In order to investigate the effect of microalloying element composite adjustment on the corrosion resistance of Q345qE bridge steel, the influences of alloy element Cr, Ni, and Cu composite adjustment on the corrosion resistance of Q345qE bridge steel were studied by confocal laser scanning microscopy (CLSM), electrochemical workstation, field emission scanning electron microscopy (FE-SEM), and X-ray diffraction (XRD). Results showed that the compactness and protectiveness of the rust layer were improved after the composite adjustment of Cr, Ni and Cu microalloying elements. The Cr element in the rust layer on the Q345qE bridge steel surface could be enriched in the inner rust layer, which effectively blocked the penetration and transmission of corrosive ions such as Cl- and enhanced the protective ability of the rust layer on the substrate. After alloying element adjustment, the proportion of α-FeOOH that was more stable than γ-FeOOH in the rust layer of Q345qENH steel increased. Generally, Q345qE bridge steel with composite adjustment by microalloying elements possessed better corrosion resistance compared to ordinary Q345qE in 3.5% NaCl solution.
YUAN Hao
,
LI Xue-dong
,
CHENG Bing-gui
,
LIU Chao
,
YANG Shu-feng
,
LI Xiao-gang
. Effect of Microalloying Element Composite Adjustment on the Corrosion Resistance of Q345qE Bridge Steel[J]. Materials Protection, 2023
, 56(6)
: 46
-54
.
DOI: 10.16577/j.issn.1001-1560.2023.0134
[1] DOMINGO C, RodríGuez-Clemente R, BLESA M. Morphological properties of α-FeOOH, γ-FeOOH and Fe3O4 obtained by oxidation of aqueous Fe (II) solutions[J]. Journal of Colloid and Interface Science, 1994, 165(1): 244-252.
[2] TOMASHOV N. Development of the electrochemical theory of metallic corrosion[J]. Corrosion, 1964, 20(1): 7-14.
[3] KIMURA M, OHTA N, KIHIRA H. State of chlorides in rusts formed on 3 mass % Ni-added weathering steel[J]. ECS Transactions, 2009, 16(43): 63-69.
[4] YAMASHITA M, MIYUKI H, MATSUDA Y, et al. The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century[J]. Corrosion Science, 1994, 36(2): 283-299.
[5] KIM K, CHUNG Y, HWANG Y, et al. Effects of calcium modification on the electrochemical and corrosion properties of weathering steel[J]. Corrosion, 2002, 58(6). 479-489.
[6] 刘丽宏, 齐慧滨, 卢燕平,等. 耐候钢的腐蚀及表面稳定化处理技术[J]. 腐蚀与防护, 2002, 23(12): 515-518.
LIU L H, QI H B, LU Y P,et al. Corrosion and Surface Stabilization Treatment Technology of Weathering Steel[J]. Corrosion and Protection, 2002, 23(12): 515-518.
[7] 王成章. 热带海洋大气环境中钢腐蚀异常原因研究[D].重庆:重庆大学, 2006.
WANG C Z. Study on the causes of steel corrosion anomalies in the tropical marine atmosphere[D]. Chongqing : Chongqing University, 2006.
[8] KIMURA M, KIHIRA H, NOMURA M, et al. Corrosion protection mechanism of the advanced weathering steel (Fe-3.0 Ni-0.40 Cu) in a coastal area:Electrochemical Society Proceeding[C].[S.l.]: The Electrochemical Society, 2004, 14: 133-142.
[9] 周建龙, 李晓刚, 程学群,等. 深海环境下金属及合金材料腐蚀研究进展[J]. 腐蚀科学与防护技术, 2010, 22(1): 47-51.
ZHOU J L, LI X G, CHENG X Q, et al. Research progress on corrosion of metals and alloys in deep sea environment[J]. Corrosion Science and Protection Technology, 2010, 22(1): 47-51.
[10] 王振尧,于国才,韩 薇. 钢的大气暴露腐蚀与室内模拟加速腐蚀的相关性[J]. 腐蚀科学与防护技术,2004,16(2):70-73.
WANG Z Y, YU G C, HAN W. Investigation on interrelation of indoor accelerated corrosion and atmospheric exposure corrosion of steels[J]. Corrosion Science and Protection Technology,2004,16(2):70-73.
[11] HAO W, LIU Z, WU W, et al. Electrochemical characterization and stress corrosion cracking of E690 high strength steel in wet-dry cyclic marine environments[J]. Materials Science and Engineering: A, 2018, 710: 318-328.
[12] TIAN H, XIN J, LI Y, et al. Combined effect of cathodic potential and sulfur species on calcareous deposition, hydrogen permeation, and hydrogen embrittlement of a low carbon bainite steel in artificial seawater[J]. Corrosion Science, 2019, 158: 108089.
[13] YANG J, LU Y, GUO Z, et al. Corrosion behaviour of a quenched and partitioned medium carbon steel in 3.5 wt.% NaCl solution[J]. Corrosion Science, 2018, 130: 64-75.
[14] CUI Z, WANG L, NI H, et al. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates[J]. Corrosion Science, 2017, 118: 31-48.
[15] DELLA ROVERE C, ALANO J, SILVA R, et al. Characterization of passive films on shape memory stainless steels[J]. Corrosion Science, 2012, 57: 154-161.
[16] HIRSCHORN B, ORAZEM M E, TRIBOLLET B, et al. Constant-phase-element behavior caused by resistivity distributions in films: I. Theory[J]. Journal of The Electrochemical Society, 2010, 157(12): C452.
[17] 吴旭冉, 贾志军, 马洪运,等. 电化学基础 (Ⅲ)——双电层模型及其发展[J]. 储能科学与技术, 2013, 2(2): 152-156.
WU X R, JIA Z J, MA H Y, et al. Electrochemical basis (Ⅲ)——The electric double layer model and its development[J]. Energy Storage Science and Technology, 2013, 2(2): 152-156.
[18] GUO P, LA PLANTE E C, WANG B, et al. Direct observation of pitting corrosion evolutions on carbon steel surfaces at the nano-to-micro-scales[J]. Scientific Reports, 2018, 8(1): 1-12.
[19] LIU C, REVILLA R I, ZHANG D, et al. Role of Al2O3 inclusions on the localized corrosion of Q460NH weathering steel in marine environment[J]. Corrosion Science, 2018, 138: 96-104.