Aiming at the problems such as high temperature shrinkage and discoloration of tin plating on copper-based lead frames, as well as poor resistance to salt water corrosion at room temperature, different electroplating processes were used to analyse the microstructure, phase structure, electrochemical corrosion resistance, and mechanical properties of the coating. Results showed that the sufficient deoxidation and coarsening of copper surface before tin-plating could significantly improve the bonding strength of tin-plating and effectively prevent the tin-shrinkage phenomenon at high temperature. After tin plating, soaking the coating in anti-high-temperature oxidant solution could effectively prevent yellowing at high temperature and improve the corrosion resistance in salt-water.
LIU De-qiang
,
ZHOU Sheng-feng
. Study on High Temperature Resistance and Process of Tin Coating[J]. Materials Protection, 2023
, 56(5)
: 148
-152
.
DOI: 10.16577/j.issn.1001-1560.2023.0118
[1] 吕金梅, 刘宝权, 秦俊虎. 锡材表面发黄抗氧化处理的研究[J]. 金属材料与冶金工程, 2014, 42(5):11-13.
LV J M, LIU B Q, QIN J H. A Study on Anti-oxidation Treatment of Yellow Surface of Tin Materials[J].Metal Materials and Metallurgy Engineering, 2014, 42(5):11-13.
[2] 贺岩峰,孙江燕,赵会然,等.无铅纯锡晶须产生的原因和控制对策[J].电镀与涂饰, 2005, 24(3):44-46.
HE Y F, SUN J Y, ZHAO H R, et al. Study on the Production of Lead-free Pure Tin Whisker and its Control Strategy [J]. Electroplating & Finishing, 2005, 24(3):44-46
[3] 杨一伍,张立军. 半导体封装电镀纯锡回流变色初探[J]. 电镀与环保, 2011, 31(5):48-49.
YANG Y W, ZHANG L J. A preliminary study on refluxing and discoloration of pure tin for semiconductor package plating[J]. Electroplating & Pollution Control, 2011, 31(5):48-49.
[4] 张永夫. 半导体引线脚纯锡电镀去氧化工艺对镀层变色的影响[J]. 电子工业专用设备, 2008, 37(7):1-3.
ZHANG Y H. Effect of Descale Process on Coating Discoloration in Pure Tin Lead-Electroplating[J]. Equipment for Electronic Products Manufacturing, 2008, 37(7):1-3.
[5] 李伟浩, 陆 云, 蔡汉华. 铜面粗化剂RA-100的研制[J]. 印制电路信息, 2007(6):14-18.
LI W H, LU Y, CAI H Y. Development of Copper Roughening Agent[J]. Printed Circuit Information, 2007(6):14-18.
[6] 贺岩峰, 孙江燕, 张 丹. 纯锡电镀中的若干问题:上海电子电镀学术报告会[C].上海: [出版者不详], 2006:47-54.
HE Y F, SUN J Y, ZHANG D. Some problems in pure tin plating process: Shanghai Electronic Electroplating Academic Report[C]. Shanghai:[s.n.],2006:47-54.
[7] 孙红旗, 孙江燕, 贺岩峰. 高速纯锡镀层回流焊变色原因和控制对策[J]. 电镀与涂饰, 2016, 35(15):808-811.
SUN H Q, SUN J Y, HE Y F. Causes for reflow discoloration of pure tin coatings in high-speed electroplating and control countermeasures[J]. Electroplating & Finishing, 2016, 35(15):808-811.
[8] 张永夫. 半导体引线脚纯锡电镀去氧化工艺对镀层变色的影响[J]. 电子工业专用设备, 2008, 37(7):1-3.
ZHANG Y H. Effect of Descale Process on Coating Discoloration in Pure Tin Lead-Electroplating[J]. Equipment for Electronic Products Manufacturing, 2008, 37(7):1-3.
[9] 罗 龚, 王洺浩, 王紫玉, 等. 环保型镀锡板钝化研究进展[J]. 电镀与涂饰, 2015,34(19):1 128-1 132.
LUO G, WANG M H, WANG Z Y, et al. Research progress of environment-friendly passivation of tinplate[J]. Electroplating & Finishing, 2015,34(19):1 128-1 132.
[10] RAGHEB A,KAMEL L A. Anodic behavior and passivation of tin in solutions containing phosphoric acid[J]. Corrosion, 1962, 18(4):153-157.
[11] 戴晓光,周圣丰. Cr12MoV冷作模具钢表面激光熔覆球磨SiC强化Fe-Al涂层研究[J]. 热加工工艺, 2015, 44 (10):170-172.
DAI X G, ZHOU S F. Study on Milled Si C/Fe-Al Coating Produced by Laser Cladding on Cr12MoV Cold-working Die Steel[J]. Hot Working Technology, 2015, 44 (10):170-172.
[12] 张春丽, 周 琦, 赵 平. 电镀镍磷合金工艺初探[J]. 材料保护, 2005, 38(2):31-33.
ZHANG C L, ZHOU Q, ZHAO P. Primary Study on Process of Nickel Phosphorus Alloy Electroplating[J]. Materials Protection, 2005, 38(2):31-33.
[13] 张晓云, 石仲川, 郭孟秋,等. 冷喷涂Zn-Ni复合涂层形貌及性能[J]. 热喷涂技术, 2014, 6(2):6-13.
ZHANG X Y, SHI Z C, GUO M Q, et al. Effect of Pre-treatment and Post-treatment on Properties of Cold Spray Zn-Ni Composite Coating[J]. Thermal Spraying Technology, 2014, 6(2):6-13.
[14] 袁诗璞. 第十三讲──镀层的结合力(一)[J]. 电镀与涂饰, 2009(8):49-51.
YUAN S P. Lecture 13 — Adhesion of Coating (I)[J]. Electroplating & Finishing, 2009(8):49-51.
[15] 张 峰, 王旭辉, 肖耀坤. 铝和铝合金电镀前处理工艺及其对镀层结合力的影响[J]. 电镀与涂饰, 2005, 24(10):20-21.
ZHANG F, WANG X H, XIAO Y K. Pre-plating processes and their influences on deposit adhesion for aluminum and its alloy[J]. Electroplating & Finishing, 2005, 24(10):20-21.
