Research Progress of Titanium Alloy Coating Prepared by Argon Arc Cladding

CHEN Zhihui, MENG Junsheng, DING Hao, LI Qindong, HAO Chenfan, CHEN Mingxuan

doi:10.16577/j.issn.1001-1560.2023.0298

Materials Protection >

2023 , Vol. 56 >Issue 12: 140 - 147

DOI: https://doi.org/10.16577/j.issn.1001-1560.2023.0298

Research Progress of Titanium Alloy Coating Prepared by Argon Arc Cladding

Expand

(1. Naval Architecture and Port Engineering College, Shandong Jiaotong University, Weihai 264200, China;(2. China Construction Fifth Engineering Bureau Co., Ltd., Changsha 410000, China)

Received date: 2023-06-25

Revised date: 2023-07-18

Accepted date: 2023-08-22

Online published: 2024-01-09

Fold

Abstract

In order to enable titanium alloys to cope with the service environment of complex working conditions, the argon arc cladding technology has been currently used to modify the surface of titanium alloys to prepare particle reinforced titanium-based composite coatings with dispersion distribution, strong adhesion and excellent performance. Herein, the types of reinforcing particles were introduced briefly, and the effects of different reinforcing particles on the multiphase composite coatings were compared. Moreover, the influence of argon arc cladding process parameters on the composition and distribution of coating reinforcement particles was analyzed, and it was proposed that the high entropy, amorphous, nanocrystalline coatings and simulation tests to explore process parameters were the future development trends.

Key words： titaniumalloy; argon arc cladding; composite coating; reinforcing particles; wear resistance; hardness

Cite this article

CHEN Zhihui, MENG Junsheng, DING Hao, LI Qindong, HAO Chenfan, CHEN Mingxuan . Research Progress of Titanium Alloy Coating Prepared by Argon Arc Cladding[J]. Materials Protection, 2023 , 56(12) : 140 -147 . DOI: 10.16577/j.issn.1001-1560.2023.0298

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article