Research on Automatic Calibration Flow Methods for Robot Spraying Liquid Damping Glue

SHI Erhu, LIU Pengxiang, SUN Xiaojie, ZHANG Liubin

doi:10.16577/j.issn.1001-1560.2022.0265

Materials Protection >

2022 , Vol. 55 >Issue 9: 185 - 189

DOI: https://doi.org/10.16577/j.issn.1001-1560.2022.0265

Research on Automatic Calibration Flow Methods for Robot Spraying Liquid Damping Glue

Expand

(1. SAIC General Dongyue Motors Corporation Ltd.,Yantai 264006, China;2. Evergrande Henchi New Energy Vehicle Research Institute (Shanghai) Co., Ltd., Shanghai 201600, China)

Received date: 2022-03-29

Revised date: 2022-05-03

Accepted date: 2022-06-02

Online published: 2023-12-23

Fold

Abstract

To solve the problem that the flow of robot spraying liquid damping glue cannot automatically adapt to the actual situation in the process of automobile manufacturing, a relational mapping model between spraying flow and production vehicle serial number was established based on robot Karel program and production big data. By compiling the bottom code program executable by the robot, the functional relationship between the serial number of production vehicle and the proportional coefficient of the original spraying flow value for each vehicle and the monitored flow value was automatically calculated, and the actual spraying flow value for each vehicle was automatically calibrated based on the original process parameters. Finally, automatic flow calibration of robot spraying liquid damping glue was realized. The actual spraying flow of each production vehicle fluctuated up and down around the monitored flow value, and the fluctuation range was controlled within ±3%, which met the requirements of automobile manufacturing regarding the stability of spraying quality.

Key words： automobile manufacturing; robot; spraying; flow; calibration

Cite this article

SHI Erhu, LIU Pengxiang, SUN Xiaojie, ZHANG Liubin . Research on Automatic Calibration Flow Methods for Robot Spraying Liquid Damping Glue[J]. Materials Protection, 2022 , 55(9) : 185 -189 . DOI: 10.16577/j.issn.1001-1560.2022.0265

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article