Research Progress of Oxygen Corrosion of Tubing Materials in Injection Environments in Oil and Gas Fields

SONG Wenwen, XIE Junfeng, ZHAO Mifeng, YUAN Juntao, TAN Fengling, FU Anqing, LI Xuanpeng

doi:10.16577/j.issn.1001-1560.2024.0230

Materials Protection >

2024 , Vol. 57 >Issue 10: 112 - 117

DOI: https://doi.org/10.16577/j.issn.1001-1560.2024.0230

Research Progress of Oxygen Corrosion of Tubing Materials in Injection Environments in Oil and Gas Fields

Expand

(1.PetroChina Tarim Oilfield Company， Korla 841000， China；2.State Key Laboratory of Oil and Gas Equipment， CNPC Tubular Goods Research Institute， Xi’an 710077， China；3.Xi’an Aode Petroleum Engineering Technology Co.， Ltd.， Xi’an 710075， China)

YUAN Juntao (1985-)， Senior Engineer， Ph.D， Research Focus: Corrosion and Protection in Oil and Gas Fields， E-mail: yuanjuntaolly＠163.com

Received date: 2024-01-29

Revised date: 2024-04-19

Accepted date: 2024-04-20

Online published: 2024-12-22

Supported by

CNPC Basic Research and Strategic Reserve Technology Research Fund Project[2022DQ03(2022Z-01)]； CNPC Science and Technology Project (2023ZZ11)

Fold

Abstract

The problem of pipe corrosion in oil and gas field injection wells is prominent， causing serious resource waste and safety hazards in the oil and gas industry， and oxygen corrosion has become one of the main causes of pipe perforation failure.Herein， this article reviewed the research progress on oxygen corrosion of pipes in oil and gas field injection environments in recent years， with a focus on the effects of injection well conditions and injection parameters (such as process conditions， temperature， oxygen content， flow rate， etc.) on oxygen corrosion of metal materials.Meanwhile，the mechanism and protection methods of oxygen corrosion were explored，and the shortcomings in current research were analyzed.Finally，based on the requirements of oil and gas field engineering，suggestions were put forward for future research in this field.

Key words： oxygen corrosion; injection well environment; injection parameter; oxygen content; tubing materials

Cite this article

SONG Wenwen, XIE Junfeng, ZHAO Mifeng, YUAN Juntao, TAN Fengling, FU Anqing, LI Xuanpeng . Research Progress of Oxygen Corrosion of Tubing Materials in Injection Environments in Oil and Gas Fields[J]. Materials Protection, 2024 , 57(10) : 112 -117 . DOI: 10.16577/j.issn.1001-1560.2024.0230

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article