[1] 曹建春,刘清友,雍岐龙,等.铌对高强度低合金钢的组织和强化机制的影响[J].钢铁,2006,41(8): 60-63.
CAO J C, LIU Q Y, YONG Q L, et al. The effect of niobium on the microstructure and strengthening mechanism of high strength low alloy steel [J]. Iron and Steel, 2006, 41 (8): 60-63.
[2] 施雄樑,张建平,刘永刚,等.连续退火工艺对低硅型冷轧低合金高强钢板力学性能的影响[J].北京科技大学学报,2008,30(8):870-874.
SHI X L, ZHANG J P, LIU Y G, et al. Effect of continuous annealing process on mechanical properties of low silicon cold rolled low alloy high strength steel sheet [J]. Journal of Beijing University of Science and Technology, 2008, 30(8): 870-874.
[3] 甘晓龙,岳江波,张 青.加热温度对钛铌复合微合金化高强钢析出和性能的影响[J].钢铁钒钛,2012,33(2):71-76.
GAN X L, YUE J B, ZHANG Q. Effect of heating temperature on precipitation and properties of Ti-Nb composite microalloyed high-strength steel [J]. Iron Steel Vanadium Titanium, 2012, 33 (2): 71-76.
[4] 康华伟.冷轧热镀锌线的工艺技术探讨[J].山东冶金,2016,38(3):8-10.
KANG H W. Discussion on process technology of cold rolling hot galvanizing line [J]. Shandong Metallurgical, 2016, 38 (3): 8-10.
[5] 刘鹏洋,周和荣,但佳永,等.中性盐雾腐蚀环境中B340LA钢板的腐蚀周期性研究 [J].材料保护,2018,51(12):28-32.
LIU P Y, ZHOU H R, DAN J Y, et al. Study on corrosion periodicity of B340LA steel plate in neutral salt spray corrosion environment [J] . Materials Protection, 2018, 51 (12): 28-32
[6] 康华伟.汽车用冷轧HSLA钢带的涂装性能研究与分析 [J].材料保护,2021,54(12):132-136.
KANG H W. Research and analysis on coating performance of cold-rolled HSLA steel strip for automobile [J] . Materials Protection, 2021, 54 (12): 132-136.
[7] 魏宝民,何召龙,王孝建,等.材料成分对热镀锌钢板性能及表面质量的影响[J].中国冶金,2020,30(10):71-75.
WEI B M, HE Z L, WANG X J, et al. Effect of material composition on properties and surface quality of hot-dip galvanized steel sheet [J]. China Metallurgy, 2020, 30 (10): 71-75.
[8] 康永林,唐 荻,王先进.汽车板的成分组织及工艺控制[J].轧钢,1996,12(6):53-56.
KANG Y L, TANG D, WANG X J. Composition, structure and process control of automobile plate [J]. Steel Rolling, 1996, 12 (6): 53-56.
[9] 王 瑾,罗晓阳, 赵小龙,等.磷、钛对含磷IF高强钢织构的影响[J].中国冶金,2017,27(2):28-32.
WANG J, LUO X Y, ZHAO X L, et al. Effect of phosphorus and titanium on the texture of IF high-strength steel containing phosphorus [J]. China Metallurgy, 2017, 27 (2): 28-32.
[10] 于 洋,惠亚军,王 畅,等. 高强IF钢第二相粒子的应变诱导析出行为[J].中国冶金,2018,28(7):13-18.
YU Y, HUI Y J, WANG C, et al. Strain induced precipitation behavior of the second phase particles in high-strength IF steel [J]. China Metallurgy, 2018, 28 (7): 13-18.
[11] 胡华东.热镀锌汽车外板烘烤硬化钢H220BD+Z 产品开发[J].钢铁钒钛,2018,39(5):157-161.
HU H D. Product development of baking hardened steel H220BD+Z for hot-dip galvanized automobile outer plate [J]. Iron Steel Vanadium and Titanium, 2018, 39 (5): 157-161.
[12] 杨红来,杨源华,张亚君. 低合金高强钢冷轧产品HC420LA 的研制与开发[J]. 江西冶金,2020,40(3):18-22.
YANG H L, YANG Y H, ZHANG Y J. Research and development of cold rolled low alloy high strength steel product HC420LA [J]. Jiangxi Metallurgy, 2020, 40 (3): 18-22.
[13] 马江南,杨才福,王瑞珍.微合金钢回温变形时的组织转变和铁素体动态再结晶行为[J]. 材料工程,2015,43(11):24-31.
MA J N, YANG C F, WANG R Z. Microstructure transformation and dynamic recrystallization behavior of ferrite in microalloyed steel during warm deformation [J]. Materials Engineering, 2015, 43 (11): 24-31.
[14] 康 涛,陈 斌,赵征志,等.600MPa级低合金高强钢的组织调控与工艺优化[J].中国冶金,2019,29(9):45-50.
KANG T, CHEN B, ZHAO Z Z, et al. Structure control and process optimization of 600MPa low alloy high strength steel [J]. China Metallurgy, 2019, 29 (9): 45-50.
[15] 李春诚,佟铁印,王亚东,等.连退工艺对低合金高强钢HC300LA力学性能的影响[J].中国冶金,2017,27(3):28-31.
LI C C, TONG T Y, WANG Y D, et al. Effect of continuous annealing process on mechanical properties of low alloy high strength steel HC300LA [J]. China Metallurgy, 2017, 27 (3): 28-31.
[16] 尹翠兰,康华伟.平整横折纹产生原因分析与改进措施[J].山东冶金,2011,33(6):23-24.
YIN C L, KANG H W. Cause analysis and improvement measures for flat horizontal crease [J]. Shandong Metallurgical, 2011, 33 (6): 23-24.
[17] 陈小虎,李守华,曹晓恩,等.汽车用低合金高强钢HC500LA连续退火工艺[J].材料热处理学报,2021,42(4):132-137.
CHEN X H, LI S H, CAO X E, et al. Continuous annealing process of low alloy high strength steel HC500LA for automobile [J]. Journal of Material Heat Treatment, 2021, 42 (4): 132-137.
