Resolving the Quality Issues of Electrophoretic Coatings in Inner Cavities through Simulation Analysis Combined with Matrix Demonstration

WEI Lexia, LIU Wei, SONG Bing, CHANG Juntao

doi:10.16577/j.issn.1001-1560.2024.0169

2024 , Vol. 57 >Issue 7: 228 - 234

DOI: https://doi.org/10.16577/j.issn.1001-1560.2024.0169

Resolving the Quality Issues of Electrophoretic Coatings in Inner Cavities through Simulation Analysis Combined with Matrix Demonstration

Expand

(Liuzhou Wuling New Energy Vehicle Co., Ltd., Liuzhou 545007, China)

CHANG Juntao (1985－), Intermediate Engineer, Master, Research Focus: Painting Process Engineering and Coatings, Tel.: 18978042335, E-mail: changjuntao＠wuling.com.cn

Received date: 2024-04-23

Revised date: 2024-05-16

Accepted date: 2024-05-25

Online published: 2024-08-19

Fold

Abstract

During the verification of the electrophoretic dismantling process for a commercial vehicle product,serious quality defects were found in the electrophoretic paint film of the inner cavities of the A-pillar, B-pillar and C-pillar.The EcoatMaster electrophoretic simulation software was used to analyze the quality of electrophoretic coatings.To address the issue of paint film defects, a matrix-based combination verification scheme was adopted, which included adding electrophoretic process holes to the inner panels, setting motion vector boosting functions in the rectifier power supply and adding auxiliary anodes inside the vehicle body cabin.This approach successfully resolved the quality issues of electrophoretic paint film in the inner cavities of the A-pillar, B-pillar and C-pillar with high quality and low cost, thereby meeting the company’s product anti-corrosion quality requirements.

Key words： coating SE; anti-corrosion design; electrophoretic simulation; electrophoretic paint; auxiliary anode; rectifier power supply

Cite this article

WEI Lexia, LIU Wei, SONG Bing, CHANG Juntao . Resolving the Quality Issues of Electrophoretic Coatings in Inner Cavities through Simulation Analysis Combined with Matrix Demonstration[J]. Materials Protection, 2024 , 57(7) : 228 -234 . DOI: 10.16577/j.issn.1001-1560.2024.0169

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article