Research Progress of Inorganic Bonded Solid Lubricant film

QIAO Hong - bin, ZHANG Da - wei, TIAN Xue - mei, JIN Ling

doi:10.16577/j.issn.1001-1560.2022.0022

Materials Protection >

2022 , Vol. 55 >Issue 1: 170 - 177

DOI: https://doi.org/10.16577/j.issn.1001-1560.2022.0022

Research Progress of Inorganic Bonded Solid Lubricant film

Expand

1. 安徽工业大学化学与化工学院； 2. 马鞍山市安工大工业技术研究院高分子与固体润滑研究所

Received date: 2021-07-23

Revised date: 2021-09-22

Accepted date: 2021-10-20

Online published: 2023-12-24

Fold

Abstract

Inorganic adhesive solid lubricant film could significantly reduce both the friction coefficient and the high temperature wear, then improve the transmission efficiency. In this paper, the structural characteristics and comprehensive properties of three types of inorganic binders of silicate, borate and phosphate were analyzed firstly, and then the research progress of phosphate bonded solid lubricant film for hot rolled seamless steel pipe was emphatically discussed. After that, the mechanisms of anti - friction and self - repairing of layered materials, fluorides, soft metals and oxides, inorganic oxygenates and self - healing lubricating additives, were further compared and analyzed. Finally, the development direction of inorganic bonded solid lubricant film was prospected.

Key words： solid lubricant film; phosphate; high temperature; anti - friction

Cite this article

QIAO Hong - bin, ZHANG Da - wei, TIAN Xue - mei, JIN Ling . Research Progress of Inorganic Bonded Solid Lubricant film[J]. Materials Protection, 2022 , 55(1) : 170 -177 . DOI: 10.16577/j.issn.1001-1560.2022.0022

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article