移减隔震支座力学性能分析[J].四川水泥, 2022(8): 225-226.CUI H J.Mechanical performance analysis of sliding isolation bearing of bridge [J].Sichuan Cement, 2022 (8):225-226.

[8] SAADATNIA M,RIAHI T,IZADINIA M.International journal of steel structures hysteretic behavior of rubber bearing with yielding shear devices [J].International Journal of Steel Structures, 2019(19):747-759.

[9] 田岳松,吴辉琴,胡 强,等.板式橡胶支座的智能化研究[J].广西科技大学学报, 2021, 32(4): 65-70.TIAN Y S,WU H Q,HU Q,et al.Research on intelligentization of plate rubber bearing[J].Journal of Guangxi University of Science and Technology, 2021,32(4):65-70.

[10] 高 军, 林 晓.大跨度斜拉桥摩擦摆式支座减震性能分析[J].桥梁建设, 2020, 50(2): 55-60.GAO J, LIN X.Analysis of damping performance of frictional pendulum bearings in long-span cable-stayed bridge[J].Bridge Construction, 2020, 50(2): 55-60.

[11] 张颖周, 夏修身, 韦性涵.梁式桥板式橡胶支座的合理计算模型研究[J].世界桥梁, 2017, 45(4): 56-60.ZHANG Y Z, XIA X S, WEI X H.Study of rational calculation model for beam bridge with laminated rubber bearings[J].World Bridges, 2017, 45(4): 56-60.

[12] 李建中, 汤 虎, 管仲国.中小跨径板式橡胶支座梁桥新型隔震系统[J].中国公路学报, 2015, 28(3):35-43.LI J Z, TANG H, GUAN Z G.A new lsolation system for small and medium span bridges on laminated rubber bearings[J].China Journal of Highway and Transport, 2015, 28(3): 35-43.

[13] 汤 虎, 李建中.地震动特性对公路桥梁板式橡胶支座滑动反应影响[J].工程力学, 2013, 30(10): 154-161.TANG H, LI J Z.Effect of ground motion characteristics on sliding response of flastomeric pad bearings in highway bridges [J].Engineering Mechanics, 2013, 30 (10):154-161.

[14] 吴 刚,王克海,李 冲,等.板式橡胶支座摩擦滑移特性参数分析[J].土木工程学报, 2014, 47(增刊1):108-112.WU G, WANG K H, LI C, et al.Parametric finite element investigation of laminated rubber bearings with friction slipping [J].China Civil Engineering Journal, 2014, 47(S1):108-112.

[15] 王 怡, 陶庆东, 罗丹霞.基于实际桥梁工程的板式橡胶支座的设计研究[J].四川建材, 2022, 48(7):108-109.WANG Y, TAO Q D, LUO D X.Design and research of plate rubber bearing based on actual bridge engineering [J].Sichuan Building Materials, 2022, 48(7): 108-109.

[16] 杜新龙,虞庐松,王 力,等.极端温度对板式橡胶支座连续梁桥地震响应影响研究[J].中国安全生产科学技术, 2022, 18(10): 210-215.DU X L, YU L S, WANG L, et al.Study on influence of extreme temperature on seismic response of continuous girder bridge with laminated rubber bearing [J].Journal of Safety Science and Technology, 2022, 18(10): 210-215.

[17] 张颖周.新型桥梁支座力学性能试验研究[D].兰州: 兰州交通大学, 2018.ZHANG Y Z.Experimental study on mechanical properties of new bridge bearing [D].Lanzhou:Lanzhou Jiaotong University, 2018.

[18] 白文阳.转体球铰支座受力分析研究[J].河南科技,2022, 41(2): 35-38.BAI W Y.Analysis on bearing force of swivel spherical hinge support [J].Henan Science and Technology, 2022,41(2): 35-38.

[19] 蒋建军, 蒋劲松.西部地震区高墩桥梁支座合理选型研究[J].公路, 2007(11): 27-31.JIANG J J,JIANG J S.Design of Tunnel-Type Anchorage of Suspension Bridge [J].Highway, 2007(11): 27-31.

[20] 蒙明俊, 陈文强, 龚文剑.山区高速公路桥梁球型支座的应用[J].黑龙江交通科技, 2020, 43(10): 100-101.MENG M J,CHEN W Q,GONG W J.Application of bridge spherical bearing in mountainous expressway [J].Communications Science and Technology Heilongjiang, 2020, 43(10): 100-101.

[21] FUJITA T, ISHIDA K, MAZDA T, et al.Study for the prediction of the long-term durability of seismic isolators [J].Rubber World, 1994(211):3.

[22] URUTA H, YAMAZAKI T, OHSIMA T, et al.Experiments and numerical ananlysis on response of internal temperature of high damping rubber bridge bearing under low temperature[J].Doboku Gakkai Ronbunshu, 2004 (773):113-123.

[23] 王广业.一种盆式支座新型耐腐蚀方法[J].新型工业化, 2022, 12(1): 249-250.WANG G Y.A new corrosion resistant method for basin bearing [J].The Journal of New Industrialization,2022,12(1): 249-250.

[24] 陈彦北,孔令俊,张振兴,等.耐磨板对球型支座受力性能的影响[J].铁道建筑, 2012 (7): 13-16.CHEN Y B, KONG L J, ZHANG Z X, et al.Influence of anti-friction plate on force-bearing performance of spherical bearing [J].Railway Engineering, 2012 (7): 13-16.

[25] 徐智刚.铁路桥梁病害检测及分析研究[D].兰州:兰州交通大学, 2018.XU Z G.Research on disease detection and analysis of railroad bridge [D].Lanzhou:Lanzhou Jiaotong University,2018.

[26] 庾光忠,夏俊勇,刘 羽,等.沙尘侵入对铁路桥梁支座摩擦因数的影响试验研究[J].铁道建筑, 2019, 59(12): 16-18.YU G Z, XIA J Y, LIU Y, et al.Experimental study on influence of sand-dust intrusion on friction coefficient of railway bridge bearing [J].Railway Engineering, 2019, 59(12): 16-18.

[27] 刘 炼.三种典型工程塑料老化行为与摩擦学性能研究[D].北京:机械科学研究总院, 2022.LIU L.Study on aging behavior and tribological properties of three typical engineering plastics [D].Beijing: China Academy of Machinery Science and Technology Group, 2022.

[28] 朱长岭,陈 跃,杜三明, 等.摩擦热对PTFE 复合材料高速摩擦学性能的影响[C]/ /2011 年全国青年摩擦学与表面工程学术会议论文集.北京:中国机械工程学会摩擦学分会青年工作委员会, 2011:42-45.ZHU C L, CHEN Y, DU S M, et al.Effect of friction heat on high-speed tribological properties of PTFE composites[C]/ /Proceedings of 2011 National Youth Tribology and Surface Engineering Conference.Beijing: Youth Working Committee of Tribology Branch of China Society of Mechanical Engineering.2011: 42-45.

[29] 江 波, 周倩倩, 朱爱萍, 等.埃洛石-玻纤/聚四氟乙烯复合材料的摩擦磨损热膨胀及力学性能[J].复合材料学报, 2016, 33(9): 1 999-2 005.JIANG B, ZHOU Q Q, ZHU A P, et al.Friction wear thermal expansion and mechanical properties of halloysite-glass fiber/polytetrafluoroethylene composite.[J].Acta Materiae Compositae Sinica, 2016, 33(9): 1 999-2 005.

[30] 王立虎,张启玉,王守仁,等.用于高铁桥梁支座滑板的Go/CF/PTFE 复合材料摩擦学特性研究[J].热加工工艺, 2018, 47(8): 1-6.WANG L H, ZHANG Q Y, WANG S R, et al.Research on tribological properties of Go/CF/PTFE composite used in sliding broad of bridge bearing in high speed railway [J].Hot Working Technology, 2018, 47(8): 1-6.

[31] SAWYER W G,FREUDENBERG K D,BHIMARA P,et al.A study on the friction and wear behavior of PTFE filled with alumina nanoparticles [J].Wear, 2003, 254 (5/6):573-580.

[32] VISHAL K, RAJKUMAR K, SABARINATHAN P.Effect of Recovered Silicon Filler Inclusion on Mechanical and Tribological Properties of Polytetrafluoroethylene (PTFE) Composite [J].Silicon, 2022, 14(9): 4 601-4 610.

[33] 王立虎.高铁桥梁球型支座摩擦学设计研究[D].济南:济南大学, 2018.WANG L H.The tribological property design and study of high-speed railway bridge isolation spherical bearings [D].Jinan: University of Jinan, 2018.

[34] HAN Y,ZHENG B,CHEN J H,et al.Study on the reinforcing effect of nano-SiO2 filled PTFE composites [J].AIP Adv, 2019, 9(5): 005217.

[35] 郭永信, 周红成, 汪 磊.h-BN/Si3N4增强聚四氟乙烯复合涂层的摩擦磨损性能[J].塑料, 2022, 51(5):71-75.GUO Y X, ZHOU H C, WANG L.Friction and wear property of polytetrafluoroethylene composite coating reinforced with h-BN/Si3N4[J].Plastics, 2022, 51(5): 71-75.

[36] FENG Y, XIONG T R, XU H B, et al.Polyamide-imide reinforced polytetrafluoroethylene nanofiber membranes with enhanced mechanical properties and thermal stabilities [J].Mater Lett, 2016, 182: 59-62.

[37] JIANG H, CHEN L, CHAI S G, et al.Facile fabrication of poly (tetrafluoroethylene)/graphene nanocomposite via electrostatic self-assembly approach [J].Compos Sci Technol,2014, 103: 28-35.

[38] 仵锋锋, 曹 平, 万琳辉.超高分子量聚乙烯的力学性能研究及其应用[J].金属矿山, 2007(11): 135-136.WU F F, CAO P, WAN L H.Study on mechanical properties of UHMWPE and its application [J].Metal Mine,2007(11): 135-136.

[39] 姜稳定,黄安民,朱志勇,等.两款高速铁路桥梁支座滑块的制备及对比研究[J].工程塑料应用, 2009, 37(11): 51-53.JIANG W D, HUANG A M,ZHU Z Y, et al.Prepapation and comparative study of two kinds of sliding blocks for high-speed railway bridge bearings [J].Engineering Plastics Application, 2009, 37(11): 51-53.

[40] 刘 英,刘 萍,陈成泗,等.超高分子量聚乙烯的特性及应用进展[J].国外塑料, 2005(11): 36-40.LIU Y, LIU P, CHEN C S, et al.Characteristic and application progress of UHMWPE [J].World Plastics, 2005(11): 36-40.

[41] 刘 罡,肖利群,叶淑英,等.无机填料改性超高分子量聚乙烯性能研究[J].工程塑料应用, 2009, 37(4):23-26.LIU G,XIAO L Q, YE S Y, et al.Study on the influence of inorgan ic-particle on the characteration of UHMWPE[J].Engineering Plastics Application, 2009, 37(4): 23-26.

[42] 胡 平, 吕荣侠, 展 桥.超高分子量聚乙烯填料改性的研究[J].塑料, 1990(4): 11-16.HU P, LV R X, ZHAN Q.Study of filler modification on UHMWPE [J].Plastic, 1990(4): 11-16.

[43] 康学勤, 孙 智, 杨春敏, 等.纳米和微米Fe2O3颗粒填充UHMWPE 基复合材料的摩擦学性能研究[J].材料开发与应用, 2004(2): 4-6.KANG X Q, SUN Z, YANG C M, et al.Tribological performance of nanon and mcron Fe2 O3 filled UHMWPE composites [J].Development and Application of Materials,2004(2): 4-6.

[44] 雷 毅, 郭建良, 张雁翔.纳米氧化锌填充超高分子量聚乙烯复合材料的摩擦磨损性能研究[J].摩擦学学报,2006(3): 234-237.LEI Y, GUO J L, ZHANG Y X.Friction and wear behavior of nano-ZnO filled UHMWPE composites [J].Tribology,2006(3): 234-237.

[45] 熊传溪, 陈 涛, 董丽杰, 等.高岭土/四针状ZnO 晶须填充UHMWPE 的研究[J].武汉理工大学学报, 2005(2): 1-3.XIONG C X, CHEN T, DONG L J.et al.Study on properties of kaolin/quardrupedal crystal whisker of zinc oxide cofilled UHMWPE [J].Journal of Wuhan University of Technology, 2005 (2): 1-3.

[46] DALAI N, SREEKANTH P S R.UHMWPE/nanodiamond nanocomposites for orthopaedic applications: A novel sandwich configuration based approach [J].J Mech Behav Biomed Mater, 2021, 116:104327.

[47] 曹翔禹.填料改性UHMWPE 复合材料热膨胀与摩擦学性能研究[D].北京:机械科学研究总院, 2022.CAO X Y.Research on Thermal Expansion and Tribological Properties of Filler Modified UHMWPE Composite Materials[D].Beijing: China Academy of Machinery Science and Technology Group, 2022.

[48] 刘玉峰,胡天辉,朱志勇,等.交联体系对超高摩尔质量聚乙烯性能的影响[J].塑料工业, 2017, 45(1):21-24.LIU Y F, HU T H,ZHU Z Y, et al.The influence of crosslinking systems on properties of UHMWPE [J].China Plastics Industry, 2017, 45(1): 21-24.

[49] 黄安民,刘 婷,朱志勇,等.铁路桥梁支座耐磨材料的性能研究与优选应用[J].中国塑料, 2015, 29(11):38-42.HUANG A M, LIU T, ZHU Z Y, et al.Property research and selection of wear-resistant materials for railway bridge bearings [J].China Plastics, 2015, 29(11): 38-42.

[50] 龚国芳, 曲敬信, 杨华勇.高岭土填充改性超高分子量聚乙烯的浆体冲蚀磨损特性[J].摩擦学学报, 2001(4): 266-269.GONG G F, QU J X, YANG H Y.Study on the erosion wear characteristics and mechanisms of UHMWPE /kaolin composites [J].Tribology, 2001(4): 266-269.

[51] TONG J, MA Y H, ARNELL R D, et al.Free abrasive wear behavior of UHMWPE composites filled with wollastonite fibers [J].Compos Pt A-Appl Sci Manuf, 2006, 37(1): 38-45.

[52] SREEKANTH P S R, KANAGARAJ S.Influence of MWCNTs and gamma irradiation on thermal characteristics of medical grade UHMWPE [J].Bull Mat Sci,2014,37(2):347-356.

[53] 李雄彦, 薛素铎, 潘克君.铜基面抗拔摩擦摆支座的力学性能研究[J].振动与冲击, 2013, 32(6): 84-89.LI X Y, XUE S D, PAN K J.Mechanical property of upliftrestraint friction pendulum bearing support with Cu-stainless interfaces [J].Journal of Vibration and Shock, 2013, 32(6): 84-89.

[54] 罗登发, 姜文英, 张晓武.桥梁支座摩擦材料发展与展望[J].材料开发与应用, 2017, 32(5): 95-97.LUO D F,JIANG W Y, ZHANG X W.Development and prospect of friction materials for bridge bearings [J].Development and Application of Materials,2017,32(5):95-97.

Outlines

/