Effect of Polyacrylic Acid Additives on Anodic Oxidation Film on Magnesium Alloy

FU Guangyan, CHEN Zhaosu, REN Lei, LIU Huacheng

doi:10.16577/j.issn.1001-1560.2022.0254

Materials Protection >

2022 , Vol. 55 >Issue 9: 109 - 113

DOI: https://doi.org/10.16577/j.issn.1001-1560.2022.0254

Effect of Polyacrylic Acid Additives on Anodic Oxidation Film on Magnesium Alloy

Expand

(School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China)

Received date: 2022-03-21

Revised date: 2022-04-29

Accepted date: 2022-05-17

Online published: 2023-12-23

Fold

Abstract

In order to further improve the corrosion resistance of the anodic oxidation film on magnesium alloy, polyacrylic acid (PAA) was added into the base electrolyte containing sodium hydroxide (NaOH), sodium silicate (Na2SiO3) and terephthalic acid (PTA) as the main components to prepare anodic oxidation film on the surface of AZ91D magnesium alloy. The effects of polyacrylic acid on the morphology, phase composition and corrosion resistance of the anodic oxidation film on magnesium alloy were analyzed by optical microscope, scanning electron microscope (SEM), X - ray diffraction (XRD) and electrochemical analyzer. Results showed that adding polyacrylic acid into the electrolyte during the anodic oxidation of magnesium alloy could increase the oxidation voltage, inhibit arc discharge, reduce the number of micropores on the film, increase the density and thickness of the film, affect the phase composition of the film, and therefore improve the film’s corrosion resistance.

Key words： magnesium alloy; anodic oxidation; PAA; corrosion resistance

Cite this article

FU Guangyan, CHEN Zhaosu, REN Lei, LIU Huacheng . Effect of Polyacrylic Acid Additives on Anodic Oxidation Film on Magnesium Alloy[J]. Materials Protection, 2022 , 55(9) : 109 -113 . DOI: 10.16577/j.issn.1001-1560.2022.0254

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article