Today is Email Alert  RSS

Investigation of the Preparation of Steel-Based Superamphiphobic Surface by Ni-nSiO2 Nanocomposite Electroplating

Expand
  • 1. Department of Navigation, Dalian Naval Academy, Dalian 116018, China;2. School of Naval Architecture, Dalian University of Technology, Dalian 116023, China

Received date: 2022-07-24

  Revised date: 2022-08-06

  Accepted date: 2022-09-21

  Online published: 2023-07-25

Abstract

In order to realize the preparation of a superamphiphobic surface on the steel substrate and simultaneously avoid damage to the physical properties of the steel substrate surface, a preparation process for preparing superamphiphobic surface on marine Q235 steel was proposed on the basis of Ni-nSiO2 nanocomposite electrodeposition technology. Firstly, a micro-nano double-roughness structure suitable for superamphiphobic properties was constructed on the surface of the steel substrate by nanocomposite electroplating and liquid phase deposition,and then the surface was modified with heptadecafluorodecyl trimethoxysilane. By designing a three - factor orthogonal experiment, the preparation process parameters that could realize superamphiphobic surface were obtained by changing the electroplating parameters (temperature, time, current) and analyzing the influence of each parameter on the surface wettability. Additionally, the microscopic morphology of the as-prepared superamphiphobic surface was analyzed by scanning electron microscopy. Results showed that when the current density was 12.5 A/dm2, the magnetic stirring speed was 200 r/min, the electroplating time was 50 min, and the temperature was 60 ℃, the as-prepared steel-based superamphiphobic surface presented a contact angle of 154° with water and a contact angle of 151° with oil. Under the above parameters, the combination of micro-nano rough morphology obtained through the composite electrodeposition process and low surface energy modification made the surface exhibited superamphiphobic properties.

Cite this article

CHENG Hong, WEI Zhi-yuan, WANG Yong, JIANG Wen-xuan . Investigation of the Preparation of Steel-Based Superamphiphobic Surface by Ni-nSiO2 Nanocomposite Electroplating[J]. Materials Protection, 2023 , 56(1) : 58 -63 . DOI: 10.16577/j.issn.1001-1560.2023.0009

References

[ 1] 陈美玲, 张力明, 杨 莉,等. 低表面能船舶防污涂料的疏水结构及防污性能[J]. 船舶工程, 2010, 32(6):64-67.CHEN M L, ZHANG L M, YANG L, et al. Hydrophobic structure and antifouling performance of the low surface energy marine coating[J]. Ship Engineering,2010,32(6):64-67.

[ 2] ZHANG P, LV F Y . A review of the recent advances in superhydrophobic surfaces and the emerging energy-related applications[J]. Energy, 2015, 82:1 068-1 087.

[ 3] SIMPSON J T, HUNTER S R, AYTUG T. Superhydrophobic materials and coatings: a review[J]. Reports on Progress in Physics, 2015, 78(8):086 501.

[ 4] 胡云楚, 梁 金, 王 洁,等. 一种超双疏自清洁表面精细纳米结构的人工种植方法:CN103143493A[P]. 2013-02-26.HU Y C, LIANG J, WANG J, et al. The artificial planting method of self - cleaning surface super - amphiphobic with nanostructures: CN103143493A[P]. 2013-02-26.

[ 5] KUMAR R T R, MOGENSEN K B, Bøggild P . Simple Approach to Superamphiphobic Overhanging Silicon Nanostructures[J]. Journal of Physical Chemistry C, 2010, 114(7):2 936-2 940.

[ 6] GAO L K, XIAO S L, GAN W T, et al. Durable superamphiphobic wood surfaces from Cu2O film modified with fluorinated alkyl silane[J]. RSC ADV,2015,5(119):98 203-98 208.

[ 7] XI J M,LIN F,LEI J . A general approach for fabrication of superhydrophobic and superamphiphobic surfaces[J]. Applied Physics Letters, 2008, 92(5):053 102.

[ 8] 禹 营, 汪家道, 陈大融. 超疏水表面在减阻中的应用:2006 全国摩擦学学术会议论文集(一)[C].哈尔滨:中国机械工程学会摩擦学分会, 2006.YU Y,WANG J D,CHEN D R. The application of superamphiphobic surface in drag reduction:Proceeding of 2006 National Tribology Conference (1) [C]. Harbin: Tribology Branch of Chinese Mechanical Engineering Society, 2006.

[ 9] 张海峰, 刘晓为, 王 锋,等. 铝及其合金超双疏表面制备方法: CN103290418A[P]. 2013-06-24.ZHANG H F, LIU X W, WANG F, et al. The method of preparation of aluminum and its alloys Superamphiphobic surface: CN103290418A[P]. 2013-06-24.

[10] PATANKAR N A. Transition between superhydrophobic states on rough surfaces[J]. Langmuir the Acs Journal of Surfaces & Colloids, 2004, 20(17):7 097-7 102.

[11] CHOI H J, CHOO S, SHIN J H, et al. Fabrication of Superhydrophobic and Oleophobic Surfaces with Overhang Structure by Reverse Nanoimprint Lithography[J]. Journal of Physical Chemistry C, 2013, 117(46):24 354-24 359.

[12] ZHANG G W, LIN S D, WYMAN I, et al. Robust Superamphiphobic Coatings Based on Silica Particles Bearing Bifunctional Random Copolymers[J]. Acs Applied Materials &Interfaces, 2013, 5(24):13 466-13 477.

[13] DENG X, SCHELLENBERGER F, PAPADOPOULOS P,et al. Liquid Drops Impacting Superamphiphobic Coatings[J]. Langmuir the Acs Journal of Surfaces & Colloids,2013, 29(25):7 847-7 856.

[14] TADANAGA K,MORINAGA J,MATSUDA A,et al. Superhydrophobic-Superhydrophilic Micropatterning on Flowerlike Alumina Coating Film by the Sol - Gel Method[J].Chemistry of Materials, 2004, 12(3): 590-592.

[15] TIAN Y,LIU H Q,DENG Z F.Electrochemical growth of gold pyramidal nanostructures:toward super - amphiphobic surfaces[J].Chemistry of Materials: A Publication of the American Chemistry Society,2006,18:5 820-5 822

[16] QIAN B R, SHEN Z Q . Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates[J]. Langmuir the Acs Journal of Surfaces & Colloids, 2005, 21(20):9 007-9 009.

[17] XU Q F, MONDAL B, LYONS A M . Fabricating Superhydrophobic Polymer Surfaces with Excellent Abrasion Resistance by a Simple Lamination Templating Method[J]. Acs Applied Materials & Interfaces, 2011, 3(9):3 508-3 514.

[18] XU LB, CHEN W, MULCHANDANI A, et al. Reversible Conversion of Conducting Polymer Films from Superhydrophobic to Superhydrophilic[J]. Angewandte Chemie, 2005,44(37):6 009-6 012.

[19] 冯立明. 电镀工艺学[M]. 北京:化学工业出版社, 2010.FENG L M. Electroplating technology[M]. Beijing: Chemical Industry Press, 2010.

[20] Tohru Watanabe. Nano-plating :microstructure control theory of plated film and data base of plated film microstructure[M]. Amsterdam :Elsevier, 2004.
Outlines

/