Research on Temperature Field of Adhesive Layer Modified by High-Current Pulsed Electron Beams

FANG Yang, ZHANG Zhiyang

doi:10.16577/j.issn.1001-1560.2024.0038

Materials Protection >

2024 , Vol. 57 >Issue 2: 92 - 97

DOI: https://doi.org/10.16577/j.issn.1001-1560.2024.0038

Research on Temperature Field of Adhesive Layer Modified by High-Current Pulsed Electron Beams

Expand

(1.Anhui Civil Aviation Airport Group， Hefei 231271， China； 2.Farasis Energy (Ganzhou) Co.， Ltd.， Ganzhou 341003， China)

FANG Yang (1995-)， Master， Assistant Engineer， Research Focus: Thermal Barrier Coating Materials for Engines， Tel.: 13909690859， E-mail:fangyang1995＠yeah.net

Received date: 2023-07-10

Revised date: 2023-10-22

Accepted date: 2023-11-10

Online published: 2024-03-08

Fold

Abstract

For exploring the influence of different energy density and different pulse width time on the temperature along the depth of theadhesive layer and the influence on the surface temperature， the finite element analysis software ABAQUS was employed to simulate the distribution of the temperature field in the adhesive layer during the process of high-current pulsed electron beam bombarding the surface of adhesive layer，and analyze the temperature field distribution under different conditions.Results showed that when the energy density was 4 J/cm2 and the pulse time was 6.0 μs， or when the energy density reached 6 J/cm2 and the pulse width was more than 1.5 μs， the adhesive layer could be partially melted to achieve the modification effect.

Key words： high-current pulsed electron beams (HCPEB); adhesive layer; MCrAlY; ABAQUS; temperature field

Cite this article

FANG Yang, ZHANG Zhiyang . Research on Temperature Field of Adhesive Layer Modified by High-Current Pulsed Electron Beams[J]. Materials Protection, 2024 , 57(2) : 92 -97 . DOI: 10.16577/j.issn.1001-1560.2024.0038

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article