Review of Research on Bionic Coatings Prepared by High-Energy Beams Cladding
Received date: 2023-06-13
Revised date: 2023-07-15
Accepted date: 2023-08-14
Online published: 2023-10-15
Key words: bionic coating; bionic materials; laser cladding; plasma cladding
SUN Boyang, LIU Minghui, ZHANG Shitao, PAN Zhengyang, JIANG Chunxia, LI Wenge, LIU Yanbo, ZHAO Yuantao . Review of Research on Bionic Coatings Prepared by High-Energy Beams Cladding[J]. Materials Protection, 2023 , 56(10) : 56 -66 . DOI: 10.16577/j.issn.1001-1560.2023.0235
[1] WANG Y W, HUANG Y M, YANG L J, et al.Microstructure and property of tungsten carbide particulate reinforced wear resistant coating by TIG cladding[J].International Journal of Refractory Metals and Hard Materials, 2021,100: 105598.
[2] GANVIR A, JAHAGIRDAR A R, MULONE A, et al.Novel utilization of liquid feedstock in high velocity air fuel(HVAF) spraying to deposit solid lubricant reinforced wear resistant coatings[J].Journal of Materials Processing Technology, 2021, 295: 117203.
[3] 楚景慧.镁合金表面石墨烯基涂层的仿生构筑及防护机制研究[D].长春:吉林大学, 2021.CHU J H.Study on Biomimetic Construction and Protection Mechanism of Graphene-Based Coating on Magnesium Alloy[D].Changchun:Jilin University,2021.
[4] ZHU Y, LIU X B, LIU Y F, et al.Development and characterization of Co-Cu/Ti3SiC2 self-lubricating wear resistant composite coatings on Ti6Al4V alloy by laser cladding[J].Surface and Coatings Technology, 2021, 424: 127664.
[5] MAHADE S, Björklund S, GOVINDARAJAN S, et al.Novel wear resistant carbide-laden coatings deposited by powder-suspension hybrid plasma spray: Characterization and testing[J].Surface and Coatings Technology, 2020, 399:126147.
[6] WANG J,ZHANG Y,CUI Y,et al.Numerical investigation of residual stress in plasma sprayed antifriction wear-resistant sealing coatings on GH4169 superalloy substrate[J].Materials Today Communications, 2022, 31: 103595.
[7] 田菁艾.风沙两相流条件下凸条形态混凝土壁面冲蚀磨损机理研究[D].芜湖:安徽工程大学, 2022.TIAN J A.Study on the Erosion-Wear Mechanisms of the Concrete Surfaces with Convex Bars under the Wind-Sand Two-Phase Flow[D].Wuhu: Anhui Polytechnic University,2022.
[8] ARIF Z U, KHALID M Y, UR REHMANE E, et al.A review on laser cladding of high-entropy alloys, their recent trends and potential applications[J].Journal of Manufacturing Processes, 2021, 68: 225-273.
[9] DAS A K.Recent trends in laser cladding and alloying on magnesium alloys: A review[J].Materials Today: Proceedings, 2022, 51: 723-727.
[10] ZHANG Q, WANG Q, HAN B, et al.Comparative studies on microstructure and properties of CoCrFeMnNi high entropy alloy coatings fabricated by high-speed laser cladding and normal laser cladding [J].Journal of Alloys and Compounds, 2023, 947: 169517.
[11] ZHU L D, XUE P S, LAN Q, et al.Recent research and development status of laser cladding: A review [J].Optics & Laser Technology, 2021, 138: 106915.
[12] DAS A K.Effect of rare earth oxide additive in coating deposited by laser cladding: A review[J].Materials Today:Proceedings, 2022, 52: 1 558-1 564.
[13] XU Z Y, YUAN J F, WU M Y, et al.Effect of laser cladding parameters on Inconel 718 coating performance and multi-parameter optimization[J].Optics & Laser Technology, 2023, 158: 108850.
[14] 崔 陈, 朱协彬, 程敬卿,等.等离子熔覆Fe 基/WC-10Co-4Cr 涂层的组织与性能研究[J].表面技术,2022,52(7):1-15.CUI C,ZHU X B,CHEN J Q,et al.Microstructure and properties of Fe-based /WC-10Co-4Cr coatings by plasma Cladding[J].Surface Technology, 2022,52(7):1-15.
[15] 刘治宇, 王振宇, 刘政军,等.等离子弧堆焊WC 增强镍基堆焊层的组织及耐磨性研究[J].热加工工艺, 2023,51(17): 27-31.LIU Z Y,WANG Z Y,LIU Z J,et al.Microstructure and Wear Resistance of Plasma Arc Surfacing WC Reinforced Nickel-Based Surfacing Layer[J].Hot Working Technology,2023,51 (17): 27-31.
[16] XIE F W, HE Y H, YUAN Z R, et al.Microstructure and high-temperature sliding wear performance of Fe-Co-Mo alloy coating fabricated by plasma cladding[J].Surface and Coatings Technology, 2022, 444: 128667.
[17] 柴廷玺, 徐宏彤, 晏丽琴,等.等离子熔覆制备高熵合金涂层耐腐蚀性能的研究进展[J].材料热处理学报,2022, 43(3): 11-20.CHAI T X,XU H T,YAN L Q, Advances in corrosion resistance of high-entrophy alloys coatings prepared by plasma cladding[J].Transactions of Materials and Heat Treatment,2022,43(3):11-20.
[18] AMY W, INL J, WOO R C, et al.Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase[J].Nature Communications, 2019, 10(1):961.
[19] ASKARINEJAD S, CHOSHALI H A, FLAVIN C, et al.Effects of tablet waviness on the mechanical response of architected multilayered materials: modeling and experiment[J].Composite Structures, 2018, 195: 118-125.
[20] 冯伟龙.H13 钢仿生强化层激光熔覆制备工艺研究[D].锦州:辽宁工业大学, 2020.FENG W L.Study on Laser Cladding Preparation Process of H13 Steel Bionic Strengthening Layer[D].Jinzhou: Liaoning University of Technology,2020.
[21] 李高松.镍基合金功能表面耦合仿生激光熔覆工艺及其性能研究[D].锦州:辽宁工业大学, 2019.LI G S.Study on Functional Surface Coupling Bionic Laser Cladding Process and Properties of Nickel - Based Alloys[D].Jinzhou: Liaoning University of Technology,2019.
[22] CHEN Z K, LU S C, SONG X B, et al.Effects of bionic units on the fatigue wear of gray cast iron surface with different shapes and distributions[J].Optics & Laser Technology, 2015, 66: 166-174.
[23] NALEWAY S E, PORTER M M, MCKITTRICK J, et al.Structural Design Elements in Biological Materials: Application to Bioinspiration[J].Advanced Materials, 2015, 27(37): 5 455-5 476.
[24] XIAO Y M, YANG Y Q, WANG D, et al.In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere [J].Composites Part B: Engineering,2023, 253: 110534.
[25] 王鹏翔.高强钢-高氮钢仿生叠合交织结构等离子弧增材工艺与性能研究[D].南京:南京理工大学, 2021.WANG P X.Investigation on plasma arc additive technology and performance of high strength steel and high nitrogen steel bionic laminated interwoven structure[D].Nanjing:Nanjing University of Science & Technology, 2021.
[26] HUANG S M, SUN D Q, XU D S, et al.Microstructures and Properties of NiCrBSi/WC Biomimetic Coatings Prepared by Plasma Spray Welding[J].Journal of Bionic Engineering, 2015, 12(4): 592-603.
[27] 崔有正.球头铣削仿生表面磨损与抗疲劳性能研究[D].哈尔滨:哈尔滨理工大学, 2021.CUI Y Z.Research on Bionic Surface Wear and Fatigue Resistance of Ball End Milling[D].Harbin: Harbin University of Science and Technology,2021.
[28] 张志鑫.CeO2/石墨/CoCrFe 等离子熔覆层制备及其微织构化表面摩擦学性能[D].哈尔滨:哈尔滨工程大学,2021.ZHANG Z X.Preparation of Plasma Cladded CeO2/Graphite/CoCrFe Coatings and Tribological Property of Micro-textured Surface[D].Harbin: Harbin Engineering University,2021.
[29] ZHAN X H, YI P, LIU Y C, et al.Effects of texture spacing and bulges of bionic sinusoidal texture on the adhesion properties and fracture mechanism of plasma-sprayed coatings[J].Surface and Coatings Technology, 2020, 393:125772.
[30] YAO F, FANG L, LI G S.Study on structure and process performance of laser cladding nickel - based coating[J].Journal of Materials Research and Technology, 2021, 13:138-143.
[31] ZHOU H, ZHANG P, SUN N, et al.Wear properties of compact graphite cast iron with bionic units processed by deep laser cladding WC [J].Applied Surface Science,2010, 256(21): 6 413-6 419.
[32] 陈宏志.铜基仿生增摩耐磨表面制备工艺研究[D].青岛:山东科技大学, 2020.CHEN H Z.Study on the Manufacturing Technology of Copper-based Bionic Anti-friction and Wear-resistant Surface[D].Qingdao: Shandong University of Science and Technology, 2020.
[33] WU M Y, ZHAN X H, BU H C, et al.Wear Resistance of Different Bionic Structure Manufactured by Laser Cladding on Ti6Al4V[J].Metals and Materials International, 2021,27: 2 319- 2 327.
[34] 周鸿凯, 皮智敏, 黄志武,等.多尺度WC-Co 金属陶瓷涂层的研究现状[J].热加工工艺,2021,50(6):18-21.ZHOU H K, PI Z M, HUANG Z W, et al.Research Status of Multi-Modal WC-Co Cermet Coatings[J].Hot Working Technology,2021,50(6):18-21.
[35] MA G L, CUI H Z, JIANG D, et al.The evolution of multi and hierarchical carbides and their collaborative wear-resisting effects in CoCrNi/WC composite coatings via laser cladding[J].Materials Today Communications, 2022, 30:103223.
[36] 鲁亚冉.激光熔注多尺度颗粒增强铁基复合材料层耐磨性能研究[D].武汉:华中科技大学, 2019.LU Y R.Study on Wear Resistance of Multi-Scale Particle Reinforced Iron Matrix Composite Layer by Laser Melt Injection[D].Wuhan: Huazhong University of Science & Technology,2019.
[37] 王 熙.合金钢表面仿生梯度陶瓷防护涂层的制备与性能研究[D].长春:吉林大学, 2020.WANG X.Preparation and Properties of Bionic Gradient Ceramic Protective Coating on Alloy Steel Surface[D].Changchun:Jilin University,2020.
[38] JIANG P F, NIE M H, ZONG X M, et al.Microstructure and mechanical properties of TC4/NiTi bionic gradient heterogeneous alloy prepared by multi-wire arc additive manufacturing[J].Materials Science and Engineering: A, 2023,866: 144678.
[39] 沈大臣.Cr12MoV 钢表面激光熔覆Ni/Ni-WC 梯度涂层组织及性能研究[D].重庆:重庆理工大学, 2020.SHEN D C.Microstructure and Properties of Laser Cladding Ni/Ni-WC Gradient Coating on Cr12MoV Steel Surface[D].Chongqing:Chongqing University of Technology,2020.
[40] KUMAR S, MANDAL A, DAS A K.The effect of process parameters and characterization for the laser cladding of cBN based composite clad over the Ti6Al4V alloy[J].Materials Chemistry and Physics, 2022, 288: 126410.
[41] SHI B W, LI T, GUO Z W, et al.Selecting process parameters of crack-free Ni60A alloy coating prepared by coaxial laser cladding[J].Optics & Laser Technology, 2022, 149:107805.
[42] 安学甲.原位生成WC 增强镍基涂层激光熔覆工艺及其数据库研究[D].锦州:辽宁工业大学, 2021.AN X J.Study on Laser Cladding Process of In-Situ WC Reinforced Nickel - Based Coating and Its Database [D].Jinzhou: Liaoning University of Technology,2021.
[43] DENG Z X, LIU D F, LIU G, et al.Numerical simulation study on the formation mechanism of hydroxyapatite-silver gradient bioactive ceramic coatings under wide-band laser cladding[J].Optics & Laser Technology, 2023, 163:109412.
[44] WANG C Y,ZHOU J Z,ZHANG T,et al.Numerical simulation and solidification characteristics for laser cladding of Inconel 718[J].Optics & Laser Technology, 2022, 149:107843.
[45] TAMANNAN, CROUCH R, NAHER S.Progress in numerical simulation of the laser cladding process[J].Optics and Lasers in Engineering, 2019, 122: 151-163.
[46] 吴 涛.基于铁基复合材料激光熔覆多物理场耦合数值仿真[D].南昌:华东交通大学, 2020.WU T.Multi-physics Coupled Numerical Simulation of Lasercladding Based on Iron - based Composites[D].Nanchang: East China Jiaotong University,2020.
[47] HAN X, LI C, CHEN X X, et al.Numerical simulation and experimental study on the composite process of submerged arc cladding and laser cladding[J].Surface and Coatings Technology, 2022, 439: 128432.
[48] 胡肇炜, 李文戈, 吴钱林.激光熔覆原位合成Mo2NiB2的热力学分析及数值模拟[J].材料热处理学报, 2017, 38(5): 166-171.HU Z W,LI W G,WU Q L.Thermodynamic analysis and numerical simulation of Mo2NiB2 prepared in-situ by laser cladding[J].Transactions of Materials and Heat Treatment,2017, 38(5): 166-171.
[49] YI P, ZHAN X H, HE Q K, et al.Influence of laser parameters on graphite morphology in the bonding zone and process optimization in gray cast iron laser cladding[J].Optics & Laser Technology, 2019, 109: 480-487.
[50] 尹相恺.高锰钢基体等离子熔覆工艺优化数值模拟研究[D].青岛:青岛理工大学, 2021.YIN X K.Numerical simulation of Plasma Cladding Process Optimization on High ManganeseSteel substrate[D].Qingdao:Qingdao University of Technology,2021.
[51] ZHAO G P, YUAN Y H, WANG H W, et al.Study on wear properties of 7075 aluminum alloy by laser alloying imitating shell surface structure with different unit spacing[J].Materials Chemistry and Physics, 2023, 297: 127327.
[52] 刘佳明.植物叶片抗疲劳耦元提取与仿生结构设计研究[D].南昌:南昌大学, 2020.LIU J M.Research on Extracting Anti-fatigue Coupling Element and Designing Bionic Structure[D].Nanchang:Nanchang University,2020.
[53] RIQUELME A, RODRIGO P, Escalera-Rodríguez M D,et al.Analysis and optimization of process parameters in Al-SiCp laser cladding[J].Optics and Lasers in Engineering, 2016, 78: 165-173.
[54] 肖 强, 徐 睿.超快激光制备材料表面微纳结构的研究进展[J].中国表面工程, 2020, 33(1): 1-17.XIAO Q,XU R.Research Progress in Surface Micro-Nano Structure of Materials Prepared by Ultrafast Laser[J].China Surface Engineering, 2020, 33(1): 1-17.
[55] 张家俊.人工骨表面微纳结构设计制造及服役性能研究[D].镇江:江苏科技大学, 2021.ZHANG J J.Research on the Design, Manufacture and Service Performance of the Surface Microstructure of Artificial Bone[D].Zhenjiang: Jiangsu University of Science and Technology,2021.
/
〈 |
|
〉 |