Today is Email Alert  RSS

Research on the Corrosion Rate Prediction Method of Materials Based on Modal Analysis

Expand
  • 1.College of Mechanical and Electrical Engineering, Wuhan Donghu University, Wuhan 430212, China;2.College of Naval Architecture and Ocean Engineering, Naval University of Engineering, Wuhan 430033, China;3.Equipment Support Room of Donghai, Shanghai 200001, China

Received date: 2021-09-25

  Revised date: 2021-10-27

  Accepted date: 2021-11-21

  Online published: 2023-12-26

Abstract

Corrosion rate is an important parameter to evaluate the corrosion degree of materials, especially for the safe and reliable use of materials.In order to predict the corrosion rate of materials by the modal analysis of corroded materials, according to the damage mechanics theory of material, the damage of material could be expressed as loss factor ω, which could be introduced into the process of material corrosion damage.When the material was under uniform corrosion, the functional relationship between materials corrosion damage factor ω with corrosion rate v and time t was analyzed.Additionally, for gaining the expression of corrosion damage factor, according to the theory of elastic material vibration, the relationship between corrosion damage factor ω and natural frequency ratio  of materials before and after corrosion was studied.On this basis, a uniform corrosion rate prediction model based on modal analysis was further built.The theoretical analysis and calculation showed that the model was feasible to predict the average corrosion rate of materials, and the prediction results had reference value for the evaluation of the corrosion degree of materials, which also provided a new prediction method for the prediction of corrosion rate.

Cite this article

CHEN Yong-hong, HU Ping , ZUO Hui-zi, MING Ting-Tao . Research on the Corrosion Rate Prediction Method of Materials Based on Modal Analysis[J]. Materials Protection, 2022 , 55(2) : 48 -53 . DOI: 10.16577/j.issn.1001-1560.2022.0037

Outlines

/